ST5S014V4AR800

COMPONENTS PRODUCT INFORMATION NEW microSDTM Memory Card and SIM Card Combo Connector ST5 Series CONNECTOR MB-0167-1 March 2007 RoHS Compliant < Outline > The ST5 Series are combo connectors with one-piece type external connectors for micro SDTM card and GSM11.11 standard compatible Plug in SIM card. * microSDTM is a trademark of SD Card Association. Features Combo connector compatible with slide type GSM11.11 standard Plug-in SIM card and reverse mounting push-push structure microSD TM, standardized by the SDATM. With 1mm push stroke and 3.3mm card eject length. With card half lock structure With a countermeasure to prevent the card from popping out. Card insertion detection structure (D-SW), Normally open Shield characteristic is secured by the 4 ground connection points. Slim design with 2.8mm height, 17.35mm depth and 19.2mm width (depth including card: 19.2mm x 26mm) Supply for automatic mounting in embossed tape (Compatible to second reflow) General Specifications No. of contacts :14 pos.+2pos. (D-SW) Contact resistance: 100m ohm max. Dielectric withstanding voltage : AC500Vr.m.s. per minute Operating temperature: -25 Deg. C to +85 Deg. C Storage temperature: -10 Deg. C to +60 Deg. C Rated current: 0.5A/ per pin Rated voltage: 10V/ per pin Insulation resistance: 1000M ohm min. Lifetime: 5,000/ 10,000 times Temperature rise: 30 Deg. C rise max. JAE PMK Div. Proprietary. Copyright © 2007 Japan Aviation Electronics Industry, Ltd. 1/4 MB-0167-1 Materials and Finishes Components Signal contact (microSD, SIM Materials /Finishes Copper Alloy/ Contact: 0.5um min. Au plating over Ni in common) Terminal: Au flash plating over Ni Housing Cover frame Synthetic resin/ No (UL94V-0) Stainless steel/ terminal area: Au flash plating over Ni Eject bar Synthetic resin/ No (UL94V-0) Spring Stainless steel/ None D-SW contact Plating: Compliant to finish of signal contact Lock Stainless steel/ None Cam follower Stainless steel/ None Ordering Information ST5 S 014 V Series Connector type S: Non-ZIF structure 4 A (R800) Reel part number (Note) A: Modification code 4: Au 0.5 um/ Au flash plating No. of contacts V: SMT mounting with H/D JAE PMK Div. Proprietary. Copyright © 2007 Japan Aviation Electronics Industry, Ltd. 2/4 MB-0167-1 Part Number SJ Drawing ST5S014V4A SJ107381 Unit: mm JAE PMK Div. Proprietary. Copyright © 2007 Japan Aviation Electronics Industry, Ltd. 3/4 MB-0167-1 Unit: mm Applicable board dimensions (for reference) Note) An embossed tape reel contains 800 pcs. Please contact us for details on embossed tape specifications. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), AV devices, household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2007 Japan Aviation Electronics Industry, Ltd. 4/4