MX50019NQ1

COMPONENTS PRODUCT INFORMATION NEW RoHS Compliant Automotive HDMI CONNECTOR MB-0242-2 MX50/53 Series Receptacle Connector (Type E) MX50019NQ1 Plug Connector (Type E) MX50019FQ1 Inline Connector (Straight Type) (Type A) MX53019MB1 August 2016 Inline Connector (Angle Type) (Type A) MX53B19MB1 Recently for car interiors, the demand for infotainment devices such as blu-ray players and connectivity with digital portable devices like smartphones has been increasing. To meet this demand, JAE has developed the MX50/53 Series HDMI connector for automotive applications, and now a new Type A Inline Connector (Angle Type) has been added to enhance the line-up. The MX50/53 Series is a connector compatible with the HDMI standard Type E which was standardized for automotive applications. The connector is designed to satisfy highspeed transmission performance while taking into account automotive use requirements, and it achieves both mechanical and environment suitability through features such as exclusively developed shielded wires. **HDMI: High-Definition Multimedia Interface, trademark of HDMI Licensing, LLC. Features - 1.5mm horizontal pitch, 2-row, 19 position. (Type E) - Impedance matching design, compatible with high-speed transmission. - Mechanical lock to resist twisting in the mated connector. (Type E) - HDMI Type A inline product is also available. - Supplied as a harness product to ensure transmission performance reliability. General Specifications •Number of Contacts: 19 position •Contact Resistance: Contact area, 30mmax.; Shell area, 50mmax. (amount of change from initial) •Rated Voltage: AC500V (un-mated) •Operating Temperature: -40 Deg. C to +85 Deg. C •Rated Current: 0.5A per terminal •Insulation Resistance: 100Mmin. (un-mated) •Applicable Board Thickness: 1.6mm •Applicable Wire: Shielded twist pair wire (only for harness) JAE PMK Div. Proprietary. Copyright © 2016, Japan Aviation Electronics Industry, Ltd. 1/7 MB-0242-2 Materials and Finishes ■ Receptacle Connector Component Material / Finish Pin Contact Brass / Contact area: Au plating Terminal area: Sn plating Housing 30%GF SPS, other Shell Copper alloy / Sn plating, other ■ Plug Connector Component Material / Finish Socket Contact Copper alloy / Contact area: Au plating Terminal area: Sn plating Housing PBT, other Shell Copper alloy / Sn plating, other ■ Type A Inline Connector (common for Straight and Angle Type) Component Material / Finish Pin Contact Brass / Au plating Housing PBT, other Shell Copper alloy / Sn plating, other JAE PMK Div. Proprietary. Copyright © 2016, Japan Aviation Electronics Industry, Ltd. 2/7 MB-0242-2 External Dimensions ■ Receptacle Connector (MX50019NQ1) Drawing No. SJ109697 (Type E) Unit: mm PANEL CUT OUT DIMENSION （REF.) パネル開口寸法 （参考） Note) Please contact us concerning the attachment method to the flange, whether the products are with or without flange, and the position of the flange. CONNECTOR CONTIGUOUS AREA コネクタ接地面 P.C.B THICKNESS 基板厚 P.C.B LAYOUT(REF.) 基板取付寸法(参考) JAE PMK Div. Proprietary. Copyright © 2016, Japan Aviation Electronics Industry, Ltd. t1.6 3/7 MB-0242-2 External Dimensions ■ Plug Connector (MX50019FQ1) (for reference) (Type E) Unit: mm Note： Plug Connector is a harness product. It is not sold as an individual connector. JAE PMK Div. Proprietary. Copyright © 2016, Japan Aviation Electronics Industry, Ltd. 4/7 MB-0242-2 External Dimensions ■ Inline Connector: Straight Type (MX53019MB1) (for reference) (Type A) Unit: mm Note： Type A Inline Connector (Straight Type) is a harness product. It is not sold as an individual connector. JAE PMK Div. Proprietary. Copyright © 2016, Japan Aviation Electronics Industry, Ltd. 5/7 MB-0242-2 External Dimensions ■ Inline Connector: Angle Type (MX53B19MB) (for reference) (Type A) Unit: mm Note： Type A Inline Connector (Angle Type) is a harness product. It is not sold as an individual connector. JAE PMK Div. Proprietary. Copyright © 2016, Japan Aviation Electronics Industry, Ltd. 6/7 MB-0242-2 Other Specifications JACS-10628 (Type E Connector) JACS-10660 (Type A Inline Connector) Notice: 1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice. Contact our sales staff for further information before considering or ordering any of our products. For purchase, a product specification must be agreed upon. 2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the suitability of JAE's products to the equipment. 3. The products presented in this brochure are designed for the uses recommended below. We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended applications or for a specific use that requires an extremely high reliability. (1) Applications that require consultation: (i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry, such as: Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) We may separately give you our support with a quality assurance program that you specify, when you think of a use such as : Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) Recommended applications include: Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home electric appliances, factory automation equipment, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2016, Japan Aviation Electronics Industry, Ltd. 7/7