VCO132-12IO7

VCO 132 Advanced Technical Information ITRMS = 200 A ITAVM = 130 A VRRM = 1200/1600 V Thyristor Modules ECO-PAC 2 ACE-1 VRSM VRRM VDSM V VDRM V Typ 1300 1700 1200 1600 VCO 132-12io7 VCO 132-16io7 E-3 K-12 32 VC O1 SVX-18 Symbol ITRMS ITAVM ITSM I2t (di/dt)cr Conditions Maximum Ratings TC = 85°C; TVJ = 130°C; 180° sine TVJ = 45°C; VR = 0 200 130 A A t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 3600 3850 A A TVJ = 125°C; t = 10 ms VR = 0 t = 8.3 ms (50 Hz) (60 Hz) 3200 3420 A A TVJ = 45°C; VR = 0 t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 64 800 62 300 A2s A2s TVJ = 125°C; t = 10 ms VR = 0 t = 8.3 ms (50 Hz) (60 Hz) 51 200 49 100 A2s A2s 150 A/µs 500 A/µs TVJ = 125°C; repetitive, IT = 250 A f = 50 Hz; tp = 200 µs; VD = 2/3 VDRM; IG = 0.5 A; diG /dt = 0.5 A/µs non repetitive, IT = ITAVM (dv/dt)cr TVJ = 125°C; VD = 2/3 VDRM; RGK = ∞; method 1 (linear voltage rise) 1000 V/µs PGM TVJ = 125°C; IT = IT(AV)M; < 10 < 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+130 150 -40...+125 °C °C °C 3000 3600 V~ V~ 1.5 - 2.0 14 - 18 Nm lb.in. 24 g tp = 30 ms tp = 300 ms PGAVM VISOL 50/60 Hz, RMS IISOL < 1 mA Md Mounting torque (M4) Weight Typical including screws t = 1 min t=1s Features • Isolation voltage 3600 V~ • Planar glass passivated chips • Low forward voltage drop • Leads suitable for PC board soldering Applications • DC Motor control • Light and temperature control • Softstart AC motor controller • Solid state switches Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling • High power density • Small and light weight Data according to IEC 60747 and refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. © 2017 IXYS All rights reserved 20170321a 1-2 Advanced Technical Information Symbol Conditions ID, IR VR / VD = VRRM / VDRM TVJ = 125°C VT IT = 200 A TVJ = 25°C VT0 rt For power-loss calculations only VGT VD = 6 V IGT VD = 6 V VGD IGD Characteristic Values typ. max. 10 mA 1.3 V 0.80 1.65 V mΩ TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C 1.5 1.6 300 400 V V mA mA VD = 2/3 VDRM; TVJ = 125°C 0.2 10 V mA IL tp = 10 µs; IG = 0.5 A; diG /dt = 0.5 A/µs TVJ = 25°C 450 mA IH VD = 6 V; RGK = ∞; TVJ = 25°C 200 mA tgd VD = ½VDRM IG = 0.5 A; diG /dt = 0.5 A/µs TVJ = 25°C 2 µs 0.25 K/W K/W 11.2 5.0 50 mm mm m/s2 RthJC RthJH per thyristor; DC current dS dA a Creeping distance on surface Creepage distance in air Maximum allowable acceleration VCO 132 0.35 Dimensions in mm (1 mm = 0.0394") IXYS reserves the right to change limits, test conditions and dimensions. © 2017 IXYS All rights reserved 20170321a 2-2