DSEK60-02A

Common Cathode Fast Recovery Epitaxial Diode (FRED) VRSM VRRM V V 200 200 200 200 DSEK 60 IFAVM = 2x 34 A VRRM = 200 V = 35 ns trr TO-247 AD Type ISOPLUS 247TM Version A A DSEK 60-02A DSEK 60-02AR C A A C A Version AR C (TAB) A C A TAB A = Anode, C = Cathode Symbol Test Conditions IFRMS IFAVM IFRM TVJ = TVJM TC = 115°C; rectangular, d = 0.5 tP < 10 µs; rep. rating, pulse width limited by TVJM 50 34 375 A A A IFSM TVJ = 45°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 325 350 A A TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 290 310 A A TVJ = 45°C t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 530 510 A 2s A 2s TVJ = 150°C; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 420 400 A 2s A 2s -40...+150 150 -40...+150 °C °C °C 125 W TVJ TVJM Tstg Ptot TC = 25°C Md * Mounting torque with screw M3 Mounting torque with screw M3.5 VISOL ** 50/60 Hz, RMS, t = 1 minute, leads-to-tab 0.45-0.55/4-5 0.45-0.55/4-5 Nm/lb.in. Nm/lb.in. 2500 Weight 6 Test Conditions g Characteristic Values per leg typ. max. IR TVJ = 25°C TVJ = 25°C TVJ = 125°C VR VR VR = VRRM = 0.8 • VRRM = 0.8 • VRRM 200 50µA 5 mA µA VF IF = 30 A; TVJ TVJ = 150°C = 25°C 0.85 1.10 V V VT0 rT mΩ For power-loss calculations only TVJ = TVJM 0.72 4.2 V RthJC RthCH 0.5 1 K/W K/W trr IF = 1 A; -di/dt = 100 A/µs; VR = 30 V; TVJ = 25°C 35 50ns IRM VR = 100 V; IF = 30 A; -diF/dt = 100 A/µs L ≤ 0.05 µH; TVJ = 25°C 4 5A IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 Data according to IEC 60747 refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions © 1999 IXYS All rights reserved International standard package JEDEC TO-247 AD Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behavior Epoxy meets UL 94V-0 flammability classification D1 Version AR isolated and UL registered E153432 Applications Rectifiers in switch mode power supplies (SMPS) Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders V~ * Verson A only; ** Version AR only Symbol Features Advantages High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses Operating at lower temperature or space saving by reduced cooling 839 I 2t Maximum Ratings per leg D1 - 35 DSEK 60, 200V 120 A 0.8 100 IF Qr 30 TVJ= 100°C VR = 100V µC TVJ= 100°C A V = 100V R 25 IRM 0.6 80 IF= 15A IF= 35A IF= 70A 20 60 IF= 15A IF= 35A IF= 70A 0.4 TVJ=150°C TVJ=100°C TVJ= 25°C 40 15 10 0.2 20 5 0 0.0 0.4 0.0 10 1.2 V 0.8 100 VF Fig. 1 Forward current IF versus VF Fig. 2 Qr 1.6 Typ. reverse recovery charge trr 1.2 Fig. 3 200 V µs 1.5 VFR VFR 50 1.8 TVJ= 100°C IF = 35A tfr 5 600 A/µs 800 1000 -diF/dt 400 Typ. peak reverse current IRM versus -diF/dt 6 TVJ= 100°C VR = 100V 60 Kf 0 versus -diF/dt 70 ns 1.4 0 A/µs 1000 -diF/dt tfr 4 1.2 3 0.9 2 0.6 1 0.3 40 1.0 30 0.8 IRM 0.6 0.4 20 10 Qr 0 IF= 15A IF= 35A IF= 70A 40 80 120 °C 160 0 0 200 400 TVJ Fig. 4 Dynamic parameters Qr, IRM versus TVJ Fig. 5 600 A/µs 800 -diF/dt Typ. recovery time trr versus -diF/dt 1.2 K/W Dimensions 1.0 0.8 ZthJC 0.6 0.4 0.2 0.0 0.001 DSEK 60-02 0.01 0.1 1 t s 0 0 Fig. 6 200 400 600 diF/dt 0.0 A/µs 800 Typ. peak forward voltage VFR and tfr versus diF/dt Dim. Millimeter Min. Max. Inches Min. Max. A B 19.81 20.32 20.80 21.46 0.780 0.819 0.800 0.845 C D 15.75 16.26 3.55 3.65 0.610 0.140 0.640 0.144 E F 4.32 5.4 5.49 6.2 0.170 0.212 0.216 0.244 G H 1.65 - 2.13 4.5 0.065 - 0.084 0.177 J K 1.0 10.8 1.4 11.0 0.040 0.426 0.055 0.433 L M 4.7 0.4 5.3 0.8 0.185 0.016 0.209 0.031 N 2.2 2.54 0.087 0.102 10 Transient thermal impedance junction to case 831 Fig. 7 1000 © 1999 IXYS All rights reserved D1 - 36 D1