IXGH20N100

IXGH 20N100 IXGT 20N100 IGBT VCES IC25 VCE(sat) tfi(typ) = 1000 V = 40 A = 3.0 V = 280 ns Preliminary data Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1000 V VCGR TJ = 25°C to 150°C; RGE = 1 MW 1000 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 40 A IC90 TC = 90°C 20 A ICM TC = 25°C, 1 ms 80 A SSOA (RBSOA) VGE = 15 V, TVJ = 125°C, RG = 47 W Clamped inductive load, L = 100 mH PC TC = 25°C ICM = 40 @ 0.8 VCES A 150 W -55 ... +150 °C TJM 150 °C Tstg -55 ... +150 °C TJ Maximum Lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Maximum Tab temperature for soldering SMD devices for 10 s Md Mounting torque (M3) G E (TAB) TO-247 AD (IXGH) G 300 °C 260 °C C G = Gate, E = Emitter, E C (TAB) C = Collector, TAB = Collector Features 1.13/10 Nm/lb.in. Weight TO-268 (IXGT) TO-247 AD TO-268 6 4 g g • International standard packages JEDEC TO-268 surface and JEDEC TO-247 AD • High current handling capability • MOS Gate turn-on - drive simplicity Applications Symbol Test Conditions BVCES VGE(th) IC IC ICES VCE = VCES VGE = 0 V IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. = 1 mA, VGE = 0 V = 250 mA, VCE = VGE 1000 2.5 TJ = 25°C TJ = 125°C = IC90, VGE = 15 V IXYS reserves the right to change limits, test conditions, and dimensions. © 2000 IXYS All rights reserved 2.2 5 V V 250 1 mA mA ±100 nA 3.0 V • • • • • AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switched-mode and resonant-mode power supplies • Capacitor discharge Advantages • High power density • Suitable for surface mounting • Easy to mount with 1 screw, (isolated mounting screw hole) 98620B (7/00) 1-2 IXGH 20N100 IXGT 20N100 Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs IC = IC90; VCE = 10 V, Pulse test, t £ 300 ms, duty cycle £ 2 % IC(ON) VGE = 10V, VCE = 10V 16 S 90 A 1750 pF 100 pF C res 38 pF Qg 73 nC 13 nC 26 nC C ies Coes Qge VCE = 25 V, VGE = 0 V, f = 1 MHz IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc 12 TO-247 AD (IXGH) Outline Dim. Millimeter Min. Max. Inches Min. Max. td(on) Inductive load, TJ = 25°C 30 ns t ri IC = IC90, VGE = 15 V, L = 100 mH, VCE = 0.8 VCES, RG = Roff = 47 W 30 ns A B 19.81 20.32 20.80 21.46 0.780 0.800 0.819 0.845 C D 15.75 16.26 3.55 3.65 0.610 0.640 0.140 0.144 td(off) tfi Eoff td(on) t ri Eon td(off) tfi Eoff Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG Inductive load, TJ = 125°C IC = IC90, VGE = 15 V, L = 100 mH VCE = 0.8 VCES, RG = Roff = 47 W Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG 350 700 ns 280 700 ns 3.5 8.0 mJ E F 4.32 5.49 5.4 6.2 0.170 0.216 0.212 0.244 30 ns G H 1.65 2.13 4.5 0.065 0.084 0.177 30 ns J K 1.0 1.4 10.8 11.0 0.040 0.055 0.426 0.433 0.65 mJ 700 ns 520 ns 6.5 mJ RthJC RthCK L M 4.7 0.4 5.3 0.8 0.185 0.209 0.016 0.031 N 1.5 2.49 0.087 0.102 TO-268AA (D3 PAK) 0.83 K/W (TO-247) 0.25 Min. Recommended Footprint K/W Dim. A A1 A2 b b2 C D E E1 e H L L1 L2 L3 L4 © 2000 IXYS All rights reserved Millimeter Min. Max. 4.9 5.1 2.7 2.9 .02 .25 1.15 1.45 1.9 2.1 .4 .65 13.80 14.00 15.85 16.05 13.3 13.6 5.45 BSC 18.70 19.10 2.40 2.70 1.20 1.40 1.00 1.15 0.25 BSC 3.80 4.10 IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 Inches Min. Max. .193 .201 .106 .114 .001 .010 .045 .057 .75 .83 .016 .026 .543 .551 .624 .632 .524 .535 .215 BSC .736 .752 .094 .106 .047 .055 .039 .045 .010 BSC .150 .161 2-2 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.