CPC1962G

CPC1962 AC Power Switch Parameter Blocking Voltage Ratings 600 Description Units VP Load Current 300 mArms On State Voltage Drop 2.5 Vrms (at IL = 300 mArms) Operating Voltage 240 Vrms The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between the control and load circuits. As a result the CPC1962 is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays. A Load Current up to 300 mArms 600VP Blocking Voltage 5mA Sensitivity Zero-Crossing Detection DC Control, AC Output Optically Isolated TTL and CMOS Compatible Low EMI and RFI Generation High Noise Immunity Machine Insertable, Wave Solderable IN • • • • • • • • • • RY Features The CPC1962 is an AC Solid State Switch using optical coupling with dual integrated SCR outputs to produce an ideal isolated triac driver. The CPC1962 switches are robust enough to provide a blocking voltage of up to 600VP. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. Approvals Applications EL Triac Driver Programmable Control Process Control Power Control Panels Remote Switching Gas Pump Electronics Contactors Large Relays Solenoids Motors Heaters PR • • • • • • • • • • • IM • UL recognized file #: E69938 RoHS 2002/95/EC DS-CPC1962-R0B Ordering Information Part # CPC1962G Description 6-Pin DIP (50/Tube) CPC1962GS 6-Pin Surface Mount (50/Tube) CPC1962GSTR 6-Pin Surface Mount (1000/Reel) Pin Configuration + LED – LED 1 2 3 6 ZC 5 4 AC Load N/C AC Load e3 www.clare.com 1 CPC1962 Absolute Maximum Ratings Ratings 600 Units VP Reverse Input Voltage 5 V Input Control Current 50 mA Peak (10ms) Input Power Dissipation 1 1 A 150 mW Total Package Dissipation 2 800 mW Isolation Voltage Input to Output 3750 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 Derate Linearly 1.33 mW/˚C 2 Derate Linearly 6.67 mW/˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. RY Parameter Blocking Voltage Electrical Characteristics Conditions VON - - 2.5 Vrms - dv/dt 500 - - V/µs IF=5mA IH - 200 - µA IF=5mA TON - - 0.5 cycles IF=5mA TOFF - - 0.5 cycles 1st half cycle - - 5 20 V - - - - 1 V - - 20 - 500 Hz 60Hz PF 0.25 - - - 240 Vrms - IL 5 - 300 mArms VL = 600V ILEAK - - 1 µA Turn-off EL Holding Current Zero-Cross Turn-On Voltage Sub. half cycle Operating Frequency 1 PR Load Power Factor for Guaranteed Turn-On 2 Input Characteristics @ 25°C Input Control Current 3 Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance 1 2 3 2 Units 5 IM Critical Rate of Rise Max VL Load Current, Continuous On-State Voltage Drop Typ IL = 300mArms - Off State Leakage Current Min - Operating Voltage Switching Speeds Turn-on Symbol IN Parameters Output Characteristics @ 25°C A Electrical absolute maximum ratings are at 25°C - IF 5 - - mA IF=5mA VF 0.9 1.2 1.4 V 0.8 - - V VR=5V IR - - 10 µA - CI/O - 3 - pF Zero Cross 1st half cycle @