VMK165-007T

VMK165-007T Preliminary VDSS = 70 V ID25 = 165 A RDS(on) = 7 mΩ Dual Power MOSFET Module Common-Source connected N-Channel Enhancement Mode Part number VMK165-007T E72873 4 5 1 2 3 6 7 Features / Advantages: Applications: Package: TO-240AA • Two MOSFET with common source • Push-pull inverters • Switched-mode and resonant-mode power supplies • Uninterruptible power supplies (UPS) • AC static switches • Isolation Voltage: 4800 V~ • Industry standard outline • RoHS compliant • Soldering pins for PCB mounting • Base plate: DCB ceramic • Reduced weight • Advanced power cycling • Direct copper bonded Al2O3 ceramic base plate • Low RDS(on) HDMOSTM process • Low package inductance for high speed switching • Kelvin source contact • Keyed twin plugs • High power density • Low losses Disclaimer Notice Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. IXYS reserves the right to change limits, test conditions and dimensions. © 2020 IXYS All rights reserved 20200724a 1-4 VMK165-007T Preliminary MOSFETs Ratings Symbol Definitions VDSS drain source breakdown voltage Conditions min. VDGR drain gate voltage RGS = 6.8 kΩ VGS VGSM gate source voltage max. transient gate source voltage Continuous Transient ID25 ID100 IDM continuous drain current drain current maximum pulsed drain current Ptot total power dissipation VDSS drain source breakdown voltage VGS = 0 V; ID = 1 mA 70 VGS(th) gate threshold voltage VDS = VGS; ID = 8 mA 2 IGSS gate source leakage current VGS = ±20 V DC; VDS = 0 IDSS drain source leakage current VDS = VDSS; VGS = 0 V VDS = 0.8 • VDSS; VGS = 0 V TVJ = 25°C TVJ = 125°C RDS(on) staticdrain source on resistance VGS = 10 V; ID = 0.5 • ID25 TVJ = 25°C typ. max. Unit TVJ = 25°C to125°C 70 V TVJ = 25°C to125°C 70 V ±20 ±30 V V tp = 10 µs, pulse width limited by TJM TC = 25°C TC = 100°C TC = 25°C 165 104 660 A A A TVJ = 125°C TC = 25°C 390 W V 4 6 V 500 nA 200 1 µA mA 7 mΩ Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 % gfs forward transconductance VDS = 10 V; ID = 0.5 • ID25 pulsed Ciss Coss Crss input capacitance output capacitance reverse transfer (Miller) capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz td(on) tr td(off) tf turn-on delay time current rise time turn-off delay time current fall time Qg Qgs Qgd total gate charge gate source charge gate drain (Miller) charge RthJC RthJH thermal resistance junction to case thermal resistance junction to heatsink 60 80 S 8.8 4.0 2.4 nF nF nF VGS = 10 V; VDS = 0.5 • VDSS; ID = 0.5 • ID25 RG = 1 Ω (external), resistive load 120 280 390 110 ns ns ns ns VGS = 10 V; VDS = 0.5 • VDSS; ID = 0.5 • ID25 480 60 240 nC nC nC 0.2 0.32 K/W K/W with heat transfer paste Source-Drain Diodes Ratings Symbol Definitions Conditions min. typ. IS continuous source current VGS = 0 V 165 A ISM maximum pulsed source current Repetitive; pulse width limited by TJM 660 A VSD forward voltage drop IF = IS; VGS = 0 V Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 % 1.5 V trr reverse recovery time IF = 50 A, -di/dt = 200 A/µs; VDS = 25 V; VGS = 0 V 150 max. ns Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. TJ = 25°C, unless otherwise specified IXYS reserves the right to change limits, test conditions and dimensions. © 2020 IXYS All rights reserved 20200724a 2-4 VMK165-007T Preliminary Package TO-240AA Ratings Symbol Definitions Conditions IRMS RMS current per terminal TVJ virtual junction temperature TVJM maximum virtual junction temperature Tstg storage temperature min. -40 -40 Weight MD MT dSpp/App dSpb/Apb VISOL typ. max. Unit 200 A 150 °C 150 °C 125 °C 81 mounting torque terminal torque 2.5 2.5 creepage distance on surface | striking distance through air isolation voltage t = 1 second t = 1 minute IXYS reserves the right to change limits, test conditions and dimensions. © 2020 IXYS All rights reserved g 4 4 Nm Nm terminal to terminal 13.0 9.7 mm terminal to backside 16.0 16.0 mm 50/60 Hz, RMS, IISOL < 1 mA 4800 V 4000 V 20200724a 3-4 VMK165-007T Preliminary Outlines TO-240AA Dimensions in mm (1 mm = 0.0394") 4 5 1 2 IXYS reserves the right to change limits, test conditions and dimensions. © 2020 IXYS All rights reserved 3 6 7 20200724a 4-4