MCC95-08I01B

MCC 95 MCD 95 Thyristor Modules Thyristor/Diode Modules VRSM VDSM VRRM VDRM Type V 900 1300 1500 1700 1900 V 800 1200 1400 1600 1800 Version MCC 95-08 MCC 95-12 MCC 95-14 MCC 95-16 MCC 95-18 Symbol ITRMS = 2x 180 A ITAVM = 2x 116 A VRRM = 800-1800 V 1 1B io1B / io1B / io1B / io1B / io1B / 8B io8B io8B io8B io8B io8B Version MCD 95-08 MCD 95-12 MCD 95-14 MCD 95-16 MCD 95-18 Conditions 1B io1B / io1B / io1B / io1B / io1B / ITSM, IFSM 180 116 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 2250 2400 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 2000 2150 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 25 300 23 900 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) 20 000 19 100 A2s A2s 150 A/µs 500 A/µs 1000 V/µs 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ 2.5 - 4 2.5 - 4 Nm Nm 85 g I2t (di/dt)cr TVJ = TVJM repetitive, IT = 250 A f = 50 Hz; tp = 200 µs; VD = 2/3 VDRM IG = 0.45 A diG /dt = 0.45 A/µs non repetitive, IT = ITAVM (dv/dt)cr TVJ = TVJM; VD = 2/3 VDRM RGK = ∞; method 1 (linear voltage rise) PGM TVJ = TVJM; tp = 30 µs IT = IT(AV)M; tp = 500 µs PGAV VISOL 50/60 Hz, RMS t = 1 min IISOL < 1 mA t=1s Md Mounting torque (M5) Terminal connection torque (M5) Weight Typical including screws Data according to IEC 60747 and refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. © 2010 IXYS All rights reserved 3 6 7 4 5 8B io8B io8B io8B io8B io8B Maximum Ratings ITRMS, IFRMS TVJ = TVJM ITAVM, IFAVM TC = 85°C; 180° sine 2 3 6 7 1 5 4 2 3 1 5 4 2 MCC Version 1 MCD Version 1 3 6 1 5 2 3 1 5 2 MCC Version 8 MCD Version 8 Features • International standard package, JEDEC TO-240 AA • Direct copper bonded Al2O3 -ceramic base plate • Planar passivated chips • Isolation voltage 3600 V~ • UL registered, E 72873 • Gate-cathode twin pins for version 1 Applications • DC Motor control • Softstart AC motor controller • Light, heat and temperature control Advantages • Space and weight savings • Simple mounting with two screws • Improved temperature & power cycling • Reduced protection circuits 20101116a 1-5 MCC 95 MCD 95 Conditions 100 Characteristic Values typ. IRRM, IDRM VR / VD = VRRM / VDRM TVJ = TVJM VT, VF IT / IF = 300 A VT0 rt VGT tp = 30 µs tp = 500 µs max. 5 mA TVJ = 25°C 1.5 V For power-loss calculations only TVJ = TVJM 0.8 2.4 V mW VG VD = 6 V VD = 6 V TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C 2.5 2.6 150 200 V V mA mA [V] VGD IGD VD = 2/3 VDRM; TVJ = TVJM 0.2 10 V mA IL tp = 10 µs; VD = 6 V IG = 0.45 A; diG /dt = 0.45 A/µs TVJ = 25°C 450 mA IH VD = 6 V; RGK = ∞; TVJ = 25°C 200 mA tgd VD = ½VDRM IG = 0.45 A; diG /dt = 0.45 A/µs TVJ = 25°C 2 µs tq VD = /3 VDRM dv/dt = 20 V/µs; -di/dt = 10 A/µs IT = 150 A; VR = 100 V; tp = 200 µs TVJ = TVJM QS IRM IT / IF = 50 A; -di/dt = 6 A/µs TVJ = TVJM RthJC per thyristor; DC current per module per thyristor; DC current per module RthJK dS dA a 1 0.1 0.01 IGT (TVJ = -40°C) IGT (TVJ = 0°C) IGT (TVJ = 25°C) IGD 0.1 1 10 IG [A] Fig. 1 Gate trigger characteristics 100 2 185 other values see Fig. 8/9 Creeping distance on surface Creepage distance in air Maximum allowable acceleration IXYS reserves the right to change limits, test conditions and dimensions. TVJ = 25°C µs 170 45 µC A 0.22 0.11 0.42 0.21 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 Optional accessories for modules Coded gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = Right for pin pair 6/7) CSA class 5851, guide 460-1-1 © 2010 IXYS All rights reserved PGM = 120 W 60 W PGAV = 8 W 125°C IGT 10 25°C Symbol 10 tgd [µs] limit 1 0.1 0.01 typ. 0.1 1 10 IG [A] Fig. 2 Gate trigger delay time 20101116a 2-5 MCC 