LSIC2SD120N80PA

LSIC2SD120N80PA Silicon Carbide Schottky Diode Datasheet LSIC2SD120N80PA 1200 V, 2x40 A SiC Schottky Barrier Diode Product Summary Characteristic Value VRRM Unit 1200 V 25 °C) 2x40 A QC (VR: 0-800 V) 240* nC IF (TC *per leg Features • Positive temperature coefficient for safe operation and ease of paralleling • 175 °C maximum operating junction temperature • Excellent surge capability • Extremely fast, temperature-independent switching behavior • Dramatically reduced switching losses compared to Si bipolar diodes • Zero reverse recovery current • Copper base plate with AlN isolation for low thermal resistance • Isolation voltage: 3000 V • UL Recognition Pending under File E72873 *Backside is isolated Agency Approvals and Environmental Environmental Approvals (pending) Pinout Diagram Applications • Boost diodes in PFC or DC/DC stages • Switch-mode power supplies • Solar inverters • Uninterruptable power supplies • Industrial motor drives • Battery Chargers • High speed rectifier *Backside is isolated 1 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Revised: 8/24/2020 LSIC2SD120N80PA Silicon Carbide Schottky Diode Datasheet 1. Maximum Ratings ...........................................................................................................................................3 2. Package Specifications ...................................................................................................................................3 3. Thermal Characteristics ..................................................................................................................................3 4. Electrical Characteristics .................................................................................................................................3 5. Performance Curves .......................................................................................................................................4 6. VF Model for Simulation ..................................................................................................................................5 7. Package Dimensions ......................................................................................................................................6 8. Part Numbering and Marking ..........................................................................................................................6 9. Packing Options ..............................................................................................................................................6 10. Packing Specifications ..................................................................................................................................7 2 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Revised: 8/24/2020 LSIC2SD120N80PA Silicon Carbide Schottky Diode Datasheet 1. Maximum Ratings Characteristic Symbol Conditions Value Unit VRRM - 1200 V VR - 1200 V TC = 25 °C 75 / 150 TC = 100 °C 50 / 100 TC = 125 °C 40 / 80 IFSM TC = 25 °C, tp = 10 ms, Half sine pulse 300 A 2 TC = 25 °C, tp = 10 ms, Half sine pulse 450 A2s TC = 25 °C 258 / 516 TC = 110 °C 112 / 224 TJ - -55 to 175 °C TSTG - -55 to 150 °C Repetitive Peak Reverse Voltage DC Blocking Voltage Continuous Forward Current (Per Leg / Component) IF Non-repetitive Forward Surge Current (Per Leg) 2 I t (Per Leg) I dt Power Dissipation (Per Leg / Component) PTot Operating Junction Temperature Storage Temperature A W Note: All ratings are per leg unless otherwise specified 2. Package Specifications Characteristic Symbol Mounting Torque Striking Distance Through Air Isolation Voltage Min Typ Max Screws to heatsink - - 1.5 Terminal connection screws - - 1.3 dSpp Terminal to terminal 10.5 - - dSpb Terminal to backside 8.5 - - dApp Terminal to terminal 3.2 - - dApb Terminal to backside 6.8 - - 50 / 60 Hz - RMS, IISOL - - 3000 50 / 60 Hz - RMS, IISOL - - 2500 - 30 - MD Creepage Distance on Surface Value Conditions VISOL Weight - - Unit Nm mm mm V g 3. Thermal Characteristics Characteristic Symbol Value Unit Rth,JC,MAX 0.58 / 0.29 °C/W Maximum Thermal Resistance (Per Leg / Component) Note: All ratings are per leg unless otherwise specified 4. Electrical Characteristics Characteristic Symbol Forward Voltage VF Reverse Current IR Total Capacitance C Total Capacitive Charge QC Capacitive Stored Energy EC Value Conditions Min Typ Max IF = 40 A, TJ = 25 °C - 1.5 1.8 IF = 40 A, TJ = 175 °C - 2.1 - VR = 1200 V, TJ = 25 °C -