CPC1964B
AC Power Switch
INTEGRATED CIRCUITS DIVISION
Parameter
AC Operating Voltage
Load Current
On-State Voltage Drop
Blocking Voltage
Rating
20 - 280
1.5
1.4
800
Units
Vrms
Arms
VP (at IL = 1.5AP)
VP
Features
•
•
•
•
•
•
•
•
•
•
•
•
Load Current up to 1.5Arms
800VP Blocking Voltage
5mA Sensitivity
5000Vrms Input to Output Isolation
Off-State dV/dt: 1000V/s Minimum
12.5mm External Creepage Distance with
Appropriate Layout
Zero-Cross Switching
DC Control, AC Output
Optically Isolated
Low EMI and RFI Generation
High Noise Immunity
Flammability Rating UL 94 V-0
Description
CPC1964B is an AC Solid State Switch utilizing
dual power SCR outputs. This device also includes
zero-cross turn-on circuitry and is specified with a
blocking voltage of 800VP .
In addition, the tightly controlled zero-cross circuitry
ensures low noise switching of AC loads by minimizing
the generation of transients. The optically coupled
input and output circuits provide 5000Vrms of isolation
between the control and load circuits. As a result, the
CPC1964B is well suited for industrial environments
where electromagnetic interference would disrupt the
operation of plant facility communication and control
systems.
Approvals
• UL 508 Certified Component: File E69938
• CSA Industrial Control Switches Approval: Pending
Ordering Information
Applications
•
•
•
•
•
•
•
•
•
•
•
Programmable Control
Process Control
Power Control Panels
Remote Switching
Gas Pump Electronics
Contactors
Large Relays
Solenoids
Motors
Heaters
Meters
Part #
CPC1964B
Description
8-Pin Power SOIC (25/Tube)
Pin Configuration
8
AC Load
7
AC Load
5
ZC
1
N/C
DS-CPC1964B-R04
6
www.ixysic.com
2
+ LED
3
– LED
4
N/C
1
INTEGRATED CIRCUITS DIVISION
CPC1964B
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage (VDRM)
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage Input to Output
ESD, Human Body Model
i2t for Fusing (1/2 Sine Wave, 50Hz)
Operational Temperature
Storage Temperature
1
Derate linearly 1.33 mW / ºC
2
Derate linearly 20 mW / ºC
Ratings
800
5
50
1
150
2400
5000
4
1.6
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
kV
A2s
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Typical values are characteristic of the device at +25°C,
and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the
manufacturing testing requirements.
Electrical Characteristics @ 25ºC
Parameters
Output Characteristics
Load Current, Continuous
Maximum Surge Current
Off State Leakage Current
On-State Voltage Drop 1
Off-State dV/dt
Switching Speeds
Turn-on
Turn-off
Zero-Cross Turn-On Voltage 2
Holding Current
Latching Current
Operating Frequency
Load Power Factor for
Guaranteed Turn-On 3
Input Characteristics
Input Control Current to Activate 4
Input Drop-out Voltage to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Input to Output Capacitance
Conditions
Symbol
Min
Typ
Max
Units
VL=120-280Vrms
t < 20ms
IF=0mA, VL=VDRM
IF=5mA, IL=1.5AP
IF=0mA
IL
IP
0.1
1000
1.21
-
1.5
16
100
1.4
-
Arms
AP
AP
VP
V/s
ton
toff
IH
IL
20
5
-
0.5
0.5
20
5
75
75
500
cycles
cycles
V
V
mA
mA
Hz
f=60Hz
PF
0.25
-
-
-
f=60Hz, IL=1A Resistive
IF=5mA
VR=5V
IF
VF
IR
0.8
0.9
-
1.2
-
5
1.5
10
mA
V
V
A
VIO=0V, f=1MHz
CIO
-
-
3
pF
IF = 5 mA
1st half cycle
Subsequent half cycle
-
ILEAK
dV/dt
1
Tested at a peak value equivalent.
