IXFT40N50Q

Advanced Technical Information IXFH 40N50Q IXFT 40N50Q HiPerFETTM Power MOSFETs Q-Class VDSS = 500 V = 40 A ID25 RDS(on) = 0.14 Ω trr ≤ 250 ns N-Channel Enhancement Mode Avalanche Rated, Low Qg, High dv/dt Symbol Test Conditions Maximum Ratings VDSS TJ = 25°C to 150°C 500 V VDGR TJ = 25°C to 150°C; RGS = 1 MΩ 500 V VGS Continuous ±30 V VGSM Transient ±40 V ID25 TC = 25°C IDM TC = 25°C, pulse width limited by TJM IAR EAR 40 A 160 A TC = 25°C 40 A TC = 25°C 50 mJ 2.5 mJ 20 V/ns 500 W -55 to +150 °C TJM 150 °C Tstg -55 to +150 °C 300 °C EAS dv/dt IS ≤ IDM, di/dt ≤ 100 A/µs, VDD ≤ VDSS, TJ ≤ 150°C, RG = 2 Ω PD TC = 25°C TJ TL 1.6 mm (0.063 in) from case for 10 s Md Mounting torque Weight TO-247 TO-268 Symbol Test Conditions VDSS VGS = 0 V, ID = 250 µA VGS(th) VDS = VGS, ID = 4 mA IGSS VGS = ±30 VDC, VDS = 0 IDSS VDS = VDSS VGS = 0 V RDS(on) 1.13/10 Nm/lb.in. 6 4 g g Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. 500 4.5 V ±100 nA TJ = 25°C TJ = 125°C 25 1 µA mA VGS = 10 V, ID = 0.5 ID25 Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 % 0.14 Ω © 2003 IXYS All rights reserved 2.5 V TO-247 AD (IXFH) (TAB) TO-268 (D3) ( IXFT) G (TAB) S G = Gate D = Drain S = Source TAB = Drain Features z IXYS advanced low Qg process z Low gate charge and capacitances - easier to drive - faster switching z International standard packages z Low RDS (on) z Rated for unclamped Inductive load switching (UIS) rated z Molding epoxies meet UL 94 V-0 flammability classification Advantages z Easy to mount z Space savings z High power density DS99002(01/03) IXFH 40N50Q IXFT 40N50Q Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs VDS = 20 V; ID = 0.5 • ID25, pulse test 22 35 S 3800 pF 660 pF Crss 180 pF td(on) 17 ns 20 ns 56 ns 14 ns 130 nC 26 nC 58 nC Ciss Coss VGS = 0 V, VDS = 25 V, f = 1 MHz tr VGS = 10 V, VDS = 0.5 • VDSS, ID = 0.5 • ID25 td(off) RG = 2.0 Ω (External), tf Qg(on) Qgs VGS = 10 V, VDS = 0.5 • VDSS, ID = 0.5 • ID25 Qgd RthJC RthCK 0.25 (TO-247) Source-Drain Diode 0.25 K/W Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. Symbol Test Conditions IS VGS = 0 V ISM Repetitive; pulse width limited by TJM VSD IF = IS, VGS = 0 V, Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 % trr QRM IRM K/W IF = 25A, -di/dt = 100 A/µs, VR = 100 V 40 A 160 A 1.5 V 250 ns µC A 1.0 10 TO-247 AD (IXFH) Outline 1 2 3 Terminals: 1 - Gate 2 - Drain 3 - Source Tab - Drain Dim. Millimeter Min. Max. Inches Min. Max. A A1 A2 4.7 2.2 2.2 5.3 2.54 2.6 .185 .087 .059 .209 .102 .098 b b1 b2 1.0 1.65 2.87 1.4 2.13 3.12 .040 .065 .113 .055 .084 .123 C D E .4 20.80 15.75 .8 21.46 16.26 .016 .819 .610 .031 .845 .640 e L L1 5.20 19.81 5.72 20.32 4.50 0.205 .780 0.225 .800 .177 ∅P Q 3.55 5.89 3.65 6.40 .140 0.232 .144 0.252 R S 4.32 6.15 5.49 BSC .170 242 .216 BSC TO-268 Outline Terminals: 1 - Gate 3 - Source 2 - Drain Tab - Drain IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETs and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 4,881,106 4,931,844 5,017,508 5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,486,715 5,381,025 6,306,728B1 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.