VWO35-08HO7

VWO 35 AC Controller Modules Preliminary data IRMS = 3x 35 A VRRM = 800-1200 V VRSM VDSM V 900 1300 VRRM VDRM V 800 1200 Type H A J C M F VWO 35-08ho7 VWO 35-12ho7 I B L E N G Symbol IRMS ITAVM ITSM Conditions TC = 85°C, (per phase) TC = 85°C; (180° sine ; per thyristor) TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Maximum Ratings 35 16 200 210 180 190 200 150 160 150 A A A A A A A2s A2 s A2s A2 s Features • Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency • Soldering connections for PCB mounting • Isolation voltage 3000 V~ • Planar passivated chips Applications • Switching and control of three phase AC circuits • Softstart AC motor controller • Solid state switches • Light and temperature control Advantages I2t TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 (di/dt)cr TVJ = TVJM repetitive, IT = 20 A f = 50 Hz, tP = 200 µs VD = 2/3 VDRM IG = 0.15 A non repetitive, IT = ITAVM diG/dt = 0.15 A/µs TVJ = TVJM; VDR = 2/3 VDRM RGK = ∞; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM tp = 30 µs tp = 300 µs 100 A/µs 500 A/µs 500 V/µs 10 ≤5 ≤ 2.5 0.5 -40...+125 125 -40...+125 V W W W °C °C °C V~ V~ (dv/dt)cr VRGM PGM PGAVM TVJ TVJM Tstg VISOL Md Weight • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling G 50/60 Hz, RMS IISOL ≤ 1 mA Mounting torque typ. t = 1 min t=1s (M4) 2500 3000 1.5 - 2 Nm 18 g Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. © 2006 IXYS All rights reserved 1-2 0610 VWO 35 Symbol ID, IR VT VT0 rT VGT IGT VGD IGD IL IH tgd RthJC RthJK dS dA a Conditions TVJ = TVJM; VR = VRRM; VD = VDRM IT = 20 A; TVJ = 25°C Characteristic Values < < 5 1.6 mA V For power-loss calculations only VD = 6 V VD = 6 V TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C < < < < < < < < < 0.85 V 27 mΩ 1.5 2.5 25 50 0.2 3 75 50 2 1.3 0.22 1.8 0.3 V V mA mA V mA mA mA µs K/W K/W K/W K/W TVJ = TVJM; VD = 2/3 VDRM TVJ = 25°C; tP = 10 µs IG = 0.1 A; diG/dt = 0.1 A/µs TVJ = 25°C; VD = 6 V; RGK = ∞ TVJ = 25°C; VD = ½ VDRM IG = 0.1 A; diG/dt = 0.1 A/µs per thyristor; DC per module per thyristor; DC per module Creeping distance on surface Creepage distance in air Max. allowable acceleration 11.2 mm 5.0 mm 50 m/s2 Dimensions in mm (1 mm = 0.0394") G IXYS reserves the right to change limits, test conditions and dimensions. © 2006 IXYS All rights reserved 2-2 0610