IXGP12N100A

VCES IGBT IXGA/IXGP12N100 1000 V IXGA/IXGP12N100A 1000 V IC25 VCE(sat) 24 A 24 A 3.5 V 4.0 V Preliminary Data Sheet Symbol Test Conditions TO-220AB (IXGP) Maximum Ratings VCES TJ = 25°C to 150°C 1000 V VCGR TJ = 25°C to 150°C; RGE = 1 MW 1000 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 24 A IC90 TC = 90°C 12 A ICM TC = 25°C, 1 ms 48 A SSOA VGE = 15 V, TVJ = 125°C, RG = 150 W ICM = 24 A (RBSOA) Clamped inductive load, L = 300 mH PC TC = 25°C G C E TO-263 (IXGA) G E @ 0.8 VCES 100 W C (TAB) -55 ... +150 °C Features TJM 150 °C Tstg -55 ... +150 °C • International standard packages JEDEC TO-220AB and TO-263AA TJ Md Mounting torque with screw M3 Mounting torque with screw M3.5 0.45/4 Nm/lb.in. 0.55/5 Nm/lb.in. Weight Maximum lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s 4 g 300 °C • Second generation HDMOSTM process • Low VCE(sat) - for minimum on-state conduction losses • MOS Gate turn-on - drive simplicity Symbol Test Conditions (TJ = 25°C, unless otherwise specified) Min. BVCES IC = 3 mA, VGE = 0 V 1000 VGE(th) IC = 250 mA, VGE = VGE ICES VCE = 0.8, VCES VGE = 0 V IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC = ICE90, VGE = 15 Characteristic Values Typ. Max. 2.5 V TJ = 25°C 250 mA TJ = 125°C 1 mA ±100 nA 3.5 4.0 V V 12N100 12N100A IXYS reserves the right to change limits, test conditions, and dimensions. © 2000 IXYS All rights reserved V 5.0 Applications • AC motor speed control • DC servo and robot drives • DC choppers • Uninterruptible power supplies (UPS) • Switch-mode and resonant-mode power supplies Advantages • Easy to mount with one screw • Reduces assembly time and cost • High power density 95591A (3/97) 1-2 IXGA12N100 IXGA12N100A Symbol Test Conditions (TJ = 25°C, unless otherwise specified) gfs Characteristic Values Min. Typ. Max. IC = IC90; VCE = 10 V, 6 10 IXGP12N100 IXGP12N100A TO-220 AB (IXGP) Outline S Pulse test, t £ 300 ms, duty cycle £ 2 % Qg Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) Inductive load, TJ = 25°C t ri IC td(off) VCE = 800 V, RG = Roff = 120 W Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG tfi Eoff = IC90, VGE = 15 V, L = 300 mH Inductive load, TJ = 125°C Eon IC td(off) tfi Eoff nC 8 20 nC 24 45 nC 100 ns 200 ns 850 1000 ns 500 700 ns 12N100 800 1000 ns 12N100A 2.5 4 mJ = IC90, VGE = 15 V, L = 300 mH VCE = 800 V, RG = Roff = 120 W Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG 90 12N100A td(on) t ri 65 12N100A 12N100 100 ns 200 ns 1.1 mJ 900 ns 950 ns 1250 ns 12N100A 4 mJ 12N100 6 mJ RthJC RthCK 1.25 0.25 Min. Recommended Footprint © 2000 IXYS All rights reserved Dim. A B C D E F G H J K M N Q R Millimeter Min. Max. 12.70 13.97 14.73 16.00 9.91 10.66 3.54 4.08 5.85 6.85 2.54 3.18 1.15 1.65 2.79 5.84 0.64 1.01 2.54 BSC 4.32 4.82 1.14 1.39 0.35 0.56 2.29 2.79 Inches Min. Max. 0.500 0.550 0.580 0.630 0.390 0.420 0.139 0.161 0.230 0.270 0.100 0.125 0.045 0.065 0.110 0.230 0.025 0.040 0.100 BSC 0.170 0.190 0.045 0.055 0.014 0.022 0.090 0.110 K/W K/W TO-263 AA (IXGA) Outline Dim. Millimeter Min. Max. Inches Min. Max. A A1 4.06 2.03 4.83 2.79 .160 .080 .190 .110 b b2 0.51 1.14 0.99 1.40 .020 .045 .039 .055 c c2 0.46 1.14 0.74 1.40 .018 .045 .029 .055 D D1 8.64 7.11 9.65 8.13 .340 .280 .380 .320 E E1 e 9.65 6.86 2.54 10.29 8.13 BSC .380 .270 .100 .405 .320 BSC L L1 L2 L3 L4 14.61 2.29 1.02 1.27 0 15.88 2.79 1.40 1.78 0.38 .575 .090 .040 .050 0 .625 .110 .055 .070 .015 R 0.46 0.74 .018 .029 IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 2-2 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.