95 MCD 95 Dimensions in mm (1 mm = 0.0394“) MCC... Version 1B MCD... Version 1B A 2.8 - 0.8 DIN 46244 92 ±0.5 92 ±0.5 80 ±0.3 4.4 25 ±0.3 5.5 ±0.1 6 10 ±0.1 14.8 10 M5 4.4 5 20.8 ±0.25 4.4 25 ±0.3 45 ±0.3 45 ±0.3 65 ±0.3 65 ±0.3 Optional accessories: Keyed gate/cathode twin plugs Wire length: 350 mm, gate = yellow, cathode = red UL 758, style 1385, CSA class 5851, guide 460-1-1 Type ZY 200L (L = Left for pin pair 4/5) Optional accessories: Keyed gate/cathode twin plugs Wire length: 350 mm, gate = yellow, cathode = red UL 758, style 1385, CSA class 5851, guide 460-1-1 Type ZY 200L (L = Left for pin pair 4/5) Type ZY 200R (R = Right for pin pair 6/7) MCC... Version 8B MCD... Version 8B A 2.8 - 0.8 DIN 46244 0.25 65 x 19 General tolerance: DIN ISO 2768 class „c“ General tolerance: DIN ISO 2768 class „c“ 92 ±0.5 92 ±0.5 80 ±0.3 5.5 ±0.1 10 M5 25 ±0.3 25 ±0.3 45 ±0.3 65 ±0.3 IXYS reserves the right to change limits, test conditions and dimensions. 6 6.9 10 ±0.1 14.8 6.9 6.9 6 20.8 ±0.25 10 M5 10 ±0.1 5.5 ±0.1 80 ±0.3 © 2010 IXYS All rights reserved 23.5 +0.4 28.5 65 x 19 0.25 7.5 - 01 30.2 +0.8 - 02 23.5 29.7 ±0.2 28.5 7.5 - 01 30.2 +0.8 - 02 +0.4 3.5 3.5 A 2.8 - 0.8 DIN 46244 29.7 ±0.2 5.5 ±0.1 14.8 10 M5 6 10 ±0.1 20.8 ±0.25 80 ±0.3 14.8 23.5 General tolerance: DIN ISO 2768 class „c“ General tolerance: DIN ISO 2768 class „c“ 20.8 ±0.25 29.7 ±0.2 +0.4 28.5 65 x 19 0.25 65 x 19 0.25 7.5 - 01 30.2 +0.8 - 02 23.5 29.7 ±0.2 28.5 7.5 - 01 30.2 +0.8 - 02 +0.4 3.5 3.5 A 2.8 - 0.8 DIN 46244 45 ±0.3 65 ±0.3 20101116a 3-5 MCC 95 MCD 95 3000 105 250 VR = 0 V 2500 2000 ITSM 1500 DC 180° sin 120° 60° 30° 200 50 Hz 80% VRRM TVJ = 45°C TVJ = 125°C ITAVM 150 2 [A] It [A] 2 [A s] 100 TVJ = 45°C 1000 50 500 TVJ = 125°C 0 0.001 0.01 t [s] 0.1 104 1 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration 1 0 10 t [ms] 0 25 50 75 100 125 150 TC [°C] Fig. 4a Maximum forward current at case temperature Fig. 4 I2t versus time (1-10 ms) 250 RthKA K/W 0.4 0.6 0.8 1 1.2 1.5 2 3 200 Ptot 150 [W] DC 180° sin 120° 60° 30° 100 Fig. 5 Power dissipation versus on-state current & ambient temperature (per thyristor or diode) 50 0 0 50 100 150 0 50 100 150 Ta [°C] ITAVM, IFAVM [A] 1000 RthKA K/W 0.03 0.06 0.08 0.12 0.15 0.3 0.5 800 Ptot 600 [W] 400 Circuit B6 3x MCC95 or 200 0 Fig. 6 Three phase rectifier bridge: Power dissipation vs. direct output current and ambient temperature 3x MCD95 0 100 200 IdAVM [A] 300 0 50 100 IXYS reserves the right to change limits, test conditions and dimensions. © 2010 IXYS All rights reserved 150 Ta [°C] 20101116a 4-5 MCC 95 MCD 95 1200 Circuit W3 3x MCC95 or 3x MCD95 1000 RthKA K/W 0.03 0.06 0.08 0.12 0.15 0.3 0.5 800 Ptot [W] Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature 600 400 200 0 0 50 100 150 IRMS [A] 200 250 0 50 Ta [°C] 100 150 0.30 Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) 0.25 RthJC for various conduction angles d: 30° 60° 120° 180° DC 0.20 ZthJC 0.15 [K/W] d DC 180° 120° 60° 30° 0.10 Constants for ZthJC calculation: 0.05 0.00 10-3 10-2 10-1 t [s] 100 101 102 0.5 [K/W] 30° 60° 120° 180° DC 0.3 Rthi (K/W) 0.0066 0.0678 0.1456 ti (s) 0.0019 0.0477 0.344 RthJK for various conduction angles d: d DC 180° 120° 60° 30° 0.2 0.1 0.0 10-3 i 1 2 3 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) 0.4 ZthJK RthJC (K/W) 0.22 0.23 0.25 0.27 0.28 RthJK (K/W) 0.42 0.43 0.45 0.47 0.48 Constants for ZthJK calculation: 10-2 10-1 100 101 t [s] IXYS reserves the right to change limits, test conditions and dimensions. © 2010 IXYS All rights reserved 102 103 i 1 2 3 4 Rthi (K/W) 0.0066 0.0678 0.1456 0.2 ti (s) 0.0019 0.0477 0.344 1.32 20101116a 5-5