DSEI8-06A

DSEI 8-06A DSEI 8-06AS IFAV = 8 A VRRM = 600 V trr = 35 ns Fast Recovery Epitaxial Diode (FRED) VRSM VRRM Type V V 640 600 DSEI 8-06A 640 600 DSEI 8-06AS A C TO-220 AC DSEI 8-06A C  A C TO-263 AB DSEI 8-06AS NC A = Anode, C = Cathode, NC = No Connection, TAB = Cathode Symbol Conditions IFRMS IFAVM • IFRM TVJ = TVJM TC = 115°C; rectangular, d = 0.5 tp < 10 µs; rep. rating, pulse width limited by TVJM 16 8 130 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 100 110 A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 85 95 A TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 50 50 A2 s TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 36 37 A2 s -40...+150 150 -40...+150 °C °C °C 50 W 0.4...0.6 Nm 2 g I2t Maximum Ratings TVJ TVJM Tstg Ptot TC = 25°C Md mounting torque Weight typical Symbol Conditions A  C (TAB) Features • International standard package JEDEC TO-220 AC & TO-283 AB • Planar passivated chips • Very short recovery time • Extremely low switching losses • Low IRM-values • Soft recovery behaviour • Epoxy meets UL 94V-0 Applications • Antiparallel diode for high frequency switching devices • Anti saturation diode • Snubber diode • Free wheeling diode in converters and motor control circuits • Rectifiers in switch mode power supplies (SMPS) • Inductive heating and melting • Uninterruptible power supplies (UPS) • Ultrasonic cleaners and welders Characteristic Values typ. Advantages max. IR VR = VRRM VR = 0.8·VRRM VR = 0.8·VRRM TVJ = 25°C TVJ = 25°C TVJ = 125°C 20 10 1.5 µA µA mA VF IF = 8 A TVJ = 150°C TVJ = 25°C 1.3 1.5 V V VT0 rT For power-loss calculations only TVJ = TVJM 0.98 28.7 V mΩ 2.5 60 K/W K/W K/W RthJC RthCH RthJA 0.5 trr IF = 1 A; -di/dt = 50 A/µs; VR = 30 V; TVJ = 25°C 35 50 ns IRM VR = 350 V; IF = 8 A; -diF/dt = 64 A/µs L < 0.05 µH; TVJ = 100°C 2.5 2.8 A • High reliability circuit operation • Low voltage peaks for reduced protection circuits • Low noise switching • Low losses • Operating at lower temperature or space saving by reduced cooling • IFAVM rating includes reverse blocking losses at TVJM. VR = 0.8·VRRM, duty cycle d = 0.5 Data according to IEC 60747 IXYS reserves the right to change limits, test conditions and dimensions. © 2009 IXYS All rights reserved 20090106a 1-3 DSEI 8-06A DSEI 8-06AS 25 1.0 30 TVJ = 100°C VR = 350 V TVJ = 100°C VR = 350 V 0.8 20 max IF = 8 A 16 A 8A 4A 20 Qr 0.6 IF [A] TVJ = 150°C 100°C 25°C 10 IRM 15 IF = 8 A 16 A 8A 4A [µC] 0.4 max [A] 10 5 0.2 typ. typ. 0 0.0 0 1 0 1 2 10 VF [V] 100 0 1000 -diF /dt [A/µs] Fig. 1 Forward current IF versus VF 0.4 TVJ = 100°C VR = 350 V 1.2 0.3 200 300 400 -diF /dt [A/µs] Fig. 3 Typ. peak reverse current IRM versus -diF /dt Fig. 2 Typ. reverse recov. charge Qr versus -diF /dt 1.4 100 20 1000 16 800 max 1.0 IF = 8 A 16 A 8A 4A trr Kf 0.8 0.2 [µs] IRM 0.6 VFR 12 600 TVJ = 125°C IF = 8A [V] 8 tfr 400 [ns] Qr 0.1 4 0.4 tfr VFR 200 typ. 0.2 0.0 0 40 80 120 0 0 160 TVJ [°C] 100 200 300 400 -diF /dt [A/µs] 100 200 300 -diF /dt [A/µs] Fig. 5 Typ. recovery time Fig. 4 Dyn. parameters Qr, IRM versus TVJ 0 0 Fig. 6 Typ. peak forward voltage VFR and tfr versus diF/dt trr versus -diF /dt 3.0 2.5 2.0 ZthJC 1.5 [k/W] 1.0 0.5 0.0 0.001 0.01 0.1 t [s] 1 10 Fig. 7 Transient thermal impedance junction to case IXYS reserves the right to change limits, test conditions and dimensions. © 2009 IXYS All rights reserved 20090106a 2-3 DSEI 8-06A DSEI 8-06AS Dimensions TO-220 AC A = supplier option H1 ØP D 4 1 L1 3 L 2x b2 Millimeter Min. Max. Inches Min. Max. A A1 A2 4.32 1.14 2.29 4.82 1.39 2.79 0.170 0.045 0.090 0.190 0.055 0.110 b b2 0.64 1.15 1.01 1.65 0.025 0.045 0.040 0.065 C D 0.35 14.73 0.56 16.00 0.014 0.580 0.022 0.630 E e H1 9.91 5.08 5.85 10.66 BSC 6.85 0.390 0.200 0.230 0.420 BSC 0.270 L L1 12.70 2.79 13.97 5.84 0.500 0.110 0.550 0.230 ØP Q 3.54 2.54 4.08 3.18 0.139 0.100 0.161 0.125 A1 Q E Dim. 2x b C e A2 Dimensions TO-263 AB Dim. W Supplier Option D1 L1 c2 A1 H D E A 4 L L2 1 2 3 c 2x e 2x b 3x b2 10.92 (0.430) E1 W Inches min max 0.160 0.190 typ. 0.004 0.095 0.020 0.039 0.045 0.055 0.016 0.029 0.045 0.055 0.330 0.370 0.315 0.350 0.098 0.380 0.410 0.245 0.335 0,100 BSC 0.169 0.575 0.625 0.070 0.110 0.040 0.066 typ. 0.002 0.0008 All dimensions conform with and/or within JEDEC standard. 1.78 (0.07) 3.05 (0.120) 3.81 (0.150) 9.02 (0.355) mm (Inches) A A1 A2 b b2 c c2 D D1 D2 E E1 e e1 H L L1 Millimeter min max 4.06 4.83 typ. 0.10 2.41 0.51 0.99 1.14 1.40 0.40 0.74 1.40 1.14 8.38 9.40 8.00 8.89 2.5 9.65 10.41 6.22 8.50 2,54 BSC 4.28 14.61 15.88 1.78 2.79 1.02 1.68 typ. 0.040 0.02 2.54 (0.100) Recommended min. foot print IXYS reserves the right to change limits, test conditions and dimensions. © 2009 IXYS All rights reserved 20090106a 3-3