IXGP20N120

IGBT IXGA 20N120 VCES IXGP 20N120 IC25 VCE(sat) tfi(typ) Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MΩ 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 40 A IC90 TC = 90°C 20 A ICM TC = 25°C, 1 ms 80 A ICM = 40 A SSOA VGE = 15 V, TVJ = 125°C, RG = 47 Ω (RBSOA) Clamped inductive load PC TC = 25°C W -55 ... +150 °C 150 °C -55 ... +150 °C 300 °C Maximum lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Maximum tab temperature for soldering °C 260 Md Mounting torque with screw M3 Mounting torque with screw M3.5 Weight TO-220 TO-263 0.45/4 Nm/lb.in. 0.55/5 Nm/lb.in. 4 2 g g Symbol Test Conditions (TJ = 25°C, unless otherwise specified) Characteristic Values Min. Typ. Max. BVCES IC = 1 mA, VGE = 0 V 1200 VGE(th) IC = 250 µA, VCE = VGE ICES VCE = VCES VGE = 0 V IC = IC90, VGE = 15 V © 2002 IXYS All rights reserved TO-263 AA (IXGA) V 2.5 5.0 V TJ = 25°C 250 µA TJ = 125°C 1 mA ±100 nA 2.5 V 2.0 C (TAB) E 150 Tstg VCE(sat) G C E G TJM VCE = 0 V, VGE = ±20 V TO-220AB (IXGP) @ 0.8 VCES TJ IGES = 1200 V = 40 A = 2.5 V = 380 ns Features • International standard packages JEDEC TO-220AB and TO-263AA • High current handling capability • MOS Gate turn-on - drive simplicity Applications • • • • • • AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switch-mode and resonant-mode power supplies Capacitor discharge Advantages • • • Easy to mount with one screw Reduces assembly time and cost High power density 98752A (06/02) IXGA 20N120 IXGP 20N120 TO-220 AB Dimensions Symbol Test Conditions (TJ = 25°C, unless otherwise specified) gfs Characteristic Values Min. Typ. Max. IC = IC90; VCE = 10 V, 12 16 S Pulse test, t ≤ 300 µs, duty cycle ≤ 2 % Cies Coes 1750 pF 90 pF 31 pF 90 A 63 nC 13 nC 26 nC 28 ns VCE = 25 V, VGE = 0 V, f = 1 MHz Cres IC(ON) VGE = 10V, VCE = 10V Qg Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) Inductive load, TJ = 25°°C tri IC td(off) tfi Eoff td(on) tri Eon td(off) tfi Eoff = IC90, VGE = 15 V 20 VCE = 800 V, RG = Roff = 47 Ω Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG IC = IC90, VGE = 15 V VCE = 800 V, RG = Roff = 47 Ω Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG 800 ns 380 700 ns 6.5 10.5 mJ 30 ns 27 ns 0.90 mJ 700 ns 550 ns 9.5 mJ RthJC RthCK 0.83 TO-220 2 - Collector 4 - Collector Bottom Side ns 400 Inductive load, TJ = 125°°C Pins: 1 - Gate 3 - Emitter 0.5 K/W TO-263 AA Outline K/W 1. 2. 3. 4. Min. Recommended Footprint (Dimensions in inches and mm) Gate Collector Emitter Collector Bottom Side Dim. Millimeter Min. Max. Inches Min. Max. A A1 4.06 2.03 4.83 2.79 .160 .080 .190 .110 b b2 0.51 1.14 0.99 1.40 .020 .045 .039 .055 c c2 0.46 1.14 0.74 1.40 .018 .045 .029 .055 D D1 8.64 7.11 9.65 8.13 .340 .280 .380 .320 E E1 e 9.65 6.86 2.54 10.29 8.13 BSC .380 .270 .100 .405 .320 BSC L L1 L2 L3 L4 14.61 2.29 1.02 1.27 0 15.88 2.79 1.40 1.78 0.38 .575 .090 .040 .050 0 .625 .110 .055 .070 .015 R 0.46 0.74 .018 .029 IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETs and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 4,881,106 4,931,844 5,017,508 5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,486,715 5,381,025 6,306,728B1 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.