VUI9-06N7

VUI 9-06N7 Advanced Technical Information VRRM = 1200 V IFAV25 = 15 A Rectifier Module for Power Factor Correction VCES = 600 V IC25 = 37 A Fast Single Phase Rectifier Ultra Fast Boost Chopper J D 11 D 13 H D 12 N D1 A E D 14 7 B T G G Typical Rectified Mains Power Pn = 900 W at Vn = 110 V Pn = 2100 W at Vn = 240 V at VDC = 400 V, fT = 75 kHz, TC = 80°C Application Input Rectifier Bridge D11 - D14 IFAV25 IFAV80 TC = 25°C; sine 180° TC = 80°C; sine 180° 15 10 A A • single phase rectification with power factor correction (PFC) • low harmonic content of mains current • mains current and voltage in phase • wide input voltage range, controlled output voltage IFSM TVJ = 25°C; t = 10 ms sine 50 Hz 75 A Features Symbol Conditions Maximum Ratings VRRM 1200 V Symbol Conditions Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. VF IF = 10 A TVJ = 25°C TVJ = 125°C 1.4 1.6 IR VR = VRRM TVJ = 25°C TVJ = 125°C VR = 100 V; IF = 10 A; -di/dt = 5 A/µs RthJC RthJS (per diode) with heat transfer paste V V 0.05 0.5 mA mA 1 µs tbd 2.5 K/W K/W 006 trr 1.8 • high level of integration only one power semiconductor module required for the whole PFC rectifier • standard PFC control ICs useable • fast rectifier diodes for enhanced EMC behaviour • NPT IGBT with low saturation voltage, ultra fast switching capability, high RBSOA and short circuit ruggedness • internally series connected HiPerFREDTM free wheeling diode for fast and soft reverse recovery at high switching frequency • package with insulated DCB base and soldering pins for PCB mounting © 2000 IXYS All rights reserved 1-3 VUI 9-06N7 Chopper T Symbol Conditions VCES TVJ = 25°C to 150°C 600 V VGES Continous ±20 V IC25 IC80 TC = 25°C TC = 80°C 37 25 A A RBSOA VCE = 600 V; RG = 10 W; TVJ = 125°C Clamped inductive load; L = 100 µH tSC VCE = 600 V; VGE = ±15 V; RG = 10 W; TVJ = 125°C; non-repetitive Symbol Conditions VCE(sat) IC = 10 A; VGE = 15 V ; TVJ = 25°C TVJ = 125°C VGE(th) IC = 1 mA; VGE = VCE ICES VCE = VCES; VGE = 0 V; TVJ = 25°C TVJ = 125°C IGES td(on) tr td(off) tf Eon Eoff Maximum Ratings ICM = 100 VCEK £ VCES A 10 µs Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. 1.5 1.6 3 1.8 V V 5 V 0.04 mA mA 100 nA 1 VCE = 0 V; VGE = ±20 V Inductive load, TVJ = 125°C VCE = 400 V; IC = 10 A VGE = ±15 V; RG = 10 W 30 50 320 70 0.60 0.31 ns ns ns ns mJ mJ Cies QGon VCE = 25 V; VGE = 0 V; f = 1 MHz VCE = 480 V; VGE = 15 V; IC = 10 A 1600 140 pF nC RthJC RthJS with heat transfer paste tbd 0.96 K/W K/W Chopper D1 Symbol Conditions VRRM TVJ = 25°C to 150°C IF25 IF80 TC = 25°C TC = 80°C Symbol Conditions VF IF = 10 A; TVJ = 25°C TVJ = 125°C IR VR = VRRM; TVJ = 25°C TVJ = 125°C IRM trr RthJC RthJS Maximum Ratings 600 V 35 22 A A Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. 3.2 2.4 V V 0.1 0.1 mA mA IF = 10 A; diF/dt = -400 A/µs; TVJ = 125°C VR = 400 V tbd tbd A ns with heat transfer paste tbd 1.15 K/W K/W © 2000 IXYS All rights reserved 2.2 2-3 VUI 9-06N7 Module Symbol Conditions Maximum Ratings TVJ Tstg VISOL IISOL £ 1 mA; 50/60 Hz; t = 1 min Md Mounting torque (M4) Symbol Conditions dS dA Creepage distance on surface Strike distance through air Weight typ. -40...+150 -40...+125 °C °C 3000 V~ 1.5 - 2.0 Nm Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. tbd tbd mm mm 18 g Dimensions in mm (1 mm = 0.0394") 0,1 0,1 13,7+-0,1 13,7+-0,1 + 0,3 + 0,3 10,8 -0,3 10,8 -0,3 0,2 30,3+-0,2 0,1 13,7+-0,1 0,3 10,8+-0,3 0,3 6,9+-0,3 0 ,3 0,3 8,6 +-0,3 10,8+-0,3 R2,15 0,2 1,2+-0,2 0,2 1,2+-0,2 0,3 5,2+-0,3 1,5 1 8 0,5 20,3+-0,2 2 39 0,2 47 +-0,2 © 2000 IXYS All rights reserved 3-3