VCC2X105-16IO7

VCC 2x105 Thyristor Modules ECO-PAC 2 Preliminary Data VRSM VDSM V 900 1300 1500 1700 1900 Symbol ITRMS ITAVM ITSM TC = 85°C; 180° sine TVJ = 45°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine VRRM VDRM V 800 1200 1400 1600 1800 ITRMS = 2x180A ITAVM = 2x105A VRRM = 800-1800 V Typ VCC VCC VCC VCC VCC 2x105 2x105 2x105 2x105 2x105 08io7 12io7 14io7 16io7 18io7 Maximum Ratings 180 105 2250 2400 2000 2150 25300 23900 20000 19100 150 A A A A A A A 2s A 2s A 2s A 2s A/µs Features • • • • Isolation voltage 3600 V~ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Conditions TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine I2dt TVJ = 45°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Applications • • • • DC motor control Light and temperature control Softstart AC motor controller Solid state switches TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine (di/dt)cr TVJ = 125°C; repetitive, IT = 250 A f = 50 Hz; tP = 200 µs; VD = 2/3VDRM; IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/µs; TVJ = 125°C; VDR = 2/3VDRM RGK = ∞, method 1 (linear voltage rise) TVJ = 125°C; IT = ITAVM; tP = 30 ms tP = 300 ms Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling • High power density • Small and light weight 500 1000 ≤ 10 ≤5 0.5 10 -40 ... + 125 125 -40 ... + 125 A/µs V/µs W W W V °C °C °C V~ V~ Nm lb.in. g (dv/dt)cr PGM PGAVM VRGM TVJ TVJM Tstg VISOL Md Weight 50/60 Hz, RMS IISOL < 1 mA Mounting torque typ. t = 1 min t=1s (M4) 3000 3600 1.5 - 2.0 14 - 18 26 Data according to IEC 60747 refer to a single thyristor unless otherwise stated IXYS reserves the right to change limits, test conditions and dimensions. © 2001 IXYS All rights reserved 1-2 135 VCC 2x105 Component Symbol ID, IR VT VTO rT VGT IGT VGD IGD IL IH tgd RthJC RthCH dS dA a Conditions TVJ = 125°C; VR = VRRM; VD = VDRM IT = 300 A; TVJ = 25°C For power-loss calculations only VD = 6 V; VD = 6 V; TVJ = 125°C; TVJ = 125°C; TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C VD = 2/3VDRM VD = 2/3VDRM Characteristic Values min. typ. max. 5 1.5 mA V 0.8 V 2.4 mΩ 1.5 1.6 150 200 0.2 10 450 200 2 V V mA mA V mA mA mA µs TVJ = 25°C; tP = 10 ms IG = 0.45 A; diG/dt = 0.45 A/µs TVJ = 25°C; VD = 6 V; RGK = ∞ TVJ = 25°C; VD = ½ VDRM IG = 0.45 A; diG/dt = 0.45 A/µs per Thyristor; DC per module per Thyristor; DC per module Creeping distance on surface Creeping distance in air Max. allowable acceleration 0,2 0,1 0.26 K/W 0.13 K/W K/W K/W 11.2 mm 5.0 mm 50 m/s2 Dimensions in mm (1 mm = 0.0394") © 2001 IXYS All rights reserved 2-2