WP6-S020VA2-R6000

COMPONENTS PRODUCT INFORMATION NEW 0.4mm Pitch, Stacking Type Board-to-Board Connector WP6 Series CONNECTOR MB-0230-2 March 2014 RoHS Compliant Plug Receptacle The WP6 Series is a low-profile stacking type board-to-board (FPC) connector with 0.4mm pitch spacing that is ideal for high-density mounting in slim information communication devices like mobile phones, smartphones, and notebook PC. To satisfy different product function requirements, plug and receptacle with different heights (mating height: 0.6mm, 0.8mm) are available with the same mounting pattern. Features • 0.4mm pitch, 2 rows, stacking height 0.6mm and 0.8mm. • Contact structure ensures high wear-resistance and high contact reliability. • Secure hold-downs prevent insulator breakage and peeling from FPC. • 2-point contact design to resist twisting stress. • Pb-free. Ni barrier on contact prevents solder wicking. * Inspection jig connector for both plug and receptacle are available. (Note 1) General Specifications No. of Contacts: 10 to 80 pos. (Please refer to Development Status on the last page regarding development of contacts.) Pitch: 0.4mm, 2 rows Operating Temperature: -40 Deg. C to +85 Deg. C Contact Resistance: 70m max (initial) Life Time: 30 mating cycles Rated Current: AC, DC 0.3A each per terminal Rated Voltage: AC, DC 50V Insulation Resistance: 100M min. (initial) Dielectric Withstanding Voltage: AC250Vr.m.s for 1 minute Total Insertion Force: 1.5N x n max. (n: No. of pos.) Total Extraction Force: 0.1N x n min. (n: No. of pos.) Less than 20 pos. Total Insertion Force: 2.5N x n max. (n: No. of pos.) Less than 20 pos. Total Extraction Force: 0.2N x n min. (n: No. of pos.) Note 1) Please contact us for specifications of inspection jig connector. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 1/8 MB-0230-2 Materials and Finishes Component Material / Finish Contact Contact area: Cu alloy / Au plating (0.1 µm min.) Mounting area: Cu alloy / Au plating (0.05 µm min.) Insulator Heat-resistant plastic Hold-Down Plug: Cu alloy / Au plating (0.1µm min.) Receptacle: Cu alloy / Sn plating Ordering Information (Plug) WP6 - P *** V A * - R**** Series Contact Shape P: Plug No. of Contacts Reeled Part Number (Note 1) R6000: For Standard Product R300: For Inspection Jig Product Modification Code 1: Height 0.6mm, Standard Product 2: Height 0.8mm, Standard Product E: Height 0.6mm, Inspection Jig Product E2: Height 0.8mm, Inspection Jig Product Connection Type V: Stacking Finish A: Au plating Ordering Information (Receptacle) WP6 - S *** V A * - R**** Series Contact Shape S: Receptacle No. of Contacts Reeled Part Number (Note 1) R6000: For Standard Product R300: For Inspection Jig Product Modification Code 1: Height 0.6mm, Standard Product 2: Height 0.8mm, Standard Product E: Height 0.6mm, Inspection Jig Product E2: Height 0.8mm, Inspection Jig Product Connection Type V: Stacking Finish A: Au plating Note 1) An embossed tape reel contains 6,000 pieces of standard product, or 300 pieces of inspection jig product. Please contact us for details on embossed tape specifications. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 2/8 MB-0230-2 Part Number WP6-P***VA1 SJ Drawing SJ111683 Note 1) Dimension 3 WP6 (Height 0.6mm) Plug 0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 3/8 MB-0230-2 Part Number WP6-S***VA1 SJ Drawing SJ111684 Note 1) Dimension 3.9 WP6 (Height 0.6mm) Receptacle 0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 4/8 MB-0230-2 Part Number WP6-P***VA2 SJ Drawing SJ111687 Note 1) Dimension 3 WP6 (Height 0.8mm) Plug 0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 5/8 MB-0230-2 Part Number WP6-S***VA2 SJ Drawing SJ111688 Note 1) Dimension 3.9 WP6 (Height 0.8mm) Receptacle 0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 6/8 MB-0230-2 Technical Documents Series WP6 Drawing No. (Plug, Height 0.6mm) Individual Product: SJ111683 Embossed Reel: SJ111685 Drawing No. (Receptacle, Height 0.6mm) Individual Product: SJ111684 Embossed Reel: SJ111686 Drawing No. (Plug, Height 0.8mm) Individual Product: SJ111687 Embossed Reel: SJ111689 Drawing No. (Receptacle, Height 0.8mm) Individual Product: SJ111688 Embossed Reel: SJ111690 Specification JACS-10797 Handling Instruction JAHL-10798 Summary Report SR-C-1002 JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 7/8 MB-0230-2 Development Status No. of Contacts 10 Height 0.6mm Samples available Height 0.8mm Now in mass-production Now in mass-production 12 14 Now in mass-production 16 Samples available Now in mass-production 20 Samples available Now in mass-production 24 Now in mass-production Now in mass-production 26 Samples available 30 Samples available 34 Samples available 40 Samples available Samples available 50 Samples available Now in mass-production 60 Now in mass-production Samples available 80 Samples available Samples available Now in mass-production Notice: Products shown in this brochure are Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd. 8/8