VHF25-12IO7

VHF 25 Single Phase Rectifier Bridge IdAV = 32 A VRRM = 600-1200 V Preliminary data VRSM VDSM VRRM VDRM V V 700 900 1300 600 800 1200 K Type G A H N VHF 25-06io7 VHF 25-08io7 VHF 25-12io7 D Symbol Test Conditions IdAV ① TC = 85°C, module 32 A ITAVM/IFAVM TC = 85°C; (180° sine ; per thyristor) 16 A ITSM/IFSM TVJ = 45°C; VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 180 190 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 150 A2s A2s t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 160 150 2 As A2s TVJ = TVJM repetitive, IT = 20 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.15 A non repetitive, IT = ITAVM diG/dt = 0.15 A/ms 100 A/ms 500 A/ms 500 V/ms 10 V 5 2.5 0.5 W W W -40...+125 125 -40...+125 °C °C °C 2500 3000 V~ V~ I2t TVJ = TVJM VR = 0 (di/dt)cr (dv/dt)cr Maximum Ratings TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) VRGM PGM TVJ = TVJM IT = ITAVM tp = 30 ms tp = 300 ms PGAVM TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL £ 1 mA Md Mounting torque (M4) Weight typ. t = 1 min t=1s £ £ 1.5 - 2 14 - 18 18 Features • Package with DCB ceramic base plate • Isolation voltage 3000 V~ • Planar passivated chips • Low forward voltage drop • Leads suitable for PC board soldering Applications Supply for DC power equipment DC motor control ● ● Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability • Small and light weight Nm lb.in. g 002 Data according to IEC 60747 refer to a single diode/thyristor unless otherwise stated ① for resistive load at bridge output. IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 1-2 VHF 25 Symbol Test Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM £ 5 VT IT £ 1.6 V VT0 rT For power-loss calculations only (TVJ = 125°C) 0.85 27 V mW VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL = 20 A; TVJ = 25°C mA TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C £ £ £ £ 1.5 2.5 25 50 V V mA mA VD = 2/3 VDRM £ £ 0.2 3 V mA TVJ = 25°C; tP = 10 ms IG = 0.1 A; diG/dt = 0.1 A/ms £ 75 mA IH TVJ = 25°C; VD = 6 V; RGK = ¥ £ 50 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.1 A; diG/dt = 0.1 A/ms £ 2 ms RthJC per thyristor; DC per module per thyristor; DC per module 1.3 0.22 1.8 0.3 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 11.2 9.5 50 mm mm m/s2 RthJK dS dA a 002 Dimensions in mm (1 mm = 0.0394") © 2000 IXYS All rights reserved 2-2