VW2X30-08IO1

VW 2x30 AC Controller Modules IRMS = 2x 30 A VRRM = 800-1600 V VRSM VDSM V 800 1200 1400 1600 VRRM VDRM V 800 1200 1400 1600 Type 1 2 5 4 45 12 VW2x30-08io1 VW2x30-12io1 VW2x30-14io1 VW2x30-16io1 7 6 9 10 9 10 67 Symbol IRMS ITRMS ITAVM ITSM Test Conditions TC = 85°C, (per phase) TVJ = TVJM TC = 85°C; (180° sine ; per thyristor) TVJ = 45°C; VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Maximum Ratings 30 22 14 200 210 180 190 200 190 160 150 100 A A A A A A A A2s A2s A2s A2s A/ms Features q q q q q Thyristor controller for AC (circuit W2C acc. to IEC) for mains frequency Soldering connections for PCB mounting Isolation voltage 3600 V~ Planar passivated chips UL applied I2t TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 Applications q (di/dt)cr TVJ = TVJM repetitive, IT = 45 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM tp = 30 ms tp = 300 ms q q 500 1000 10 5 0.5 10 -40...+125 125 -40...+125 A/ms V/ms W W W V °C °C °C V~ V~ q Switching and control of three phase AC circuits Softstart AC motor controller Solid state switches Light and temperature control (dv/dt)cr PGM PGAVM VRGM TVJ TVJM Tstg VISOL Md Weight Advantages q q q Easy to mount with two screws Space and weight savings Improved temperature and power cycling 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s 3000 3600 Mounting torque (M5) typ. 2-2.5/18-22 Nm/lb.in. 35 g © 2000 IXYS All rights reserved 1-3 739 Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions VW 2x30 Symbol ID, IR VT VT0 rT VGT IGT VGD IGD IL IH tgd tq RthJC RthJK dS dA a Test Conditions TVJ = TVJM; VR = VRRM; VD = VDRM IT = 45 A; TVJ = 25°C Characteristic Values £ £ 5 1.81 0.8 25 £ £ £ £ £ £ £ £ £ typ. 1.5 1.6 100 200 0.2 5 450 200 2 150 1.7 0.43 2.0 0.5 12.7 9.4 50 mA V V mW V V mA mA V mA mA 0.1 IGD, TVJ = 125°C 3 10 V VG 1: IGT, TVJ = 125°C 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C For power-loss calculations only VD = 6 V; VD = 6 V; TVJ = TVJM; TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C VD = 2/3 VDRM 1 1 2 5 4 6 TVJ = 25°C; tP = 10 ms IG = 0.45 A; diG/dt = 0.45 A/ms TVJ = 25°C; VD = 6 V; RGK = ¥ TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms TVJ = TVJM; IT = 20 A, tP = 200 ms; di/dt = -10 A/ms VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM per thyristor; DC per module per thyristor; DC per module Creeping distance on surface Creepage distance in air Max. allowable acceleration 4: PGAV = 0.5 W 5: PGM = 5 W 6: PGM = 10 W mA ms ms K/W K/W K/W K/W mm mm m/s2 10 1 10 100 1000 IG mA Fig. 1 Gate trigger characteristics 1000 TVJ = 25°C µs tgd 100 typ. Limit 1 10 100 Dimensions in mm (1 mm = 0.0394") IG mA 1000 Fig. 2 Gate trigger delay time 50 A 45 IF 40 35 30 25 20 15 TVJ =125°C 10 5 0 0.0 0.5 1.0 1.5 VT V 2.0 TVJ = 25°C 140 A TVJ = 125°C TK = 85°C 120 IRMS 100 80 60 40 20 0 0.01 VW2x30 0.1 1 t s 10 © 2000 IXYS All rights reserved 2-3 739 Fig. 3 Forward current versus voltage drop per leg Fig. 4 Rated RMS current versus time (360° conduction) VW 2x30 100 W 90 Ptot 80 RthKA K/W 70 60 50 40 30 20 10 0 0 5 10 15 20 25 IRMS 30 A 0 25 50 75 100 TA 125 °C 150 Circuit W3C2 1x VW2x30 0.5 1 1.5 2 3 4 6 ITSM 250 A 200 50 Hz 80 % VRRM 150 TVJ = 45°C 100 50 TVJ = 125°C 0 0.001 0.01 t 0.1 s 1 Fig. 5 Load current capability for two phase AC controller 100 W 90 Ptot 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 A 0 ITAVM 25 50 75 100 TA 125 °C 150 Circuit B2C 2x VW2x30 RthKA K/W 0.5 1 1.5 2 3 4 6 Fig. 6 Surge overload current 1000 VR = 0V A2s It 2 300 200 TVJ = 45°C TVJ = 125°C 100 1 t ms 10 Fig. 7 Power dissipation versus direct output current and ambient temperature cyclo converter, four quadrant operation 2.5 K/W 2.0 ZthJK 1.5 Constants for ZthJK calculation: Rthi / (K/W) ti / (s) 0.023 0.053 1.524 0.4 0.002 0.013 0.16 0.98 RthJK for various conduction angles: RthJK / (K/W) d: DC 180° 120° 60° 30° 30 ° DC Fig. 8 I²t versus time (per thyristor) 25 A ITAVM 20 DC 180° sin 120° 60° 30° 15 1.0 10 0.5 0.0 0.001 2 2.01 2.14 2.21 2.27 5 0 10 0 25 50 75 TC 739 0.01 0.1 1 t s 100 125 °C Fig. 9 Transient thermal impedance junction to heatsink (per thyristor) Fig. 10 Maximum forward current at case temperature © 2000 IXYS All rights reserved 3-3