2 Zero Cross 1st half cycle @ 10mA.
F
2
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1964B
PERFORMANCE DATA*
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
35
35
20
15
10
5
Device Count (N)
Device Count (N)
25
25
20
15
10
5
1.25
1.26
1.27
1.28
1.29
LED Forward Voltage (V)
30
1.30
Typical IF for Switch Operation
Resistive Load
(N=50, IL=1.5A, VL=120VAC, 60Hz)
15
10
8.0
25
20
15
10
1.4
1.3
1.2
1.8
850
865
880
895
910
Blocking Voltage (VP)
2.8
2.7
2.6
2.5
2.4
2.3
2.2
80
100
-40
Typical IF for Switch Operation
vs. Load Frequency (Resistive)
(IL=4.91Arms, VP=67V, RL=10:)
-20
0
20
40
60
Temperature (ºC)
80
8.0
7.5
7.0
500
2.55
2.50
-40
-20
0
20
40
60
Temperature (ºC)
80
100
80
100
Holding Current
(RL=1.9:)
70
60
50
40
30
20
6.5
200
300
400
Load Frequency (Hz)
2.60
80
2.2
2.0
2.65
Holding Current (mA)
Zero-Cross (V)
2.4
2.70
100
3.0
2.6
2.75
First Zero-Cross Turn-On Voltage
(IF=5mA, RL=120:)
8.5
2.8
2.80
2.45
2.1
20
40
60
Temperature (ºC)
925
Typical IF for Switch Operation
Inductive Load
(IL=500mA, 60Hz, 200mH)
2.85
LED Forward Current (mA)
1.5
1.1
LED Forward Current (mA)
5.5 6.0 6.5 7.0 7.5
Zero-Cross Voltage (V)
35
Typical IF for Switch Operation
Resistive Load
(IL=350mA, 60Hz)
2.9
IF=50mA
IF=20mA
IF=10mA
IF=5mA
LED Forward Current (mA)
LED Forward Voltage (V)
1.6
100
5.0
0
0.8
1.0
1.2
1.4
1.6
LED Forward Current (mA)
Typical LED Forward Voltage Drop
vs. Temperature
0
4.5
5
0.6
3.2
5
Typical Blocking Voltage Distribution
(N=50)
Device Count (N)
Device Count (N)
20
0
0
10
30
5
-20
15
1.200 1.205 1.210 1.215 1.220 1.225 1.230
Forward Voltage (VP)
25
-40
20
0
0
0
First Zero-Cross Turn-On Voltage
Distribution
(N=50, IF=5mA)
25
30
30
Device Count (N)
On-State Forward Voltage Drop
(N=50, IF=5mA, IL=1.5A)
-40
-20
0
20
40
60
Temperature (ºC)
80
100
-40
-20
0
20
40
60
Temperature (ºC)
*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC.
For guaranteed parameters not indicated in the written specifications, please contact our application department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1964B
PERFORMANCE DATA*
Typical Load Current
vs. Load Voltage
(IF=5mA)
On-State Voltage vs. Temperature
1.20
IL=1.5A
1.15
1.10
IL=1A
1.05
1.00
IL=0.5A
0.95
-20
0
20
40
60
Temperature (ºC)
80
100
0.0
0.5
1.0
Leakage Current (PA)
1000
950
900
0
20
40
60
Temperature (ºC)
1.00
0.75
0.50
-40
1.5
-20
80
100
20
40
60
Temperature (ºC)
80
100
20
VL=800V
VL=300V
1
0.1
0.01
0.001
-40
0
Maximum Surge Current vs. Time
10
-20
1.25
Typical Leakage Current
vs. Temperature
1050
Blocking Voltage (VP)
-0.5
1.50
Load Voltage (V)
Typical Blocking Voltage
vs. Temperature
850
-40
-1.0
Load Current (AP)
-40
1.75
@ 85ºC
@ 25ºC
@ -40ºC
Load Current (Arms)
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-1.5
Load Current (A)
On-State Voltage (VP)
1.25
Maximum Load Current
vs. Temperature
(IL=5mA)
-20
0
20
40
60
Temperature (ºC)
80
100
15
10
5
0
100Ps
1ms
10ms 100ms
1s
Time (ms)
10s
100s
*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC.
For guaranteed parameters not indicated in the written specifications, please contact our application department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1964B
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of
the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of
our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices
when handled according to the limitations and information in that standard as well as to any limitations set forth in the
information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled
according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Classification
CPC1964B
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the
body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum
Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other
processes, the guidelines of J-STD-020 must be observed.
Device
Classification Temperature (Tc)
Dwell Time (tp)
Max Reflow Cycles
CPC1964B
245ºC
30 seconds
3
Board Wash
IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux
residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage
to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow
up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the
variability of the wash parameters used to clean the board, determination of the bake temperature and duration
necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning
or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the
device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.
R04
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1964B
Mechanical Dimensions
CPC1964B
21.082 ± 0.381
(0.830 ± 0.015)
Pin 8
16.764 ± 0.381
(0.660 ± 0.015)
3.302 ± 0.051
(0.130 ± 0.002)
0.127 ± 0.076
(0.005 ± 0.003)
15.90
(0.626)
10.160 ± 0.254
(0.400 ± 0.010)
2.00
(0.079)
0.889 ± 0.127
(0.035 ± 0.005)
Pin 1
0.762 ± 0.102
(0.030 ± 0.004)
5.080 ± 0.127
(0.200 ± 0.005)
7.622 ± 0.127
(0.300 ± 0.005)
Recommended PCB Pattern
1.524 typ
(0.060)
1.016 ± 0.127
(0.040 ± 0.005)
1.651 ± 0.102
(0.065 ± 0.004)
5.080 ± 0.127
(0.200 ± 0.005)
0.381 ± 0.025
(0.015 ± 0.001)
Dimensions
Unless Otherwise Noted
mm
(inches)
Note: Pin-to-pin tolerances are non-cumulative.
5.080
(0.200)
7.622
(0.300)
5.080
(0.200)
0.95
(0.037)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes
to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits'
Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but
not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property
or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1964B-R04
©Copyright 2018, IXYS Integrated Circuits
All rights reserved. Printed in USA.
6/20/2018
