PAA140STR

PAA140 400V, 250mA Dual Single-Pole Normally Open Relays INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 400 250 8 Units V mArms / mADC  Description The PAA140 is a 400V, 250mA, 8, dual normally open (1-Form-A) relay. This high performance leader provides a high peak load voltage handling capability combined with a very low on-resistance for specialized applications. Features • • • • • • • 3750Vrms Input/Output Isolation Low Drive Power Requirements Greater Reliability than Electromechanical Relays No EMI/RFI Generation Small 8-Pin Package Flammability Rating UL 94 V-0 Tape & Reel Versions Available Applications • • • • • • • • • • Telecommunications Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment-Patient/Equipment Isolation Security Industrial Controls Approvals • UL Recognized Component: File # E76270 • CSA Certified Component: Certificate # 1175739 • TUV EN 62368-1: Certificate # B 082667 0008 Ordering Information Part # PAA140 PAA140P PAA140PTR PAA140S PAA140STR Description 8-Pin DIP (50/tube) 8-Pin SOIC (Flatpack) (50/tube) 8-Pin SOIC (Flatpack) (1000/Reel) 8-Pin Surface Mount (50/tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration + Control - Switch #1 – Control - Switch #1 + Control - Switch #2 – Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton DS-PAA140-R12 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION PAA140 Absolute Maximum Ratings @ 25ºC Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature, Ambient Storage Temperature 1 Derate linearly 1.33 mW / ºC 2 Derate output power linearly 6.67 mW / ºC Ratings 400 5 50 1 150 800 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms °C °C Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Electrical Characteristics @ 25ºC Parameter Output Characteristics Blocking Voltage Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance Input to Output Conditions Symbol Min Typ Max Units IL=1A VDRM 400 - - VP t=10ms IL=250mA VL=400VP IL ILPK RON ILEAK - 6 - 250 ±500 8 1 mArms / mADC mAP  µA IF=5mA, VL=10V ton toff - - 3 1 ms IL=250mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.36 - 5 1.5 10 mA mA V µA VIO=0V, f=1MHz CIO - 3 - pF 1 If both poles operate simultaneously, then load current must be derated so that the package power dissipation value is not exceeded. 2 Measurement taken within one second of on-time. 2 www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION PAA140 PERFORMANCE DATA* Typical LED Forward Voltage Drop (N=50, IF=5mA) 25 Device Count (N) 20 15 10 5 1.364 15 10 5 0.39 Device Count (N) 15 10 5 0 0.65 0.91 1.17 1.43 1.69 Turn-On Time (ms) 2.1 2.7 3.3 3.9 LED Current (mA) 4.5 10 5 0.018 0.030 0.042 0.054 0.066 0.078 0.090 Turn-Off Time (ms) Typical On-Resistance Distribution (N=50, IF=5mA, IL=250mADC) 35 30 20 15 10 5 25 20 15 10 5 0 1.5 15 1.95 Typical IF for Switch Dropout (N=50, IL=250mADC) 25 20 20 0 1.366 1.368 1.370 1.372 LED Forward Voltage Drop (V) Typical IF for Switch Operation (N=50, IL=250mADC) 25 Device Count (N) 20 0 0 Typical Turn-Off Time (N=50, IF=5mA, IL=250mADC) 25 Device Count (N) Device Count (N) 25 Device Count (N) 30 Typical Turn-On Time (N=50, IF=5mA, IL=250mADC) 0 5.1 0.9 1.5 2.1 2.7 3.3 LED Current (mA) 3.9 4.5 5.03 5.38 5.73 6.08 6.43 6.78 On-Resistance (:) 7.13 Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 430 1.6 IF=10mA IF=5mA IF=2mA 1.5 1.4 1.3 1.2 1.1 1.0 -50 -25 0 25 50 Temperature (ºC) 75 100 502 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Turn-Off Time (ms) Turn-On Time (ms) LED Forward Voltage Drop (V) 1.7 454 466 478 490 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=250mADC) Typical LED Forward Voltage Drop vs. Temperature 1.8 442 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 Typical Turn-Off Time vs. LED Forward Current (IL=250mADC) 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. R12 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION PAA140 PERFORMANCE DATA* Typical Turn-On Time vs. Temperature (IL=250mADC) 0.07 I F = 5mA I F = 10mA I F = 20mA 1.5 1.0 0.5 0.05 0.04 0.03 0.02 -20 0 20 40 60 Temperature (ºC) 80 0 -40 100 Typical IF for Switch Operation vs. Temperature (IL=250mADC) 5.0 5.0 3.5 3.0 2.5 2.0 20 40 60 Temperature (ºC) 80 Typical IF for Switch Dropout vs. Temperature (IL=250mADC) -20 0 20 40 60 Temperature (ºC) 80 4.0 3.5 3.0 2.5 1.5 -40 100 Maximum Load Current vs. Temperature -20 0 20 40 60 Temperature (ºC) 80 100 200 150 Blocking Voltage (VP) I F = 20mA I F = 10mA I F = 5mA -20 0 20 40 60 80 Temperature (ºC) 100 80 100 -1.0 -0.5 0 0.5 Load