O45.0-JV75-B-3.3-10-B-T1

Oscillator · VCXO · 3.3 V SMD Voltage Control Crystal Oscillator · 7.5 x 5.0 mm actual size ■ two pinout versions available ■ reflow soldering temperature: 260 °C max. ■ ceramic/metal package 2002/95/EC RoHS compliant Pb free: pins / pads RoHS General Data type frequency range frequency stability over all* JV75 3.3 V 1.0 ~ 125.0 MHz ± 25ppm / ± 50ppm see table 1 current consumption supply voltage VDC frequency pulling range min. pulling control voltage pulling linearity max. temperature operating storage output rise & fall time load max. current max. low level max. high level min. standby function start-up time max. symmetry at 0.5 x VDC ◆ ▲ ◆ Table 1: Frequency Stability Code stability code B ± 50 ppm -10 °C ~ +70 °C -40 °C ~ +85 °C O O O available C ± 25 ppm O O see table 2 3.3 V ± 10% ± 50ppm / ± 100ppm / ± 150ppm 1.65 V ± 1.65 V ± 10% -10 °C ~ +70 °C / -40 °C ~ +85 °C -40 °C ~ +85 °C see table 3 15pF 4mA 0.1 x VDC 0.9 x VDC yes 10ms 45% ~ 55% typ. (40% ~ 60% max.) ■ ■ • standard ▲ ◗ * includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year. Table 2: Current Consumption max. Current at 15pF load: 1.0 ~ 29.9 MHz 30.0 ~ 44.9 MHz 45.0 ~ 51.9 MHz 52.0 ~ 125.0 MHz 15 mA 20 mA 25 mA 35 mA Table 3: Rise & Fall Time max. 6.0 ns: 1.0 ~ 39.9 MHz 5.0 ns: 40.0 ~ 125.0 MHz note: - specific data on request - rise time: 0.1 VDC ~ 0.9 VDC - fall time: 0.9 VDC ~ 0.1 VDC Recommendation To avoid phase noise or FM modulation in the output frequency spectrum, we recommend to feed the Vcontrol input pin by a low source impedance. not available > 52.0 MHz not available > 80.0 MHz ◗ on request, if < 52.0 MHz Dimensions 7.5 max. #6 #5 #4 2.46±0.1 5.0±0.2 1.8±0.2 4.2±0.1 2 x 2.54±0.1 2 x 2.54±0.1 2.0±0.1 standard pin connection B # 1: Vcontrol # 2: e/d # 3: ground # 4: output # 5: nc # 6: VDD optional pin connection A # 1: Vcontrol # 2: nc # 3: ground # 4: output # 5: e/d # 6: VDD in mm #1 #2 #3 1.4±0.1 #1 1.8±0.1 top view side view bottom view pad layout Order Information O Oscillator frequency in MHz type frequency stability in ppm supply voltage in Volt pulling range in ppm pin version option 1.0 ~ 125.0 MHz JV75 C = ± 25 ppm◆ B = ± 50 ppm ◆ 3.3 = 3.3 V 05 = ±50 ppm 10 = ±100 ppm▲ 15 = ±150 ppm ◗ ▲ ◗ B = standard A = optional blank = -10 °C ~ + 70 °C T1 = -40 °C ~ + 85 °C not available > 52.0 MHz not available > 80.0 MHz on request, if < 52.0 MHz Example: O 20.0-JV75-C-3.3-10-B ( LF = RoHS compliant / Pb free pins or pads) J auch Quartz GmbH • e-mail: info@jauch.de full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice 260209 O scillator · VCXO · JV75 · 3.3 V Taping Specification 4.0±0.1 2.0±0.1 1.75±0.1 0.4±0.05 120° 9.25±0.1 16.0±0.3 17.5 7.9 max. ø 13 ø 21 ø 1.5±0.1 8.0±0.2 5.5 max. Direction of feed 2.3±0.1 in mm 500 pcs per reel Reflow Soldering Profile temperature (°C) 260 200 150 100 50 60 ~180 s 60 s max. 10 s max. 260 °C max. 220 ±5 °C 180 ±5 °C Marking frequency type / date code date code: A ~ M: Jan.- Dec. 9: 2009 0: 2010 1: 2011 Jan. A July G Febr. B Aug. H Mar. C Sept. J Apr. D Oct. K May E Nov. L June F Dec. M time (s) note: parts are also suitable for soldering systems with lead (Pb) content Control Voltage Characteristic 3.3 V version 160 120 40 20 0 -20 -40 -80 -120 -160 0.825 1.65 2.45 3.3 Packing Note – – standard packing units are 500 pieces per reel non-multiple packing units are only supplied taped / bulk frequency pulling range ppm 80 Enable / Disable Function pin #2/#5 open or ≥ 0.7 VDC gnd or ≥ 0.3 VDC pin #4 enable high impedance control voltage (V) Jauch Quartz GmbH • e-mail: info@jauch.de full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice ø 80 ø 180/255 2.0