TS120PLTR

TS120L Multifunction Telecom Switch Parameter Blocking Voltage Load Current Max On-Resistance Rating 350 120 35 Description Units VP mA  Features • Current Limited • 3750Vrms Input/Output Isolation • Low Drive Power Requirements (TTL/CMOS Compatible) • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • No Moving Parts • Small 8-Pin Package • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hook Switch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls The TS120L integrated circuit device combines a 350V, current-limited, normally open (1-Form-A) relay with a Darlington transistor optocoupler in a single package. The relay uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture, in which highly efficient GaAIAs infrared LEDs control the optically coupled output. Telecom circuit designers, using the TS120L, can now take advantage of two discrete functions in a single component that uses less space than traditional discrete component solutions. Approvals • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1175739 • EN/IEC 60950 Certified Component: TUV Certificate: B 10 05 49410 006 Ordering Information Part # TS120L TS120PL TS120PLTR TS120LS TS120LSTR Description 8-Pin DIP (50/Tube) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1000/Reel) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration + LED - Relay – LED - Relay Collector - Phototransistor Emitter - Phototransistor 1 8 2 7 3 6 4 5 Load - Relay (MOSFET Output) Load - Relay (MOSFET Output) LED - Phototransistor –/+ LED - Phototransistor +/– Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD Pb RoHS 2002/95/EC DS-TS120L-R03 ton e3 www.clare.com toff 1 TS120L Absolute Maximum Ratings @ 25ºC Parameter Relay Blocking Voltage Input Power Dissipation 1 Input Control Current, Relay Peak (10ms) Input Control Current, Detector Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / ºC 2 Derate linearly 6.67 mW / ºC Ratings 350 150 50 1 100 800 3750 -40 to +85 -40 to +125 Units VP mW mA A mA mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @25ºC: Relay Section Parameter Output Characteristics Load Current Continuous Peak Current Limit On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics Input to Output Capacitance Conditions Symbol Min Typ Max Units t=10ms IF=5mA IL=120mA VL=350V IL ILPK ICL RON ILEAK 130 - 170 - 120 350 210 35 1 mA mA mA  VL=50V, f=1MHz ton toff COUT - 25 2.5 2.5 - ms ms pF IL=120mA IF=5mA VR=5V IF IF VF VR IR 0.4 0.9 - 0.7 1.2 - 5 1.4 5 10 mA mA V V A - CI/O - 3 - pF Conditions Symbol Min Typ Max Units IC=10A VCE=5V, IF=0mA IC=0.15mA, IF=0.05mA IF=0.05mA, VCE=0.8V BVCEO ICEO VSAT CTR 20 300 50 100 0.5 1000 1000 0.8 - V nA V % IC=2mA, VCE=0.5V IF=5mA - IF VF VI/O 0.9 3750 1 1.2 3 - 2 1.4 - mA V pF Vrms IF=5mA, VL=10V A Electrical Characteristics @25ºC: Detector Section Parameter Output Characteristics Phototransistor Blocking Voltage Phototransistor Dark Current Saturation Voltage Current Transfer Ratio Input Characteristics Input Control Current Input Voltage Drop Input to Output Capacitance Isolation, Input to Output 2 www.clare.com R03 TS120L PERFORMANCE DATA: RELAY 25 20 15 10 5 25 20 20 15 10 5 0 0 1.17 25 1.19 1.21 1.23 Typical Turn-Off Time (N=50, IF=5mA, IL=120mADC, TA=25ºC) 15 10 5 0 0.3 1.25 0.9 1.5 2.1 2.7 3.3 3.9 0.05 0.15 0.25 0.35 0.45 0.55 0.65 LED Forward Voltage Drop (V) Turn-On Time (ms) Turn-Off Time (ms) Typical IF for Switch Operation (N=50, IL=120mADC, TA=25ºC) Typical IF for Switch Dropout (N=50, IL=120mADC, TA=25ºC) Typical On-Resistance Distribution (N=50, IF=2mA, IL=120mADC, TA=25ºC) 25 20 Device Count (N) Device Count (N) 25 Device Count (N) Device Count (N) Device Count (N) 30 15 10 5 35 30 20 Device Count (N) 35 Typical Turn-On Time (N=50, IF=5mA, IL=120mADC, TA=25ºC) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25ºC) 15 10 5 25 20 15 10 5 0 0 0.39 0.65 0.91 1.17 1.43 1.69 0 0.39 1.95 0.65 0.91 1.17 1.43 1.69 1.95 17.0 17.4 35 17.8 18.2 18.6 19.0 19.4 On-Resistance (:) LED Current (mA) LED Current (mA) Typical Blocking Voltage Distribution (N=50, TA=25ºC) Device Count (N) 30 25 20 15 10 5 0 377.5 388.5 399.5 410.5 421.5 432.5 443.5 1.6 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 Temperature (ºC) 80 100 120 Typical Turn-On Time vs. LED Forward Current (IL=120mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Typical Turn-Off Time