DX07B024XJ1R1300

版数 VER. SJ116121 9.8 年月日 D A T E 　　　　　　　　変 更 内 容 　　　　　　　　DESCRIPTION CN NO. 製　図 DR. 担　当 CHK. 査　閲 APPD. 承　認 APPD. 図面番号(DRAWING NO.) 8.4 7.2 ±0.05 A1 A 2015/06/18 2-1.6 ±0.05(NOTE 4) 0.1 X Y Z 9.65 LOT NO.(NOTE.5) 2-1.05 ±0.05 1.2 2-1.1 ±0.05 2-0.6 ±0.05 0.05 X Y Z A12 5 6 15 1 11.8 2-1.45 ±0.05(NOTE 4) 0.1 X Y Z 2 ±0.05 +0.06 2- 0.6 ±0.025 2-1.2 ±0.05(NOTE 4) 0.3 M A-B D Z 0.66 0 MOUNTING CONDITION (5 : 1) 0.7 ±0.025 (NOTE 4) 0.55 1.35 0.7 ±0.025(NOTE 4) R0.5 12- 0.6 ±0.05 6.65 ±0.1 1.15 D 0 12-0.2 ±0.05 0.1 M A-B C B 1 Z 0.95 ±0.05 Y 5.5 ±0.2 MATING BOTTOM FACE A (10 : 1) 6 (B2) 6.4 (B1) 0.91 ±0.15 12-0.3 ±0.03 0.05 X Y 5.2 (B3) 1.35 0.55 0 APPLICABLE P.C.B DIMENSION(REF.) 適合基板寸法(参考） 4 (B6) 4.4 (B5) 4.95 (B4) 12-0.12 ±0.03 0.15 M A-B D 2 A 0.8 2.94 7 0.77 (BOTTOM SURFACE OF SHELL) D 2-1.1 ±0.05 9.4 2.25 (B9) 2.8 (B8) 3.2 (B7) 0 0.8 (B12) 1.2 (B11) 2 (B10) 2.25 (B9) 2.8 (B8) 3.2 (B7) 4 (B6) 4.4 (B5) 4.95 (B4) 5.2 (B3) 6 (B2) 6.4 (B1) C 12-0.15 ±0.05 0.15 M A-B C 5.1 2.2 2 (B10) 9.4 0.875 2.17 (TOP SURFACE OF SHELL) 2.2 D 8.075 ±0.05 0 8.4 0.875 ±0.05 2-1.05 ±0.05(NOTE 4) 0.3 M A-B D 2.37 (TOP SURFACE OF BRACKET) 1.2 4-0.2 ±0.05 0.35 M A-B C 2-0.6 ±0.05 0.05 X Y Z Z 7.2 ±0.08 X 0.85 (A1) 1.35 (A2) 1.85 (A3) 2.35 (A4) 2.85 (A5) 3.35 (A6) 3.85 (A7) 4.35 (A8) 4.85 (A9) 5.35 (A10) 5.85 (A11) 6.35 (A12) B1 PCB EDGE 12-1.1 ±0.03 0.05 X Y B12 6.75 0.8 (B12) 1.2 (B11) 5 5.1 2-1.35 ±0.05 4 5.55 8 0.9 ±0.15 (BOSS)(NOTE 4) A12 6 6.9 0.9 ±0.2 (ALL T/H) A1 0.7 ±0.15 (CENTER HEIGHT) +0.06 2.54 -0.02 8.34 -0.02 2-1.95 ±0.05 0 0.875 12- 0.4 ±0.05 0.05 X Y Z 2.1 9 6.75 MATED CONDITION (5 : 1) NOTE 1.COPLANARITY OF SMT TERMINAL IS 0.1 MAX NOTE 2.RECOMMENDED METAL MASK THICKNESS:120 um NOTE 3.THE SHELL LENGTH IS LESS THAN THE MINIMUM SPECIFIED BY THE USB STANDARD. AS SUCH IT CANNOT INDEPENDENTLY BE GUARANTEED TO MEET ALL TYPE C MECHANICAL REQUIREMENTS. THE SYSTEM IMPLEMENTER IS RESPONSIBLE FOR ACHIEVING PRODUCT RELIABILITY AND PASSING USB COMPLIANCE TESTING. TABLE 1 REFERENCE THE USB TYPE C SPECIFICATION RELEASE 1.1,SECTION 3.2.1,NOTE7. NOTE 4.CONNECTOR