MX23A34SF2

COMPONENTS PRODUCT INFORMATION NEW Compact Type Low-profiled Waterproof Connector CONNECTOR MB-0094-2 MX23A Series June 2006 RoHS Compliant Socket Connector Pin Connector (Standard Type) Pin Connector (Reverse Type) MX23A connector can be used for wide range water proof equipment including automobiles, motorcycles and so on. This connector has high environmental capability with waterproof structure by sealing in its mating area and by grommet in its wire crimping area for full protection against water. Reverse type pin connector (with pins facing up) is also available in consideration of mounting space. Features Low profiled type with board mounting height of 18.3mm and socket connector height of 22.2mm max. Double fin structure with high reliability is adopted for socket contact and large chamfer is prepared in the front-edge side to prevent grommet from damaging. Incomplete insertion of socket contact into its housing can be detected with the front cap mounting process. Full water poof grommet is used for socket contact crimping area in order to reduce size. Water protection seal ring is used in connector’s mating area. It realizes full protection from hands touching on insulator wall. Reverse type pin connector (with pins facing up) is also available. General Specifications •Insulation Resistance: 100M ohm min. •No. of Contacts: 12 ,18, 26, 34 pos. •Life Time: 50 times (Pin side 2types: Reverse and Standard •Applicable Wire: Position of wire is specified. **excluding 12 pos.) •Contact Resistance: 10m ohm max. •Dielectric Withstanding Voltage: Cable Type AVSS, AVS (partially) AC 1000 Vr.m.s (1 minute) 0.3 to 1.25mm2 Conductive Area •Operating Temperature: -40 to+125 Deg. C #22 to #16 (Including temperature rise caused by power A.W.G No. distribution) Sheath Diameter 1.6 Dia. to 2.2 Dia. mm •Current Rating: 3A 1/7 JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. MB-0094-2 Materials and Finishes ■Socket Connector ■Pin Connector Component Material / Finish Component Material / Finish Socket Housing Glass filled PBT Pin Insulator Glass filled PBT Front Cap Glass filled PBT Pin Contact Rear Cover Glass filled PBT Copper alloy/ Sn plating Grommet Silicone rubber Seal Ring Silicone rubber Component Material / Finish Dummy Pin Glass filled PBT Socket Contact Copper alloy / Sn plating ■Socket Contact Configuration Rear Cover Grommet Socket Housing Seal Ring Front Cap Pin Insulator Pin Contact Crimp tool Hand Crimping tool Semi Automatic Applicator Contact Release jig CT160-3B-MX23 350-MX23-2 ET-MX23 2/7 JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. MB-0094-2 Outside Dimension 1. Pin Connector (Standard) 12pos. 18 pos. 26 pos. 34 pos. Ａ 30.5 38 48 58 Ｂ 16.5 24 34 44 Ｃ 26.5 34 44 54 Ｄ 12.5 20 30 40 Ｅ 23.5 31 41 51 Pitch Recommended foot-pattern for PWB ( for reference) 3/7 JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. MB-0094-2 2. Pin Connector (Reverse) 18 pos. 26 pos. 34 pos. Ａ 38 48 58 Ｂ 24 34 44 Ｃ 34 44 54 Ｄ 20 30 40 Ｅ 31 41 51 Pitch Recommended foot-pattern for PWB (for reference) 4/7 JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. MB-0094-2 3. Socket Housing 12 pos. 18 pos. 26 pos. 34 pos. D 12.5 20 30 40 F 29.1 36.6 46.6 56.6 12 pos. 18 pos. 26 pos. 34 pos. Ｄ 12.5. 20 30 40 Ｇ 21.7 28.9 38.9 48.9 Ｆ Pitch 4. Front Cap Pitch 5/7 JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. MB-0094-2 5. Dummy Pin (M120-55780) 6. Socket Contact (M23S05K351) 6/7 JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. MB-0094-2 Drawing Number Part Number MX23A12SF1 MX23A12XF1 MX23A12NF1 Drawing No. SJ100915 SJ100916 SJ100917 Note 12pos. Socket Housing 12pos. Front Cap 12pos. Standard Pinheader MX23A18SF1 MX23A18XF1 MX23A18NF1 MX23A18NF2 SJ037397 SJ037398 SJ037399 SJ037400 18pos. Socket Housing 18pos. Front Cap 18pos. Standard Pinheader 18pos. Reverse Pinheader MX23A26SF1 MX23A26XF1 MX23A26NF1 MX23A26NF2 SJ037393 SJ037394 SJ037395 SJ037396 26pos. Socket Housing 26pos. Front Cap 26pos. Standard Pinheader 26pos. Reverse Pinheader MX23A34SF1 MX23A34XF1 MX23A34NF1 MX23A34NF2 SJ037389 SJ037390 SJ037391 SJ037392 34pos. Socket Housing 34pos. Front Cap 34pos. Standard Pinheader 34pos. Reverse Pinheader M23S05K351 M120-55780 SJ036377 SJ036379 Socket Contact Dummy Pin Specification --- JACS-1728 Handling Instructions --- JAHL- 1728 Notice: Products shown in this leaflet are Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd. 7/7