Voltage (V) 1.0 1.5 2.0 0.10 475 470 465 460 0.08 0.06 0.04 455 445 -40 120 20 40 60 Temperature (ºC) 0.12 480 0.02 450 100 -40 0 Typical Leakage vs. Temperature Measured Across Pins 5&6 or 7&8 485 300 -20 250 200 150 100 50 0 -50 -100 -150 -200 -250 -2.0 -1.5 Typical Blocking Voltage vs. Temperature 350 250 6 Typical Load Current vs. Load Voltage (IF=5mA) Leakage (PA) -40 7 -40 100 2.0 1.5 Load Current (mA) 0 Load Current (mA) 4.0 8 4 -20 4.5 LED Current (mA) LED Current (mA) 4.5 9 5 0.01 0 -40 On-Resistance (:) 2.0 Typical On-Resistance vs. Temperature (IF=5mA, IL=250mADC) 10 0.06 Turn-Off Time (ms) Turn-On Time (ms) 2.5 Typical Turn-Off Time vs. Temperature (IF=5mA, IL=250mADC) -20 0 20 40 60 Temperature (ºC) 80 100 10s 100s 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10Ps 100Ps 1ms 10ms 100ms Time 1s *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. 4 www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION PAA140 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification PAA140S MSL 1 PAA140P MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the IPC/JEDEC J-STD-020 Classification Temperature (TC) and the maximum total dwell time (tP) in all reflow processes that the body temperature of these surface mount devices may be (TC - 5)°C or greater. The device’s body temperature must not exceed the Classification Temperature at any time during reflow soldering processes. Device Classification Temperature (Tc) Dwell Time (tP) Max Reflow Cycles PAA140S PAA140P 250ºC 245ºC 30 seconds 30 seconds 3 3 For through-hole devices, the maximum pin temperature and maximum dwell time through all solder waves is provided in the table below. Dwell time is the interval beginning when the pins are initially immersed into the solder wave until they exit the solder wave. For multiple waves, the dwell time is from entering the first wave until exiting the last wave. During this time, pin temperatures must not exceed the maximum temperature given in the table below. Body temperature of the device must not exceed the limit shown in the table below at any time during the soldering process. Device PAA140 Maximum Pin Temperature 260ºC Maximum Body Temperature 250ºC Maximum Dwell Time 10 seconds* Wave Cycles 1 *Total cumulative duration of all waves. Board Wash IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to halide flux or solvents. R12 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION PAA140 Mechanical Dimensions PAA140 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 8-0.762 DIA. (8-0.030 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 PCB Hole Pattern 7.620 ± 0.254 (0.300 ± 0.010) 3.302 ± 0.051 (0.130 ± 0.002) 0.457 ± 0.076 (0.018 ± 0.003) 7.620 ± 0.127 (0.300 ± 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 ± 0.127 (0.300 ± 0.005) 0.254 ± 0.0127 (0.010 ± 0.0005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) PAA140S PCB Land Pattern 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 0.635 ± 0.127 (0.025 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.0127 (0.010 ± 0.0005) 0.65 (0.0255) 4.445 ± 0.127 (0.175 ± 0.005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) PAA140P 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 ± 0.127 (0.370 ± 0.005) Pin 1 9.652 ± 0.381 (0.380 ± 0.015) 7.620 ± 0.254 (0.300 ± 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 0.203 ± 0.013 (0.008 ± 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 ± 0.025 (0.085 ± 0.001) 0.457 ± 0.076 (0.018 ± 0.003) 0.864 ± 0.120 (0.034 ± 0.004) 6 PCB Land Pattern Dimensions mm (inches) www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION PAA140 PAA140STR Tape & Reel 2.0 (0.08) 4.0 (0.16) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 7.5 (0.30) Bo=10.30 (0.406) K0 =4.90 (0.193) 16.0±0.3 (0.63±0.012) Ao=10.30 (0.406) K1 =4.20 (0.165) Embossed Carrier Embossment P1=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 3. Controlling dimension: mm PAA140PTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 7.50 (0.295) Embossment W = 16.00 (0.63) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) Ao = 10.30 (0.406) P1 = 12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 3. Controlling dimension: mm For additional information please visit our website at: https://www.ixysic.com Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at https://www.littelfuse.com/disclaimer-electronics. 7 Specification: DS-PAA140-R12 ©Copyright 2021, Littelfuse, Inc. OptoMOS® is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. 11/4/2021