FF02S

COMPONENTS PRODUCT INFORMATION NEW 0.3mm Pitch Connector for FPC CONNECTOR MB-0146-2 July 2006 FF02S Series RoHS　Compliant Outline The FF02S　Series is a 0.3mm pitch low-profiled connector used for FPC connection with drop impact and vibration resistance responding to slim, compact information communication-related devices including mobile phones, LCDs and PDAs. Features * Compact and low-profiled connector, 0.9mm height and 3.8mm depth. * Built-in actuator cam with proprietary structure that holds FPC at all contact points and enables complete mating even for multi-contacts. * Pb-free (solder migration prevented by nickel barrier in contact) General Specifications No. of contacts : 25, 31, 33, 40, 45, 55, (15, 17, 27, 29, 35, 60, 65) Numbers shown in parentheses are planned Contact resistance: 40m ohm max. Insulation resistance: 100M ohm min. Dielectric withstanding voltage: AC250Vr.m.s per minute Applicable FPC thickness: t=0.12 +0.03,-0.03 1/8 Rated current: AC, DC 0.35A per pin, each Rated voltage: AC, DC 50V Operating temperature: -40 Deg. C to +85 Deg. C JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. MB-0146-2 Materials and Finishes Components Actuator Base insulator Contact Materials & Finishes PPS (UL94V-0, Color: Black) LCP (UL94V-0, Color: White) Copper Alloy/ Partial Au Plating over Ni Contact area: 0.1um Au min. Terminal area: 0.03um Au min. Ordering Information FF02S ** S * 1 - R3000 Series No. of pos. S: Socket Modification code Reel No. (note1) Contact plating specification 1: Partial Au plating over Ni Note1) An embossed tape reel contains 3000 pieces. Please contact us for embossed tape specifications. JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. 2/8 MB-0146-2 -Number of pos. (Odd) Note 3) Lot No. will be marked on center of connector upper surface. Product No. FF02S65SV1 FF02S55SV1 FF02S45SV1 FF02S35SV1 FF02S33SV1 FF02S31SV1 FF02S29SV1 FF02S27SV1 FF02S25SV1 FF02S17SV1 FF02S15SV1 A 22.20 19.20 16.20 13.20 12.60 12.00 11.40 10.80 10.20 7.80 7.20 B 21.31 18.31 15.31 12.31 11.71 11.11 10.51 9.91 9.31 6.91 6.31 C 19.20 16.20 13.20 10.20 9.60 9.00 8.40 7.80 7.20 4.80 4.20 D 21.24 18.24 15.24 12.24 11.64 11.04 10.44 9.84 9.24 6.84 6.24 JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. 3/8 MB-0146-2 -Number of pos. (Odd) Note 2) To improve reliability of pitch direction positioning accuracy +0.05 -0.01 is recommended for dimension D. JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. 4/8 MB-0146-2 -Number of pos. (Odd) -Number of pos. (Even) JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. 5/8 MB-0146-2 -Number of pos. (Even) Note 3) Lot No. will be marked on center of connector upper surface. Product No. FF02S60SV1 FF02S50SV1 FF02S40SV1 A 20.70 17.70 14.70 B 19.81 16.81 13.81 C 17.70 14.70 11.70 D 19.74 16.74 13.74 JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. 6/8 MB-0146-2 -Number of pos. (Even) Note 2) To improve reliability of pitch direction positioning accuracy +0.05 -0.01 is recommended for dimension D. JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. 7/8 MB-0146-2 FPC configuration (Recommended) Composition Gold Plating Nickel Plating Copper Adhesive Base Film Adhesive Electrolysis Plating Electrolysis Plating Rolled Material Thermosetting Adhesive Polyimide Thermosetting Adhesive Recommended 0.1um min. Soft type (If available) Nominal 18um max. None (Recommended) 25um 30um max. - Reinforce Plante Polyimide Specification Drawing Specification　Table Operating Manual Document No. SJ104079 (odd number) SJ104400 (even number) JACS-10293 JAHL-10293 (Note) Be sure to request specifications. Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd. 8/8