VW2X45-16IO1

VW 2x45 AC Controller Modules IRMS = 2x 45 A VRRM = 800-1600 V VRSM VDSM V 800 1200 1400 1600 VRRM VDRM V 800 1200 1400 1600 Type 1 2 5 4 45 12 VW2x45-08io1 VW2x45-12io1 VW2x45-14io1 VW2x45-16io1 7 6 9 10 9 10 67 Symbol IRMS ITRMS ITAVM ITSM Test Conditions TC = 85°C, (per phase) TVJ = TVJM TC = 85°C; (180° sine ; per thyristor) TVJ = 45°C; VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Maximum Ratings 45 32 20 300 320 270 290 450 430 360 350 100 A A A A A A A A2s A2s A2s A2s A/ms Features q q q q q Thyristor controller for AC (circuit W2C acc. to IEC) for mains frequency Soldering connections for PCB mounting Isolation voltage 3600 V~ Planar passivated chips UL applied I2t TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 Applications q (di/dt)cr TVJ = TVJM repetitive, IT = 45 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM tp = 30 ms tp = 300 ms q q 500 1000 10 5 0.5 10 -40...+125 125 -40...+125 A/ms V/ms W W W V °C °C °C V~ V~ q Switching and control of three phase AC circuits Softstart AC motor controller Solid state switches Light and temperature control (dv/dt)cr PGM PGAVM VRGM TVJ TVJM Tstg VISOL Md Weight Advantages q q q Easy to mount with two screws Space and weight savings Improved temperature and power cycling 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s 3000 3600 Mounting torque (M5) typ. 2-2.5/18-22 Nm/lb.in. 35 g © 2000 IXYS All rights reserved 1-3 739 Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions VW 2x45 Symbol ID, IR VT VT0 rT VGT IGT VGD IGD IL IH tgd tq RthJC RthJK dS dA a Test Conditions TVJ = TVJM; VR = VRRM; VD = VDRM IT = 45 A; TVJ = 25°C Characteristic Values £ £ 5 1.52 0.85 15 £ £ £ £ £ £ £ £ £ typ. 1.5 1.6 100 200 0.2 5 450 200 2 150 1.25 0.31 1.55 0.39 12.7 9.4 50 mA V V mW V V mA mA V mA mA 0.1 IGD, TVJ = 125°C 3 10 V VG 1: IGT, TVJ = 125°C 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C For power-loss calculations only VD = 6 V; VD = 6 V; TVJ = TVJM; TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C VD = 2/3 VDRM 1 1 2 5 4 6 TVJ = 25°C; tP = 10 ms IG = 0.45 A; diG/dt = 0.45 A/ms TVJ = 25°C; VD = 6 V; RGK = ¥ TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms TVJ = TVJM; IT = 20 A, tP = 200 ms; di/dt = -10 A/ms VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM per thyristor; DC per module per thyristor; DC per module Creeping distance on surface Creepage distance in air Max. allowable acceleration 4: PGAV = 0.5 W 5: PGM = 5 W 6: PGM = 10 W mA ms ms K/W K/W K/W K/W mm mm m/s2 10 1 10 100 1000 IG mA Fig. 1 Gate trigger characteristics 1000 TVJ = 25°C µs tgd 100 typ. Limit 1 10 100 Dimensions in mm (1 mm = 0.0394") IG mA 1000 Fig. 2 Gate trigger delay time 60 A IF 50 40 200 A TVJ = 125°C TK = 85°C 175 IRMS 150 125 30 100 75 20 TVJ =125°C 10 25 0 0.0 0 0.01 VW2x45 TVJ = 25°C 50 0.5 1.0 1.5 VT V 2.0 0.1 1 t s 10 © 2000 IXYS All rights reserved 2-3 739 Fig. 3 Forward current versus voltage drop per leg Fig. 4 Rated RMS current versus time (360° conduction) VW 2x45 140 W 120 Ptot 100 80 60 40 20 0 0 10 20 30 IRMS 40 A0 25 50 75 100 TA 125 °C 150 Circuit W3C2 1x VW2x45 RthKA K/W 0.5 1 1.5 2 3 4 6 ITSM 300 A 250 50 Hz 80 % VRRM 200 TVJ = 45°C 150 100 TVJ = 125°C 50 0 0.001 0.01 t 0.1 s 1 Fig. 5 Load current capability for two phase AC controller 140 W 120 Ptot 100 80 60 40 20 0 0 10 20 30 40 A0 ITAVM 25 50 75 100 TA 125 °C 150 Circuit B2C 2x VW2x45 Fig. 6 Surge overload current 1000 VR = 0V A2s RthKA K/W 0.5 1 1.5 2 3 4 6 It TVJ = 45°C 2 TVJ = 125°C 100 1 t ms 10 Fig. 7 Power dissipation versus direct output current and ambient temperature cyclo converter, four quadrant operation 1.8 K/W 1.5 ZthJK 1.2 Constants for ZthJK calculation: Rthi / (K/W) ti / (s) 0.018 0.041 1.181 0.31 0.002 0.013 0.16 0.98 RthJK for various conduction angles: 30 ° DC Fig. 8 I²t versus time (per thyristor) 35 A ITAVM 30 25 20 15 10 DC 180° sin 120° 60° 30° 0.9 0.6 RthJK / (K/W) 1.55 1.62 1.66 1.71 1.76 d: DC 180° 120° 60° 30° 0.3 5 0 0.0 0.001 0.01 0.1 1 t s 10 0 25 50 75 TC 100 125 °C Fig. 9 Transient thermal impedance junction to heatsink (per thyristor) © 2000 IXYS All rights reserved 3-3 739 Fig. 10 Maximum forward current at case temperature