IXGH35N120B

Advance Technical Information HiPerFASTTM IGBT IXGH 35N120B IXGT 35N120B Symbol Test Conditions VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MW 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 70 A IC90 TC = 90°C 35 A ICM TC = 25°C, 1 ms 140 A SSOA (RBSOA) VGE = 15 V, TVJ = 125°C, RG = 5 W Clamped inductive load PC Maximum Ratings ICM = 90 @ 0.8 VCES TC = 25°C °C 150 °C Tstg -55 ... +150 °C Mounting torque (M3) 300 °C 260 °C 1.13/10 Nm/lb.in. Weight TO-247 AD TO-268 E C (TAB) TO-247 AD (IXGH) W -55 ... +150 Md G G TJM Maximum Lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Maximum Tab temperature for soldering SMD devices for 10 s TO-268 (IXGT) A 300 TJ VCES = 1200 V = 70 A IC2 VCE(sat) = 3.3 V tfi(typ) = 160 ns 6 4 g g G = Gate, E = Emitter, C (TAB) C E C = Collector, TAB = Collector Features • International standard packages JEDEC TO-268 and JEDEC TO-247 AD • Low switching losses, low V(sat) • MOS Gate turn-on - drive simplicity Applications Symbol Test Conditions BVCES VGE(th) IC IC ICES VCE = VCES VGE = 0 V Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. = 1 mA, VGE = 0 V = 750 mA, VCE = VGE IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC 1200 2.5 TJ = 25°C TJ = 125°C = IC90, VGE = 15 V TJ = 125°C IXYS reserves the right to change limits, test conditions, and dimensions. © 2000 IXYS All rights reserved 2.7 5 V V 250 5 mA mA ±100 nA 3.3 V V • • • • • AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switched-mode and resonant-mode power supplies Advantages • High power density • Suitable for surface mounting • Easy to mount with 1 screw, (isolated mounting screw hole) 98665 (11/99) 1-2 IXGH 35N120B IXGT 35N120B Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs IC = IC90; VCE = 10 V, Pulse test, t £ 300 ms, duty cycle £ 2 % Cies Coes VCE = 25 V, VGE = 0 V, f = 1 MHz Cres Qg Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) Inductive load, TJ = 25°C t ri IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 W td(off) tfi Eoff td(on) t ri Eon td(off) tfi Eoff 30 40 S 4620 pF 260 pF 90 pF 170 nC 28 nC 57 nC 50 ns 27 Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG Inductive load, TJ = 125°C IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 W Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG Dim. Millimeter Min. Max. Inches Min. Max. A B 19.81 20.32 20.80 21.46 0.780 0.800 0.819 0.845 C D 15.75 16.26 3.55 3.65 0.610 0.640 0.140 0.144 mJ E F 4.32 5.49 5.4 6.2 0.170 0.216 0.212 0.244 55 ns G H 1.65 2.13 4.5 0.065 0.084 0.177 31 ns 2.6 mJ J K 1.0 1.4 10.8 11.0 0.040 0.055 0.426 0.433 300 ns L M 4.7 0.4 5.3 0.8 0.185 0.209 0.016 0.031 360 ns N 1.5 2.49 0.087 0.102 8.0 mJ 180 280 ns 160 320 ns 3.8 7.3 TO-268AA (D3 PAK) 0.42 K/W RthJC RthCK ns TO-247 AD (IXGH) Outline (TO-247) (TO-268) 0.25 0.3 K/W K/W Min. Recommended Footprint Dim. A A1 A2 b b2 C D E E1 e H L L1 L2 L3 L4 © 2000 IXYS All rights reserved Millimeter Min. Max. 4.9 5.1 2.7 2.9 .02 .25 1.15 1.45 1.9 2.1 .4 .65 13.80 14.00 15.85 16.05 13.3 13.6 5.45 BSC 18.70 19.10 2.40 2.70 1.20 1.40 1.00 1.15 0.25 BSC 3.80 4.10 IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 Inches Min. Max. .193 .201 .106 .114 .001 .010 .045 .057 .75 .83 .016 .026 .543 .551 .624 .632 .524 .535 .215 BSC .736 .752 .094 .106 .047 .055 .039 .045 .010 BSC .150 .161 2-2 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.