VHFD37-16IO1

VHFD 37 VRRM = 800-1600 V IdAVM = 40 A Half Controlled Single Phase Rectifier Bridge Including Freewheeling Diode and Field Diodes VRSM VDSM VRRM VDRM V V 900 1300 1700 800 1200 1600 Type 3 1 2 5 VHFD 37-08io1 VHFD 37-12io1 VHFD 37-16io1 6 8 10 Bridge and Freewheeling Diode Symbol Conditions IdAV IdAVM IFRMS, ITRMS TH = 85°C, module module per leg IFSM, ITSM TVJ = 45°C; VR = 0 V I2t (di/dt)cr (dv/dt)cr Maximum Ratings 36 40 31 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 320 350 A A TVJ = TVJM VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 280 310 A A TVJ = 45°C VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 520 A2s A2s TVJ = TVJM VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 390 400 A2s A2s 150 A/μs 500 A/μs Advantages Easy to mount with two screws Space and weight savings Improved temperature and power cycling 1000 V/μs Dimensions in mm (1 mm = 0.0394") TVJ = 125°C repetitive, IT = 50 A f = 50 Hz, tP = 200 μs VD = 2/3 VDRM IG = 0.3 A, non repetitive, IT = 0.5 IdAV diG/dt = 0.3 A/μs TVJ = T(vj)m; VDR = 2/3 VDRM RGK = ∞; method 1 (linear voltage rise) VRGM PGM Features Package with DCB ceramic base plate Isolation voltage 3600 V~ Planar passivated chips Blocking voltage up to 1600 V Low forward voltage drop Leads suitable for PC board soldering UL registered E 72873 TVJ = TVJM IT = 0.5 IdAVM tp = 30 μs tp = 500 μs tp = 10 ms PGAVM TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL ≤ 1 mA t = 1 min t=1s dS dA a Creep distance on surface Strike distance in air Max. allowable acceleration Md Mounting torque (M5) (10-32 UNF) Weight IXYS reserves the right to change limits, test conditions and dimensions. © 2010 IXYS All rights reserved 10 V 10 5 1 0.5 W W W W -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ 12.7 9.4 50 mm mm m/s2 2-2.5 18-22 35 Nm lb.in. g ≤ ≤ ≤ Applications Supply for DC power equipment DC motor control 20100705a 1-3 VHFD 37 Symbol Conditions Characteristic Values IR, ID VR = VRRM; VD = VDRM VT, VF IT, IF = 45 A; TVJ = 25°C VT0 rT For power-loss calculations only (TVJ = 125°C) TVJ = TVJM TVJ = 25°C ≤ ≤ 5 0.3 mA mA ≤ 1.45 V 0.85 13 V mΩ VD = 6 V; TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C TVJ = 125°C ≤ ≤ ≤ ≤ ≤ 1.0 1.2 65 80 50 V V mA mA mA TVJ = TVJM; TVJ = TVJM; VD = 2/3 VDRM VD = 2/3 VDRM ≤ ≤ 0.2 5 V mA VGT VD = 6 V; IGT VGD IGD IL IG = 0.3 A; tG = 30 μs; diG/dt = 0.3 A/μs; ≤ ≤ ≤ 150 200 100 mA mA mA IH TVJ = 25°C; VD = 6 V; RGK = ∞ ≤ 100 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.3 A; diG/dt = 0.3 A/μs ≤ 2 μs tq Qr TVJ = 125°C, IT = 15 A, tP = 300 μs, VR = 100 V di/dt = -10 A/μs, dv/dt = 20 V/μs, VD = 2/3 VDRM typ. 150 75 μs μC RthJC per thyristor (diode); DC current per module per thyristor (diode); DC current per module 1.2 0.3 1.55 0.39 K/W K/W K/W K/W RthJH TVJ = 25°C TVJ = -40°C TVJ = 125°C 10 1: IGT, TVJ = 125°C 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C V VG 1 1 2 3 6 4 0.1 4: PGAV = 0.5 W 5: PGM = 1 W 6: PGM = 10 W IGD, TVJ = 125°C 1 10 5 100 1000 IG mA Fig. 1 Gate trigger range 1000 TVJ = 25°C μs tgd 100 typ. Limit 10 Field Diodes Symbol Conditions IFAV IFAVM IFRMS TH = 85°C, per Diode per diode per diode IFSM TVJ = 45°C; VR = 0 V I2t Maximum Ratings 4 4 6 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 100 110 A A TVJ = TVJM VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 85 94 A A TVJ = 45°C VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 50 50 A2 s A2s TVJ = TVJM VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 36 37 A2s A2s 1 0.15 mA mA 1.83 V IR VR = VRRM VF IF = 21 A; TVJ = 25°C VT0 rT For power-loss calculations only (TVJ = 125°C) 0.9 50 V mΩ RthJC RthJH per diode; DC current per diode; DC current 4.4 5.2 K/W K/W TVJ = TVJM TVJ = 25°C 1 10 100 mA 1000 IG Fig. 2 Gate controlled delay time tgd Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. for resistive load IXYS reserves the right to change limits, test conditions and dimensions. © 2010 IXYS All rights reserved 20100705a 2-3 VHFD 37 70 300 A A 60 A2s 250 IFSM typ. IF 50 103 50Hz, 80% VRRM VR = 0 V 2 It TVJ = 45°C TVJ = 45°C 200 max. TVJ = 125°C TVJ = 25°C 40 TVJ = 125°C 102 150 30 100 20 TVJ = 125°C 50 10 0 0.0 0.5 1.0 1.5 101 0 0.001 V 2.0 0.01 0.1 VF 1 s 1 2 3 t Fig. 3 Forward current vs. voltage drop per diode 4 5 6 7 ms 8 910 t Fig. 5 I2t versus time per diode Fig. 4 Surge overload current 50 120 W A RthHA : 100 0.5 1.0 1.5 2.0 3.0 4.0 6.0 Ptot 80 60 40 Id(AV)M K/W K/W K/W K/W K/W K/W K/W 30 20 40 10 20 0 0 0 10 20 30 40 A 0 20 40 60 IF(AV)M 80 100 120 °C 140 0 20 40 60 Tamb Fig. 6 Power dissipation vs. direct output current and ambient temperature 80 100 120 °C TH Fig. 7 Max. forward current vs. heatsink temperature 2.0 K/W 1.5 ZthJH 1.0 Constants for ZthJH calculation: i 1 2 3 4 0.5 0.0 0.001 0.01 0.1 Fig. 8 Transient thermal impedance junction to heatsink IXYS reserves the right to change limits, test conditions and dimensions. © 2010 IXYS All rights reserved s 1 Rthi (K/W) ti (s) 0.005 0.2 0.875 0.47 0.008 0.05 0.06 0.25 10 t 20100705a 3-3