VID100-06P1

VDI 100-06P1 VII 100-06P1 VID 100-06P1 VIO 100-06P1 IGBT Modules in ECO-PAC 2 Short Circuit SOA Capability Square RBSOA Preliminary data sheet VIO IJK IC25 = 93 A = 600 V VCES VCE(sat) typ. = 2.4 V VII OP9 VID IK10 VDI AC1 L9 X13 X15 SV18 L9 NTC T16 PS18 A S LMN E2 GH10 NTC L9 X15 F1 X15 NTC X16 AC1 X16 B3 Pin arangement see outlines K10 VX18 X16 IK10 IGBTs Symbol VCES VGES IC25 IC80 ICM VCEK tSC (SCSOA) Ptot Symbol TC = 25°C TC = 80°C VGE = ±15 V; RG = 15 Ω; TVJ = 125°C RBSOA, Clamped inductive load; L = 100 µH VCE = VCES; VGE = ±15 V; RG = 15 Ω; TVJ = 125°C non-repetitive TC = 25°C Conditions Conditions TVJ = 25°C to 150°C Maximum Ratings 600 ± 20 93 63 150 VCES 10 294 V V A A A µs W Features • NPT IGBT's - positive temperature coefficient of saturation voltage - fast switching • FRED diodes - fast reverse recovery - low forward voltage • Industry Standard Package - solderable pins for PCB mounting - isolated DCB ceramic base plate Advantages • space and weight savings • reduced protection circuits • leads with expansion bend for stress relief Typical Applications • AC and DC motor control • AC servo and robot drives • power supplies • welding inverters Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. 2.4 2.8 4.5 2.8 6.5 1.4 6.5 150 150 60 450 40 3.2 2.2 4.2 0.85 V V V mA mA nA ns ns ns ns mJ mJ nF 0.43 K/W K/W VCE(sat) VGE(th) ICES IGES td(on) tr td(off) tf Eon Eoff Cies RthJC RthJH IC = 100 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C IC = 1.5 mA; VGE = VCE VCE = VCES; VGE = 0 V; TVJ = 25°C TVJ = 125°C VCE = 0 V; VGE = ± 20 V Inductive load, TVJ = 125°C VCE = 300 V; IC = 60 A VGE = 15/0 V; RG = 15 Ω VCE = 25 V; VGE = 0 V; f = 1 MHz (per IGBT) with heatsink compound (0.42 K/m.K; 50 µm) IXYS reserves the right to change limits, test conditions and dimensions. © 2003 IXYS All rights reserved 1-2 303 VDI 100-06P1 VII 100-06P1 VID 100-06P1 VIO 100-06P1 Reverse diodes (FRED) Symbol IF25 IF80 Symbol VF IRM trr RthJC RthJH Conditions TC = 25°C TC = 80°C Conditions IF = 60 A; TVJ = 25°C TVJ = 125°C IF = 60 A; diF/dt = 500 A/µs; TVJ = 125°C VR = 300 V; VGE = 0 V with heatsink compound (0.42 K/m.K; 50 µm) VII Maximum Ratings 134 82 A A Characteristic Values min. typ. max. 1.78 1.33 28 100 1.32 1.99 V V A ns 0.66 K/W K/W B3 Temperature Sensor NTC Symbol R25 B25/50 Module Symbol TVJ Tstg VISOL Md a Symbol dS dA Weight VDI IISOL ≤ 1 mA; 50/60 Hz mounting torque (M4) Max. allowable acceleration Conditions Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) Conditions Maximum Ratings -40...+150 -40...+150 3000 1.5 - 2.0 14 - 18 50 °C °C V~ Nm lb.in. m/s2 Conditions T = 25°C Characteristic Values min. typ. max. 4.75 5.0 3375 5.25 kΩ K VIO Characteristic Values min. typ. max. 11.2 11.2 24 mm mm g VID IXYS reserves the right to change limits, test conditions and dimensions. © 2003 IXYS All rights reserved 2-2 303 Data according to IEC 60747 and refer to a single transistor or diode unless otherwise stated.