MAY NOT BE GUIDED TO PROPER POSITION ON PCB WITH THIS LENGTH OF GUIDE POSTS AND THA SIZE OF EACH HOLE. IT MAY CAUSE MOUNTING FAILURE. NOTE 5.LOT NUMBER IS MARKED AS INDIDATED. DCF-C-213H(12.08) (EX) 5 6 15 1 0 EQUIPMENT No. (NUMBER OR ALPHABET) DAY (TWO-DIGITS NUMBER) MONTH (NUN. TO SEP.:1 TO 9, OCT.:O, NOV.:X, DEC.:Y) YEAR (END OF DIGIT AT CHRISTIAN ERA) 10 20 30 40 50 60 70 80 90 100 GND SSRXp2 SSRXn2 VBUS SUB1 Dn1 Dp1 CC1 VBUS SSTXn1 SSTXp1 GND SIGNAL NAME B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 PIN GND SSTXp2 SSTXn2 VBUS CC2 Dp2 Dn2 SUB2 VBUS SSRXn1 SSRXp1 GND SIGNAL NAME 9 REAR SHIELD 1 STAINLESS STEEL NICKEL PLATING PLATING THIKNESS:1μm Min. 8 7 6 5 4 3 2 1 BRACKET SHELL GND PLATE GND MID PLATE INSULATOR CONTACT C CONTACT B CONTACT A 1 1 2 1 1 6 6 12 STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL THERMOPLASTIC RESIN COPPER ALLOY COPPER ALLOY COPPER ALLOY NICKEL PLATING BLACK NICKEL PLATING NICKEL PLATING NICKEL PLATING COLOR:BLACK TABLE 1 TABLE 1 TABLE 1 PLATING THIKNESS:1μm Min. 符号 NO. FINISH PLATING THICKNESS GOLD FLASH NICKEL:2μm MIN. CONTACT AREA OVER PLLADIUM-NICKEL PALLADIUM-NICKEL:0.75μm MIN. OVER NICKEL GOLD FLASH:0.05μm MIN. SOLDER TALES GOLD FLASH OVER NICKEL NICKEL:2μm MIN. GOLD FLASH:0.03μm MIN. S/W 個　数 QTY. 名　　　称 DESCRIPTION 仕様書(SPECIFICATION) 第1版(ORIGINAL DATE) 16/JUN/2015 製図 DR. 一般公差(GENERAL TOLERANCE) 寸法(DIMENSION) ． ± 0.8 ． ± 0.4 ． ± 0.1 ． ± 角度(ANGLES) °± °’± 材　　料 MATERIAL 仕　上 FINISH 尺度(SCALE) M.SASAKI 承認 APPD. T.MASUMOTO DX07B024XJ1 ― HALOGEN-FREE 備　　考 REMARKS DX07 日本航空電子工業株式会社 JAPAN AVIATION ELECTRONICS INDUSTRY,LTD. 図面番号(DRAWING NO.) 質量(MASS) 単位(UNIT)：㎜ PLATING THIKNESS:1μm Min. PLATING THIKNESS:1μm Min. シリーズ(SERIES) 5:1 名称(TITLE) 担当 CHK. 査閲 APPD. PLATING THIKNESS:1μm Min. SJ116121 JAE Connector DIV. Proprietary.Copyright(C) 2015, Japan Aviation Electronics Industry, LTD. A2 3.35 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 PIN SIZE 0 0.85 (A1) 1.35 (A2) 1.85 (A3) 2.35 (A4) 2.85 (A5) 3.35 (A6) 3.85 (A7) 4.35 (A8) 4.85 (A9) 5.35 (A10) 5.85 (A11) 6.35 (A12) 6.5 max. TABLE 2. PIN DEFINE 版数 (VER.) 1