ST7S014V4BR800

COMPONENTS PRODUCT INFORMATION NEW microSDTM Memory Card and SIM Card Combo Connector ST7 Series CONNECTOR MB-0188-1 September 2008 RoHS Compliant The ST7 Series is a combo connector that simultaneously accepts a micro SD TM card in a push-push slot, and a GSM11.11 standard compatible Plug-in SIM card. * microSDTM is a trademark of SD Card Association. Features Combo connector compatible with slide-type GSM11.11 standard Plug-in SIM card, and reverse-mounting push-push structure compatible with the microSD TM card standardized by the SDATM 0.8mm push stroke and 3.3mm card eject length Card half lock structure Countermeasure to prevent the card from popping out Card insertion detection structure (D-SW), Normally open: micro SDTM and SIM card Shield feature is secured by 4 ground connection points Slim design with 3.2mm height, 17.8mm width, and 20.5mm depth (depth including card: 27.25mm) Supply for automatic mounting in embossed tape (Compatible with second reflow) General Specifications No. of contacts :14 pos.+2pos. (D-SW) Contact resistance: 100m ohm max. Dielectric withstanding voltage : AC500Vr.m.s. per minute Operating temperature: -25 Deg. C to +85 Deg. C Storage temperature: -10 Deg. C to +60 Deg. C Rated current: 0.5A/ per pin Rated voltage: 10V/ per pin Insulation resistance: 1000M ohm min. Lifetime: Plug-in SIM: 5,000 times micro SDTM: 10,000 times Temperature rise: 30 Deg. C rise max. JAE PMK Div. Proprietary. Copyright © 2008 Japan Aviation Electronics Industry, Ltd. 1/4 MB-0188-1 Materials and Finishes Components Signal contact (microSD, SIM Material /Finish Copper Alloy/ Contact: 0.5um min. Au plating over Ni in common) Terminal: Au flash plating over Ni Housing Cover frame Synthetic resin/ No (UL94V-0) Stainless steel/ terminal area: Au flash plating over Ni Eject bar Synthetic resin/ No (UL94V-0) Spring Stainless steel/ None D-SW contact Plating: Compliant to finish of signal contact Lock Stainless steel/ None Cam follower Stainless steel/ None Ordering Information ST7 S 014 V Series Connector type S: Non-ZIF structure 4 B (R800) Reel part number (Note) B: Modification code 4: Au 0.5 um/ Au flash plating No. of contacts V: SMT mounting with H/D JAE PMK Div. Proprietary. Copyright © 2008 Japan Aviation Electronics Industry, Ltd. 2/4 MB-0188-1 Part Number SJ Drawing ST7S014V4B SJ108850 Unit: mm TABLE1 Circuit [Detection Switch] JAE PMK Div. Proprietary. Copyright © 2008 Japan Aviation Electronics Industry, Ltd. 3/4 MB-0188-1 Unit: mm Applicable board dimensions (for reference) Note) An embossed tape reel contains 800 pcs. Please contact us for details on embossed tape specifications. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), AV devices, household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2008 Japan Aviation Electronics Industry, Ltd. 4/4