VUO122-18NO7

VUO 122 IdAV = 117 A VRRM = 800-1800 V Three Phase Rectifier Bridge in ECO-PAC 2 Preliminary data VRSM VRRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 PS16 Types ~A 1 ~L 9 ~ K10 VUO 122-08NO7 VUO 122-12NO7 VUO 122-14NO7 VUO 122-16NO7 VUO 122-18NO7 EG 1 Pin arangement see outlines Symbol Conditions IdAV ① TC = 100°C, module 117 A IFSM TVJ = 45°C; VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 900 990 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 770 850 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4050 4050 A2 s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 2950 2950 A2 s A2 s -40...+150 150 -40...+125 °C °C °C 2500 3000 V~ V~ 1.5 - 2 Nm I2t Maximum Ratings TVJ TVJM Tstg VISOL 50/60 Hz, RMS IISOL ≤ 1 mA Md Mounting torque (M4) Weight typ. Symbol Conditions IR VR = VRRM; VR = VRRM; TVJ = 25°C TVJ = TVJM ≤ ≤ 0.5 5 mA mA VF IF TVJ = 25°C ≤ 1.75 V VT0 rT For power-loss calculations only 0.8 4 V mΩ RthJC per diode; DC current per module per diode, DC current (typ.) per module (typ.) 0.85 0.142 1.15 0.192 K/W K/W K/W K/W 11.2 9.7 50 mm mm m/s2 RthJH dS dA a t = 1 min t=1s 22 = 200 A; g Characteristic Values Creeping distance on surface Creepage distance in air Max. allowable acceleration Features • Package with DCB ceramic base plate • Isolation voltage 3000 V~ • Planar passivated chips • Low forward voltage drop • Leads suitable for PC board soldering Applications • • • • Supplies for DC power equipment Input rectifiers for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability • Small and light weight Dimensions in mm (1 mm = 0.0394") IXYS reserves the right to change limits, test conditions and dimensions. © 2004 IXYS All rights reserved 421 Data according to IEC 60747 refer to a single diode unless otherwise stated ① for resistive load at bridge output. 1-1 B3