DP3R020RU32JQ1

COMPONENTS PRODUCT INFORMATION NEW CONNECTOR Thunderbolt Compatible Connector MB-0248-2 July 2013 DP3 Series RoHS Compliant On-board Standard Reverse Sunk-into-the-board Straight The DP3 Series has been developed as an I/O connector compatible with Thunderbolt TM Technology for high-speed transmission between PCs and peripheral devices. *Thunderbolt is a trademark of Intel Corporation in the US and other countries. Features 10Gbps per lane high-speed transmission connector for Thunderbolt. Available in standard and reverse mounting, sunk-into-the-board, and straight mounting type. JAE has additionally developed the straight mounting type. Enhanced board mounting strength with through-hole hold-downs on the metal shell. Friction lock with the metal shell enhances cable plug retention strength and creates a clear click feeling when mated. Connector is supplied in embossed reel. General Information Rated Current: 0.5A (signal pin) No. of Contacts: 20 Contact Resistance: 100m max. Dielectric Withstanding Voltage: AC300Vr.m.s for 1 minute Insulation Resistance: 10M min. Durability: 10,000 mating cycles Operating Temperature: -20 Deg. C to +85 Deg. C JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 1/10 MB-0248-2 Materials and Finishes Component Material / Finish Contact Copper alloy / 0.3 min. Au plating over Ni (contact area) Sn plating over Ni (terminal area) Housing Glass filled LCP / None Shell Stainless steel / Ni Ordering Information (On-board, Sunk-into-board) DP3 A R 0 20 S U32 J Q 1 R**** Embossed Reel Number of pieces per reel Through-hole Terminal Length None: 1.4mm 1: 2.1 mm Plating Q: 0.3 m Au plating J: Right Angle type Distance from Mounting Surface to Center Line of Mating Interface U32: 3.2mm upward from mating surface L05: 0.5mm downward from mating surface Mounting Direction S: Standard mounting R: Reverse mounting No. of Contacts Shell Plating Specification O: Ni Plating B: Black Ni Plating Series AR: Receptacle R: Receptacle P: Plug B: Plug (without cable) (Straight) DP3 A R 0 20 W Q 1 R**** Embossed Reel Number of pieces per reel 1: Standard Product Plating Q: 0.3 m Au plating Mounting Direction W: Straight mounting No. of Contacts Series Shell Plating Specification O: Ni Plating B: Black Ni Plating AR: Receptacle JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 2/10 MB-0248-2 Part Number SJ Drawing No. DP3AR020SU32JQ1 (Individual Connector) SJ113423 DP3AR020SU32JQ1R400 (Embossed Reel) SJ113424 On-board Standard Type Unit: mm JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 3/10 MB-0248-2 Part Number SJ Drawing No. DP3R020SU32JQ (Individual Connector) SJ112287 DP3R020SU32JQR400 (Embossed Reel) SJ112331 On-board Standard Type Unit: mm JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 4/10 MB-0248-2 Part Number SJ Drawing No. DP3R020RU32JQ (Individual Connector) SJ112289 DP3R020RU32JQR400 (Embossed Reel) SJ112333 On-board Reverse Type Unit: mm JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 5/10 MB-0248-2 Part Number SJ Drawing No. DP3RB20RU05JQ (Individual Connector) SJ112304 DP3RB20RU05JQR400 (Embossed Reel) SJ112336 Sunk-into-the-board Reverse Type Unit: mm JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 6/10 MB-0248-2 Part Number SJ Drawing No. DP3R020RL30JQ (Individual Connector) SJ112303 DP3R020RL30JQR400 (Embossed Reel) SJ112335 Sunk-into-the-board Reverse Type Unit: mm JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 7/10 MB-0248-2 Part Number SJ Drawing No. DP3AR020WQ1 (Individual Connector) SJ114076 DP3AR020WQ1R400 (Embossed Reel) SJ114077 On-board Straight Type Unit: mm JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 8/10 MB-0248-2 Applicable Dimensions of Board REF: On-board, Standard Type JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. Unit: mm 9/10 MB-0248-2 Product Line-up Horizontal Receptacles Receptacle Type Mounting Orientation Height of Mating Centerline (from mounting surface) Through-hole Pin Length Part Number SJ No. Standard (top) Standard + 3.2mm 2.1mm DP3AR020SU32JQ1 SJ113423 (Individual Connector) SJ113424 (Embossed Reel) Standard (top) Standard + 3.2mm 1.4mm DP3R020SU32JQ SJ112287 (Individual Connector) SJ112331 (Embossed Reel) Reverse Reverse + 3.2mm 2.1mm DP3R020RU32JQ1 SJ112290 (Individual Connector) SJ112334 (Embossed Reel) Reverse Reverse + 3.2mm 1.4mm DP3R020RU32JQ SJ112289 (Individual Connector) SJ113424 (Embossed Reel) Mid-mount Reverse - 3.0mm 1.5mm DP3R020RL30JQ SJ112303 (Individual Connector) SJ112335 (Embossed Reel) Mid-mount Reverse + 0.5mm 1.5mm DP3RB20RU05JQ SJ112304 (Individual Connector) SJ112336 (Embossed Reel) Vertical Receptacles Receptacle Type Contact Mounting Hold-downs Height Part Number SJ No. Vertical All SMT Through-hole, 1.9mm 10.5mm DP3AR020WQ1 SJ114076 (Individual Connector) SJ114077 (Embossed Reel) * Please refer to SJ drawing when considering use of this product. Notice: 1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. 2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment. 3. The products presented in this brochure are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. (1) Applications that require consultation: (i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) We may separately give you our support with a quality assurance program that you specify, when you think of a use such as : Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2882 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd. 10/10