COMPONENTS PRODUCT INFORMATION
0.4mm Pitch, Stacking Type
Board-to-board Connector
NEW
WP6C Series
CONNECTOR
MB-0277-1
March 2014
RoHS Compliant
Plug
Receptacle
The WP6C Series is a low-profile stacking type board-to-board (FPC) connector with
0.4mm pitch spacing that is ideal for high-density mounting in slim information
communication devices like mobile phones, smartphones, LCD, and notebook PC.
The WP6C Series has a shield structure that reduces noise during mating with a secure
ground connection with its exclusive terminals on the four corners and with a shield
equipped on the rear side of receptacle .
Also, the mounting pattern of the WP6C Series are the same as the existing WP6 Series.
Both types with and without shield are available.
Features
■ 0.4mm pitch, 2 rows, stacking height 0.8mm.
■ Contact structure ensures high wear-resistance and high contact reliability.
■ Secure hold-downs prevent insulator breakage and peeling from FPC.
■ 2-point contact design to resist twisting stress.
■ Enhanced ground connection during mating, and shield structure with anti-noise measure.
■ Pb-free. Ni barrier on contact prevents solder wicking.
* The mounting pattern is the same as the existing WP6 Series. (Not mateable)
General Specifications
■No. of Contacts: 24, 30
■Pitch: 0.4mm, 2 rows
■Operating Temperature:
-40 Deg. C ~ +85 Deg. C
■Contact Resistance: 70mΩ max. (initial)
■Durability: 30 times
■Rated Current: AC, DC each 0.3A / per 1 pos.
■Rated Voltage: AC, DC 50V
■Insulation Resistance: 100MΩ min. (initial)
■Dielectric Withstanding Voltage:
AC250Vr.m.s., for 1 minute
■Total Insertion Force: 1.5N x n max. (n: No. of pos.)
■Total Extraction Force: 0.15N x n min. (n: No. of pos.)
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
1/5
MB-0277-1
Materials and Finishes
Component
Material and Finish
Contact
(Contacting area) Copper alloy / Au plating (0.1μm min.)
(Mounting area) Copper alloy / Au plating (0.05μm min.)
Insulator
Heat Resistant Plastic
Ground Contact
Plug Side: Copper alloy / Au flash plating
Shell
Receptacle Side: Copper alloy / Au flash plating
Ordering Information (Plug)
WP6 C
‐P
＊＊＊ V A ＊‐R＊＊＊＊
Series
Reel Part Number (Note 1)
(R6000: Standard Package)
Modification Code
Contact Shape P: Plug Side
Modification Code
No. of Contacts
Finish A: Au plating
Connection Type V: Stacking Type
Ordering Information (Receptacle)
WP6 C ‐ S ＊＊＊ V A ＊‐R＊＊＊＊
Series
Reel Part Number (Note 1)
(R6000: Standard Package)
Modification Code
Contact Shape S: Receptacle
No. of Contacts
Modification Code
Finish A: Au plating
Connection Type V: Stacking Type
Note 1) An embossed tape reel contains 6,000 pieces of standard product.
Please contact us for details on embossed tape specifications.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
2/5
MB-0277-1
Part Number
WP6C-P***VA1
SJ Drawing
SJ112897
WP6C Plug
DIMENSIONS
寸法
NUMBER
OF CONTACT
芯数
A
B
C
24
4.4
6.35
2.0
30
5.6
7.55
2.0
Note 1) Dimension 3.9±0.05 is recommended in case repair is needed.
Note 2) This product is grand contact.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
3/5
MB-0277-1
Part Number
WP6C-S***VA1
SJ Drawing
SJ112899
Note 1) Dimension 3.9±0.05 is recommended
in case repair is needed.
WP6C Receptacle
DIMENSIONS
寸法
NUMBER
OF CONTACT
芯数
A
B
C
D
E
24
30
4.4
5.6
7.7
8.9
5.64
6.84
2.0
2.0
5.2
6.4
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
4/5
MB-0277-1
Technical Documents
Series
WP6C
SJ Drawing
(Plug)
Individual Product: SJ112897
Embossed Reel: J112898
SJ Drawing
(Receptacle)
Individual Product: SJ112899
Embossed Reel: SJ112900
Specification
JACS-10987
Handling Instruction
JAHL-10987
Summary Report
SR-C-1266
Notice:
1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
For purchase, a product specification must be agreed upon.
2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the
suitability of JAE's products to the equipment.
3. The products presented in this brochure are designed for the uses recommended below.
We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended
applications or for a specific use that requires an extremely high reliability.
(1) Applications that require consultation:
(i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry,
such as:
Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion
control, fire prevention or security systems, disaster prevention equipment, etc.
(ii) We may separately give you our support with a quality assurance program that
you specify, when you think of a use such as :
Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc.
(2) Recommended applications include:
Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home
electric appliances, factory automation equipment, etc
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2882 FAX: +81-3-3780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
5/5
