O20.0-JCO14-3-G-3.3V-T1

Oscillator · JCO · 3.3 V Pin Type Oscillator actual size ■ soldering temperature: 260 °C max. ■ metal package 2002/95/EC RoHS compliant Pb free: pins / pads RoHS General Data type frequency range JCO8 / JCO14 3.3 V 1.0 ~ 160.0 MHz (15pF max.) 1.0 ~ 50.00 MHz (15pF~30pF max.) frequency stability over all current consumption supply voltage VDC temperature operating storage output rise & fall time load max current max. low level max. high level min. output enable time max. output disable time max. start-up time max. standby function phase jitter 12 kHz ~ 20.0 MHz symmetry at 0.5 x VDC ± 15ppm ~ ± 100ppm (table 1) see table 2 3.3 V ± 10% -10 °C ~ +70 °C / -40 °C ~ +85 °C -55 °C ~ +125 °C see table 3 15pF / 30pF 8mA +0.5 V VDC -0.5 V 10ms 100ns 10ms optional < 1.0ps RMS 45% ~ 55% typ. (40% ~ 60% max.) Table 1: Frequency Stability Code stability code A ± 100 ppm -10 °C ~ +70 °C -40 °C ~ +85 °C O B ± 50 ppm G ± 30 ppm O O C ± 25 ppm O O D ± 20 ppm O E ± 15 ppm O • • O on request • O standard Table 2: Current Consumption max. Current at 15pF load: 1.0 ~ 29.9 MHz 30.0 ~ 49.9 MHz 50.0 ~ 89.9 MHz 90.0 ~ 124.9 MHz 125.0 ~ 160.0 MHz 10 mA 15 mA 30 mA 45 mA 60 mA Current at 30pF load: 1.0 ~ 29.9 MHz 30.0 ~ 50.0 MHz 20 mA 35 mA Table 3: Rise & Fall Time max. 6.0 ns: 1.0 ~ 49.9 MHz 5.0 ns: 50.0 ~ 79.9 MHz 4.0 ns: 80.0 ~ 99.9 MHz 3.0 ns: 100.0 ~ 160.0 MHz note: - specific data on request - rise time: 0.1 VDC ~ 0.9 VDC - fall time: 0.9 VDC ~ 0.1 VDC Dimensions JCO14 / JCO8 ø 0.55 max JCO14 12.8 20.4 0.8 #1 15.24±0.2 #7 pin connection 6.0 min. #14 #8 # 1: # 7: # 8: #14: not connected or e/d ground output supply voltage 5.3 ø 0.55 max JCO8 12.8 12.8 0.8 5.3 #1 7.620.2 #4 7.62±0.2 pin connection #8 #5 # 1: # 4: # 5: # 8: not connected or e/d ground output supply voltage in mm top view 6.0 min. side view bottom view O rder Information O Oscillator frequency type e/d function frequency stability supply voltage code 3.3 V = 3.3 Volt 7.620.2 option 1.0 ~ 160.0 MHz JCO8 JCO14 2 = no 3 = yes/tristate see table 1 blank = -10 °C ~ +70 °C T1 = -40 °C ~ +85 °C Example: O 20.0-JCO8-3-A-3.3V-T1 ( LF = RoHS compliant / Pb free pins or pads) J auch Quartz GmbH • e-mail: info@jauch.de full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice Oscillator · JCO · 3.3 V Enable / Disable Function pin #1 open or high gnd or low pin #3 oscillation high impedance Marking type frequency company code / date code Wave Soldering Profile bath temperature (°C) 260 200 150 100 50 0 ca. 3.5 °C/s ca. 2.0 °C/s ca. 5.0 °C/s Preferred Type JCO8-3-B-3.3 JCO14-3-B-3.3 Packaging JCO8-3-B JCO14-3-B packed in antistatic plastic tubes, 40 pcs packed in antistatic plastic tubes, 25 pcs 20 60 100 140 180 220 time (seconds) note: parts are also suitable for soldering systems with lead (Pb) content J auch Quartz GmbH • e-mail: info@jauch.de full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice