MX7-A-30SC

MX7 SERIES CONNECTORS 025 Crimp Contacts, PCB-to-Cable Connectors • • • • • • • • • • • • • • GENERAL SPECIFICATIONS Number of Contacts Current Rating Pin: 35, 48, 93, 109, 119 Socket: 20, 26, 28, 30, 35 Signal: 2.3mm (.091") Power: 3.0mm (.118") Signal: 5 Amps, Power: 7 Amps Dielectric Withstanding Voltage 1000 VAC r.m.s. (for one minute) Contact Spacing Insulation Resistance 100 megohms min. Contact Resistance 3 milliohms max. Applicable PCB Thickness 1.6mm (.063") Operating Temperature -40°C to +85°C Applicable Wire (Stranded) FEATURES Contact Type • Signal contacts (5 Amps) and Power contacts (7 Amps) are housed in the same connector • Mechanical lock assures positive mating • Double locking mechanism prevents contact from dislodging Wire Type JIS Conductor Cross Section Area AWG Insulation Outer Diameter • Several wire terminated sockets are coupled with a pin header mounted on a board Connector Profile (Ref.) Insulator Locator Retainer AVS, AVSS 0.3~0.85mm2 #22-#18 0.5~1.25mm2 #20-#16 ø1.4~ø2.1mm (ø.055~ø.083") ø1.6~ø2.6mm (ø.063~ø.102") Materials/Finishes Glass-filled PBT (Dark Gray) Socket PBT (Dark Gray) Locator Glass-filled PBT (Dark Gray) Pin Contact High Conductive Copper Alloy/Tin Plating or Gold (Connecting points) High Conductive Copper Alloy/Tin Plating or Gold (Connecting points) with Solder (SnPb terminal area) Plating over Nickel Glass-filled PBT (20 Position: White, 26/35 Position: Light Blue, 28 Position: Orange, 30 Position: Green Retainer Signal 0.3~0.5mm2 #22-#20 AVSS Insulator Socket Contact Power AVS Power MATERIALS AND FINISHES Description • Designed for Engine Control Unit Signal Note 1: Insert the number of gold plated contact for Power and Signal contacts P*The Number of Power Contacts S*The Number of Signal Contacts • The above shows the general group of products. Please contact JAE Customer Service when placing an order. 41.8 (1.646) • Suggested screws: M3 tapping screws (2 or 4 grade) per JIS B1115, 1122 or 1123 28.6 (1.126) 22.2 (.874) • Drawing shown is for 35 positions. The stacking design varies according to the number the positions. Dimensions and specifications subjectDimensions to change without notice. in mm (inches). MX7 SERIES CONNECTORS 025 Crimp Contacts, PCB-to-Cable Connectors RIGHT ANGLE PIN HEADER t 0.64 (.025) x w 0.64 (.025) 3.5 (.138) 4 (.157) ± 0.5 (.020) 3.5 (.138) ± 0.3 (.012) 8.5 (.335) B ± 0.5 (.020) ± 0.3 (.012) 6.1 (.240) ± 0.3 (.012) 109 Position 10.6 (.417) ± 0.3 (.012) 15.1 (.595) ± 0.3 (.012) No. of Contacts Part Number 93 109 119 MX7- 93PL-P*S* MX7- 109PL-P*S* MX7- 119PL-P*S* (Note 1) Contact Position Signal Power 75 79 95 18 30 24 A ±0.5 (.02) 109 (4.29) 130.2 (5.13) 137.9 (5.43) B ±0.5 (.02) 100.8 (3.97) 123.6 (4.87) 131.3 (5.17) Note 1: Insert the number of gold plated contact for Power and Signal contacts P*The Number of Power Contacts S*The Number of Signal Contacts Dimensions in mm (inches). ± 0.5 (.020) 13.1 (.516) ± 0.5 (.020) ± 0.5 (.020) ± 0.3 (.012) ± 0.2 (.008) 10.2 (.402) 5.1 (.201) ± 0.2 (.008) 19 (.748) ± 0.3 (.012) 22 (.866) A ± 0.5 (.020) 2.08 (.082) 2.2 (.087) DIA. MX7 SERIES CONNECTORS 025 Crimp Contacts, PCB-to-Cable Connectors 93 Position PCB Layout (Ref.) Suggested Screws: JIS B 1115, 1122, 1123 M3 x 6 tapping screw (2 or 4 grade) 101 (3.976) ± 0.1 (.004) 53.2 (2.095) (pitch) (pitch) (pitch) + 0.1 (.004) 0 ± 0.05 (.002) ± 0.05 (.002) 15.1 (.595) ± 0.05 (.002) 10.6 (.417) ± 0.05 (.002) 6.1 (.240) 2.3 (.091) ± 0.05 (.002) 2.3 (.091) ± 0.05 (.002) 1 (.039) 93 HOLE DIA. ± 0.1 (.004) 2.3 (.091) 109 Position 3.2 (.126) 3 HOLE DIA. ± 0.1 (.004) 123.8 (4.874) ± 0.1 (.004) ± 0.05 (.002) 80.6 (3.173) ± 0.1 (.004) ± 0.1 (.004) ± 0.1 (.004) 33.3 (1.311) 26.4 (1.039) 28.7 (1.130) ± 0.1 (.004) ± 0.1 (.004) ± 0.1 (.004) 100.8 (3.969) ± 0.1 (.004) (pitch) ± 0.1 (.004) 65.7 (2.587) ± 0.1 (.004) (0.1 (.004)) 2.3 (.091) ± 0.05 (.002) 36.5 (1.437) 2.3 (.091) 2.3 (.091) 2.3 (.091) ± 0.05 (.002) ± 0.05 (.002) ± 0.05 (.002) (pitch) (pitch) (pitch) 1 (.039) 109 HOLE DIA. + 0.1 (.004) 0 (0.1 (.004)) ± 0.05 (.002) ± 0.1 (.004) ± 0.05 (.002) 23 (.906) 15.1 (.595) 20.7 (.815) 10.6 (.417) 27.6 (1.087) 6.1 (.240) 3 (.118) ± 0.05 (.002) ± 0.05 (.002) 3 (.118) ± 0.05 (.002) PCB Layout (Ref.) 15 (.591) 3 (.118) MAX. 3.2 (.126) DIA. ± 0.1 (.004) 3 (.118) ± 0.05 (.002) 3 (.118) 3 (.118) ± 0.05 (.002) 27.6 (1.087) ± 0.1 (.004) 3 (.118) 3 (.118) ± 0.05 (.002) ± 0.05 (.002) ± 0.05 (.002) 20.7 (.815) 9.2 (.362) ± 0.1 (.004) 33.3 (1.311) 24.1 (.949) ± 0.1 (.004) ± 0.1 (.004) 63.8 (2.512) ± 0.1 (.004) 15 (.591) MAX. ± 0.1 (.004) 20.7 (.815) ± 0.1 (.004) 20.6 (.811) 26.4 (1.039) ± 0.1 (.004) ± 0.1 (.004) 14.9 (.587) ± 0.1 (.004) 90.8 (3.575) ± 0.1 (.004) 123.6 (4.866) ± 0.1 (.004) (0.1 (.004)) 119 Position (0.1 (.004)) PCB Layout (Ref.) 131.5 (5.177) ± 0.1 (.004) 83.7 (3.295) ± 0.1 (.004) 2.3 (.091) ± 0.05 (.002) (pitch) ± 0.05 (.002) ± 0.05 (.002) (pitch) (pitch) (pitch) + 0.1 (.004) 0 ± 0.05 (.002) ± 0.05 (.002) 1 (.039) DIA. 15.1 (.595) 2.3 (.091) ± 0.05 (.002) 2.3 (.091) 10.6 (.417) 2.3 (.091) 6.1 (.240) ± 0.1 (.004) ± 0.05 (.002) 36.5 (1.437) 3.2 (.126) 4 HOLE DIA. ± 0.1 (.004) 3 (.118) 3 (.118) 3 (.118) 3 (.118) ± 0.05 (.002) ± 0.05 (.002) ± 0.05 (.002) ± 0.05 (.002) 27.6 (1.087) 18.4 (.724) 20.7 (.815) 23 (.906) ± 0.1 (.004) ± 0.1 (.004) ± 0.1 (.004) ± 0.1 (.004) 33.3 (1.311) 24.1 (.949) 26.4 (1.039) 28.7 (1.130) ± 0.1 (.004) ± 0.1 (.004) ± 0.1 (.004) ± 0.1 (.004) 15 (.591) MAX. 63.8 (2.512) ± 0.1 (.004) 96.2 (3.787) ± 0.1 (.004) (0.1 (.004)) 131.3 (5.169) ± 0.1 (.004) (0.1 (.004)) Dimensions in mm (inches). MX7 SERIES CONNECTORS 025 Crimp Contacts, PCB-to-Cable Connectors 22 (.866) 15 (.591) ± 0.5 (.020) (19.7 (.776)) ± 0.2 (.008) 10.2 (.402) ± 0.2 (.008) C ± 0.25 (.010) 5.1 (.201) + 0.09 (.004) B - 0.3 (.012) ± 0.2 (.008) ± 0.5 (.020) 1.98 (.078) + 0.09 (.004) - 0.3 (.012) 15.4 (.606) A ± 0.5 (.020) ± 0.5 (.020) 17.1 (.673) SOCKET HOUSING 35 Position No. of Contacts Contact Position Signal Part Number Power A ±0.5 (.02) B +0.09 (0.004) -0.3 (0.012) C ±0.25 (.010) Retainer 20 8 12 MX7-A-20SC 27.2 (1.07) 24.6 (0.97) 20.6 (0.81) MX7-A-20S-RT 26 28 30 35 20 22 24 29 6 6 6 6 MX7-A-26SC MX7-A-28SC MX7-A-30SC MX7-A-35SC 30.3 (1.19) 32.6 (1.28) 34.9 (1.37) 39.5 (1.56) 27.7 30 32.3 36.9 24.1 (0.95) 26.4 (1.04) 28.7 (1.13) 33.3 (1.31) MX7-A-26S-RT MX7-A-28S-RT MX7-A-30S-RT MX7-A-35S-RT (1.09) (1.18) (1.27) (1.45) Dimensions in mm (inches). MX7 SERIES CONNECTORS 025 Crimp Contacts, PCB-to-Cable Connectors Socket Housing Right Angle Pin Header No. of Positions Part Number No. of Positions Part Number Signal Power MX7-93PL-P*S* (Signal: 75 Contacts, Power: 18 Contacts) 28 MX7-A-28SC 22 6 30 MX7-A-30SC 24 6 35 MX7-A-35SC 29 6 20 MX7-A-20SC 8 12 26 MX7-A-26SC 20 6 28 MX7-A-28SC 22 6 35 MX7-A-35SC 29 6 26 MX7-A-26SC 20 6 28 MX7-A-28SC 22 6 30 MX7-A-30SC 24 6 35 MX7-A-35SC 29 6 93 MX7-109PL-P*S* (Signal: 79 Contacts, Power: 30 Contacts) 109 MX7-119PL-P*S* (Signal: 95 Contacts, Power: 24 Contacts) 119 Note 1: Insert the number of gold plated contact for Power and Signal contacts P*The Number of Power Contacts S*The Number of Signal Contacts • Signal Contact (5A) • Power Contact (7A) 19.3 (.760) ± 0.5 (.020) 18.8 (.740) ± 0.5 (.020) 12.8 (.504) 12.8 (.504) 5.3 (.209) 3 (.118) 1.4 (.055) 5.8 (.228) 2.3 (.091) 3.5 (.138) 1.3 (.051) 1.3 (.051) 2.25 (.089) Type Part Number (Note 1) MX7-SGC3-7000 2.9 (.114) Finish (Note 2) a Signal Power MX7-SGC3-1-7000 b MX7-PWC2-4500 a 2.9 (.114) 2.25 (.089) Applicable Tool Applicable Wire Stranded Type AWG Conductor Cross Section Insulation Outer Dia. AVS #22~#20 0.3~0.5mm2 (.011~.020) AVSS #22~#18 0.3~0.85mm2 (.011~.033) AVS #22~#20 0.3~0.5mm2 (.011~.020) AVSS #22~#18 0.3~0.85mm2 (.011~.033) AVS AVSS #20~#16 0.5~1.25mm2 (.020~.049) Hand Crimp Semi-Auto (CT350-2 Type) ø 1.4~ø 2.1mm (ø .055~ø .083) CT160-3-MX73 Applicator: 350-MX73-2 Press: CP210-1B ø 1.6~ø 2.6mm (ø .063~ø .102) CT160-3-MX72 Applicator: 350-MX72-2 Press: CP210-1B Note 1: The figures following the Part Number (-7000, -4500) indicate the Number of contacts per magazine assembly reel. Note 2: Contact Finishes/a-Tin Plating, b-Gold Plating (connecting area) with Solder (SnPb, terminal area) Plating over Nickel. Dimensions in mm (inches).