IXGX35N120B

Preliminary Data Sheet HiPerFASTTM IGBT IXGK 35N120B IXGX 35N120B IXGK 35N120BD1 IXGX 35N120BD1 VCES = 1200 V IC25 = 70 A VCE(sat) = 3.3 V tfi(typ) = 160 ns (D1) Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MΩ 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 70 A IC90 TC = 90°C ICM TC = 25°C, 1 ms SSOA (RBSOA) VGE = 15 V, TVJ = 125°C, RG = 5 Ω Clamped inductive load PC TC = 25°C 35 A 140 A ICM = 90 @ 0.8 VCES A 350 W -55 ... +150 °C TJM 150 °C Tstg -55 ... +150 °C 300 °C TJ Maximum Lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s TO-264 AA (IXGK) G C C (TAB) E PLUS 247TM (IXGX) G C (TAB) C E G = Gate, E = Emitter, C = Collector, TAB = Collector Features Md Mounting torque (M3) (IXGK) Weight 1.13/10Nm/lb.in. TO-264 AA PLUS247TM 10 6 g g ● International standard packages JEDEC TO-264 and PLUS247TM ● Low switching losses, low V(sat) ● MOS Gate turn-on - drive simplicity Applications Symbol Test Conditions BVCES VGE(th) IC IC ICES VCE = VCES VGE = 0 V IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. = 1 mA, VGE = 0 V = 750 µA, VCE = VGE 1200 2.5 TJ = 25°C TJ = 125°C = IC90, VGE = 15 V TJ = 125°C 2.7 5 V V 250 5 µA mA ±100 nA 3.3 V V ● AC motor speed control DC servo and robot drives ● DC choppers ● Uninterruptible power supplies (UPS) ● Switched-mode and resonant-mode power supplies ● Advantages ● ● ● © 2002 IXYS All rights reserved High power density Easy to mount with 1 screw, (isolated mounting screw hole) Spring clip or clamp assembly possible. DS98960 (10/02) IXGK 35N120B IXGX 35N120B Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs IC = IC90; VCE = 10 V, Pulse test, t ≤ 300 µs, duty cycle ≤ 2 % 30 Cies Coes VCE = 25 V, VGE = 0 V, f = 1 MHz 40 S 4620 pF 260 pF 90 pF Cres Qg Qge 170 nC 28 nC 57 nC 50 ns IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) Inductive load, TJ = 25°°C tri IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 Ω td(off) tfi Eoff td(on) tri Eon td(off) tfi Eoff 27 Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG 280 ns 160 320 ns 3.8 7.3 mJ 55 ns 31 ns 2.6 mJ 300 ns 360 ns 8.0 mJ Inductive load, TJ = 125°°C IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 Ω Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG ns 180 IXGK IXGX 35N120BD1 35N120BD1 TO-264 AA Outline (IXGK) Dim. Millimeter Min. Max. A A1 A2 b b1 b2 c D E e J K L L1 P Q Q1 R R1 S T 4.82 5.13 2.54 2.89 2.00 2.10 1.12 1.42 2.39 2.69 2.90 3.09 0.53 0.83 25.91 26.16 19.81 19.96 5.46 BSC 0.00 0.25 0.00 0.25 20.32 20.83 2.29 2.59 3.17 3.66 6.07 6.27 8.38 8.69 3.81 4.32 1.78 2.29 6.04 6.30 1.57 1.83 Min. Inches Max. .190 .202 .100 .114 .079 .083 .044 .056 .094 .106 .114 .122 .021 .033 1.020 1.030 .780 .786 .215 BSC .000 .010 .000 .010 .800 .820 .090 .102 .125 .144 .239 .247 .330 .342 .150 .170 .070 .090 .238 .248 .062 .072 PLUS247TM Outline (IXGX) 0.35 K/W RthJC RthCK 0.15 Reverse Diode (FRED) K/W Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. Symbol Test Conditions VF IF = IC90, VGE = 0 V, Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 %, TJ = 125°C IRM t rr IF = IC90, VGE = 0 V, -diF/dt = 480 A/µs VR = 540 V TJ =100°C IF = 1 A; -di/dt = 200 A/µs; VR = 30 V TJ = 25°C 2.35 V 36 A ns ns Terminals: 32 225 40 60 0.65 K/W RthJC IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 4,881,106 4,931,844 5,017,508 5,034,796 Dim. A A1 A2 b b1 b2 C D E e L L1 Q R 5,049,961 5,063,307 1 - Gate 2 - Drain (Collector) 3 - Source (Emitter) 4 - Drain (Collector) Millimeter Min. Max. 4.83 5.21 2.29 2.54 1.91 2.16 1.14 1.40 1.91 2.13 2.92 3.12 0.61 0.80 20.80 21.34 15.75 16.13 5.45 BSC 19.81 20.32 3.81 4.32 5.59 6.20 4.32 4.83 5,187,117 5,237,481 Inches Min. Max. .190 .205 .090 .100 .075 .085 .045 .055 .075 .084 .115 .123 .024 .031 .819 .840 .620 .635 .215 BSC .780 .800 .150 .170 .220 0.244 .170 .190 5,486,715 5,381,025 6,306,728B1 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.