DD4BA40WA1R400

COMPONENTS PRODUCT INFORMATION NEW High-speed Transmission Compatible Low-profile Docking Connector DD4 Series Receptacle CONNECTOR MB-0270-1 September 2013 RoHS Compliant Cradle Plug The DD4 Series is an external interface connector compatible with high-speed signals such as USB 3.0, DisplayPort™, SATA Gen2. DisplayPort™ is a registered trademark of Video Electronics Standards Association (VESA). Features Connector to transmit high-speed signals of transmission standards such as USB3.0, DisplayPort™, SATA Gen2. Achieves low profile, mounted height 2.8mm to comply with the demand for slimmer devices. Enhanced twisting resistance against insertion and removal through equipping a guide rail on shell. Allows insertion and removal while conducting electricity with first mate last break receptacle side power supply pin. Available on embossed tape for automatic mounting. Applicable Markets Notebook PC, tablet PC, hand-held devices such as portable game player. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 1/12 MB-0270-1 General Specifications ■No. of Contacts: 40 pos. ■Contact Resistance: 50m  max. (initial) ■Rated Current: 0.1A / 1 pos. (signal) 1.1A / 1pos. (power) ■Dielectric Withstanding Voltage: AC300Vr.m.s for 1 minute ■Insulation Resistance: 100M  min. (initial) ■Operating Temperature: -25 Deg. C to +75 Deg. C ■Life time: 5,000 times Materials and Finishes ■Receptacle Component Material and Finish Shell Stainless-steel / Ni plating Insulator Synthetic resin Contact Contact area: Copper alloy / Au plating over Ni Terminal area: Copper alloy / Au flash plating over Ni ■Plug Component Material and Finish Shell Stainless-steel / Ni plating Lock Spring Stainless-steel Inner Insulator Synthetic resin Base Insulator Synthetic resin Contact Contact area: Copper alloy / Au plating over Ni Terminal area: Copper alloy / Au flash plating over Ni ■Cradle Component Material and Finish Shell Stainless-steel / Ni plating Cap Synthetic resin Inner Insulator Synthetic resin Base Insulator Synthetic resin Contact Contact area: Copper alloy / Au plating over Ni Terminal area: Copper alloy / Au flash plating over Ni JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 2/12 MB-0270-1 Ordering Information ■Receptacle DD4 R A 040 J A 1 Series Modification Code R: Receptacle Plating Specification A: Contact area 0.1m Au min. A: Key Variation No. of Contacts Connection Type J: Right Angle SMT mounting ■Plug / Cradle DD4 B A 040 W A 1 Series B: Cradle P: Plug A: Key Variation No. of Contacts Modification Code Plating Specification A: Contact area 0.1m Au min. Connection Type W: Straight SMT mounting M: Right Angle SMT mounting JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 3/12 MB-0270-1 Product Drawing (Individual Product) Part Number: DD4RA40JA1 (SJ Drawing No.: SJ114484) Adsorption area *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 4/12 MB-0270-1 Product Drawing (Packaged Product) Part Number: DD4RA40JA1R1500 (SJ Drawing No.: SJ114485) Detailed drawing of area A Cross-sectional drawing of B *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 5/12 MB-0270-1 Product Drawing (Individual Product) Part Number: DD4PA40MA1 (SJ Drawing No.: SJ114486) Drawing when mated *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 6/12 MB-0270-1 Product Drawing (Packaged Product) Part Number: DD4PA40MA1R900 (SJ Drawing No.: SJ114487) Cross-sectional drawing of B Detailed drawing of area A 900 *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 7/12 MB-0270-1 Product Drawing (Individual Product) Drawing when mated. Part Number: DD4BA40WA1 (SJ Drawing No.: SJ114488) Drawing when adsorption cap is attached. *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 8/12 MB-0270-1 Product Drawing (Packaged Product) Part Number: DD4BA40WA1R400 (SJ Drawing No.: SJ114489) Cross-sectional drawing of B Detailed drawing of area A 400 *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 9/12 MB-0270-1 Part Number: DD4RA40JA1 (SJ Drawing No.: SJ114484) パターン禁止エリア Part Number: DD4PA40MA1 (SJ Drawing No.: SJ114486) *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 10/12 MB-0270-1 Part Number: DD4BA40WA1 (SJ Drawing No.: SJ114488) *Please refer to SJ drawing when considering use of this product. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 11/12 MB-0270-1 Product Drawing and Specifications Part Number Connector Shape Depth [mm] Height (when mated) [mm] Width [mm] Board Fixing Method Hold-down Screw fixed Specification Individual Drawing Product No. Packaged Product DD4RA40JA1 (R1500 ) DD4PA40MA1 (R900) DD4BA40WA1 (R400) Receptacle (6.2) 2.8 +/-0.15 29.3 +/-0.2 Plug 14.3 +/-0.3 4.05 +/-0.15 22.65 +/-0.15 Cradle 5 +/-0.15 (9.8) 31.75 +/-0.2 Four points Two points Two points Four points Two points JACS-30256-1 SJ114484 SJ114486 SJ114488 SJ114485 SJ114487 SJ114489 Notice: 1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. 2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment. 3. The products presented in this brochure are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. (1) Applications that require consultation: (i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) We may separately give you our support with a quality assurance program that you specify, when you think of a use such as : Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2882 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 12/12