vs. LED Forward Current (IL=120mADC) 0.7 0.6 Turn-Off Time (ms) 1.8 Typical LED Forward Voltage Drop vs. Temperature (IL=120mADC) Turn-On Time (ms) LED Forward Voltage Drop (V) Blocking Voltage (VP) 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 TS120L 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 IF=5mA IF=10mA IF=20mA -40 3.0 -20 0 20 40 60 80 60 50 40 30 20 0 -20 0 20 40 60 80 100 -40 0 20 40 60 Temperature (ºC) Typical IF for Switch Operation vs. Temperature (IL=120mADC) Typical IF for Switch Dropout vs. Temperature (IL=120mADC) Typical Load Current vs. Temperature 3.0 1.5 1.0 1.5 1.0 0.5 0 0 -20 0 20 40 60 80 140 120 100 IF=20mA IF=10mA IF=5mA 80 60 40 20 0 -40 100 -20 0 20 40 60 80 100 -40 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Typical Load Current vs. Load Voltage (IF=2mA, TA=25ºC) Typical Blocking Voltage vs. Temperature Typical Leakage vs. Temperature Measured across Pins 7&8 0.016 100 425 0.014 420 0.012 0 -50 -100 Leakage (PA) 430 Blocking Voltage (VP) 150 415 410 405 -1 0 1 2 -20 0 20 40 60 80 100 Temperature (ºC) Load Voltage (V) 0.010 0.008 0.006 0.002 -40 3 120 0.004 400 395 -150 -2 -20 Temperature (ºC) 50 100 160 2.0 0.5 80 180 Load Current (mA) 2.0 -3 -20 Temperature (ºC) Temperature (ºC) 2.5 -40 Typical On-Resistance vs. Temperature (IF=5mA, IL=120mADC) 10 -40 LED Current (mA) LED Current (mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 2.5 Load Current (mA) Typical Turn-Off Time vs. Temperature (IF=5mA, IL=120mADC) On-Resistance (:) Typical Turn-On Time vs. Temperature (IL=120mADC) Turn-Off Time (ms) Turn-On Time (ms) PERFORMANCE DATA: RELAY (cont.) 0 -40 -20 0 20 40 60 80 100 Temperature (ºC) Load Current (A) Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 TS120L PERFORMANCE DATA: DETECTOR Typical Normalized CTR vs. Temperature (VCE=0.8V) 3.0 2.0 2.5 1.5 1.0 0.5 Typical Collector Current vs. Forward Current (VCE=0.8V) 16 IF=1mA IF=2mA IF=5mA IF=10mA IF=15mA IF=20mA 2.0 1.5 Collector Current (mA) 2.5 Normalized CTR (%) Normalized CTR (%) Typical Normalized CTR vs. Forward Current (VCE=0.8V) 1.0 0.5 0 0 0 2 4 6 8 10 12 14 Forward Current (mA) 16 18 20 -40 -20 0 20 40 60 Temperature (ºC) 80 100 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 Forward Current (mA) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 5 TS120L Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating TS120L / TS120PL / TS120LS MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time TS120L / TS120LS 250ºC for 30 seconds TS120PL 260ºC for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb 6 RoHS 2002/95/EC e3 www.clare.com R03 TS120L Mechanical Dimensions TS120L 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 PCB Hole Pattern 7.620 ± 0.254 (0.300 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 0.457 ± 0.076 (0.018 ± 0.003) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 TYP (0.01) 7.620 ± 0.127 (0.300 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) Dimensions mm (inches) 0.889 ± 0.102 (0.035 ± 0.004) TS120PL 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 7.620 ± 0.254 (0.300 ± 0.010) 9.398 ± 0.127 (0.370 ± 0.005) Pin 1 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 0.65 (0.0255) 2.159 ± 0.025 (0.085 ± 0.001) 0.457 ± 0.076 (0.018 ± 0.003) 0.864 ± 0.120 (0.034 ± 0.004) TS120LS Dimensions mm (inches) 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 0.635 ± 0.127 (0.025 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) 8.70 (0.3425) 1.55 (0.0610) 0.203 ± 0.013 (0.008 ± 0.0005) 9.652 ± 0.381 (0.380 ± 0.015) PCB Land Pattern PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.127 (0.010 ± 0.0005) 0.65 (0.0255) 4.445 ± 0.127 (0.175 ± 0.005) Dimensions mm (inches) 0.813 ± 0.120 (0.032 ± 0.004) R03 www.clare.com 7 TS120L Mechanical Dimensions TS120LS Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=16.00 (0.63) Bo=10.30 (0.406) K0 =4.90 (0.193) Ao=10.30 (0.406) K1 =4.20 (0.165) Embossed Carrier Embossment P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 TS120PL Tape & Reel 330.2 DIA. (13.00 DIA.) W = 16.00 (0.63) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier Embossment P = 12.00 (0.472) User Direction of Feed Ao = 10.30 (0.406) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 8 Specification: DS-TS120L-R03 ©Copyright 2011, Clare, Inc. All rights reserved. Printed in USA. 10/11/2011