MX44006SF1

COMPONENTS PRODUCT INFORMATION NEW Compact Waterproof Automotive Connectors with Low Pin Counts CONNECTOR MB-0185-1 MX44 Series June 2008 RoHS　Compliant JAE has developed the MX44 Series compact waterproof connector for automotive　 applications. It has been made more compact by adopting a structure that closely presses the rubber seals to mating surfaces. Due to the vibration absorption function of the rubber the connector has an improved vibration resistance. Moreover, each contacts is individually waterproof, making the connector suitable for use in harsh environments such as engine areas. Features •3.5 mm side pitch, 1row, compact waterproof board to wire connector •Connector size reduced by waterproof structure with tight sealing rubber in the mating area. •Vibration resistance improved by rubber absorbing unsteadiness of connector and contact. •Adopts single contact waterproof structure which makes each contact separately waterproof. •Socket contact is a box type which is strong against external force, and contact area adopts a proven double spring which is resistant to twisting. •Contacts set in position by inserting retainer from wire side. Retainer protects connector lock portion. General Specifications •No. of Contacts: 2, 4, 6 pos •Contact Resistance: 5m ohm max. (initial) 10m ohm max. (after test) •Rated Current: 3A •Insulation Resistance: 100M ohm min •Waterproof: 98 kPa min. (initial) •Vibration Proof: 30G (50 to 1000Hz) each pole/ 3 Hours •Applicable Cable: AVSS 0.3 to 0.5sq •Operating Temperature: -40 Deg. C to +125 Deg. C 1/6 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. MB-0185-1 Materials and Finishes ■　Pin Connector Component Pin Housing Pin Contact Header Seal Rubber Material/ Finish 30%GF PBT Brass/ Sn plating Silicon rubber ■　Socket Connector Component Socket Housing Material/ Finish 30%GF PBT ■　Retainer Component Retainer Material/ Finish 30%GF PBT ■　Socket Contact Component Socket Contact Material/ Finish High conductive material/ Sn plating ■　Wire Seal Component Wire Seal Material/ Finish Silicon rubber Press-Fit Tool Part Number M44S05K4F1 Hand Crimp Tool CT150-2-MX44 Semi-Automatic Applicator 3502-MX44-2 Extraction Tool ET-MX44-1 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 2/6 MB-0185-1 Drawings ■Socket Housing No. of Contacts Part Number MX44002SF1 MX44004SF1 MX44006SF1 SJ Drawing SJ107057 SJ107058 SJ107059 Dimensions A 3.5 10.5 17.5 B 9.7 16.7 23.7 2 4 6 ■　Socket Contact Part Number: M44S05K4F1 Drawing: SJ107063 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 3/6 MB-0185-1 ■Retainer No. of Contacts Part Number SJ Drawing A Dimensions B 8.2 15.2 22.2 C 8.8 15.8 22.8 2 4 6 MX44002XR1 MX44004XR1 MX44006XR1 SJ107060 SJ107061 SJ107062 3.5 10.5 17.5 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 4/6 MB-0185-1 ■　Angle Pin Header No. of Contacts Part Number SJ Drawing A Dimensions B 8.2 14.7 21.7 C 10.5 17.0 24.0 D 14.3 20.8 27.8 2 4 6 MX44002NF1 MX44004NF1 MX44006NF1 SJ107054 SJ107055 SJ107056 3.5 10.5 17.5 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 5/6 MB-0185-1 ■ Wire seal Part Number MX44000XP1 MX44000XP2 SJ Drawing SJ107064 SJ107065 Applicable Wire AVSS0.3sq AVSS0.5sq Applicable Wire Insulation Outer Diameter 1.4 dia. to 1.5 dia. 1.6 dia. to 1.7 dia. Others Specification Specification Handling Instructions Handling Instructions JACS-10389 Notice: Products shown in this leaflet are JAHL-10389 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 6/6