10023825

COMMUNICATIONS COMPONENTS 2.5 Gb/s Bias-Free Miniaturized Modulator Key Features • Bias-free operation for fast transmitter development and manufacturing • Small - required board space (footprint) reduced by greater than 70% compared with standard butterfly package • Printed circuit board (PCB) compatible - single in-line package mounts pins-down • 1535 to 1565 nm operation; L-band versions available • Low drive voltage; compatible with commercial drivers • Low chirp for maximum transmission distance (>1000 km) Applications • Medium- and long-haul transmission • DWDM and TDM transmission The 2.5 Gb/s bias-free modulator is a digital device in which the bias point of the interferometer is set to operate at about the half-intensity point (quadrature). A bias control circuit is not required. This feature simplifies circuit design and speeds up product development. The device provides superior signal quality across a wide range of wavelengths in the C and L bands and can be used to modulate tunable lasers. The modulator is designed for medium- and long-haul transmission in dense wavelength division multiplexing (DWDM) and time division multiplexing (TDM) systems. As the optical layer extends into the metropolitan and enterprise areas, board real estate is reduced and the component functionality requirement increased. The JDSU miniaturized line of modulators optimizes board space with a footprint reduced by 70%. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 2.5 GB/S BIAS-FREE MINIATURIZED MODULATOR 2 Typical Performance Characteristics Typical Frequency Response Curve, S21 0 0 -2 S21 (dB) S11 (dB) -4 -6 -8 -10 -12 0 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 -2.50 -5.00 -7.50 -10.00 -12.50 -15.00 -17.50 -20.00 0 0.5 Typical Return Loss Curve, S11 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 Dimensions Diagram (Specifications in inches [mm] unless otherwise noted.) 40 [1000] 1.762 [44.75] .386 [9.8] 40 [1000] .010 [0.25] .200 [5.08] .463 [11.77] .100 [2.54] .400 [10.16] 1.600 [40.64] 900 µm loose tube RF PIN Ø .012 [0.3] .170 [4.32] .081 [2.06] GROUND PIN Ø .020 [0.51] QTY (2) #2-56 UNC x .080 DP. (2) PLACES .272 [6.91] .244 [6.18] 21001067 X .216 [5.49] .102 [2.6] Ø .210 [5.33] .108 [2.75] TO BOTTOM OF PINS 2.56 [65.08] .102 [2.6] .083 [2.1] 2.5 GB/S BIAS-FREE MINIATURIZED MODULATOR 3 Specifications Parameter General Material Crystal orientation Waveguide process Optical Operating wavelength Insertion loss, no connectors (note2) On/off extinction ratio, low frequency Optical return loss Electrical RF port Drive voltage, V peak-to-peak, at 2.5 Gb/s PRBS (note3) Vπ at 100 kHz (note3) S21 electro-optic bandwidth (-3 dBe) (note1, 3 ) S11 return loss, 0.03 to 2.50 GHz (note3) RF input power Chirp, alpha parameter Bias port Vπ at DC Impedance Mechanical Input Output (note4) RF connection Bias connection Environmental Operating temperature Storage temperature 1. Relative to 130 MHz. Specification Lithium niobate x-cut, y-propagating APE 1535 to 1565 nm ≤5.0 dB ≥20 dB ≥50 dB 3.6 V typical ≤3.7 V ≥2.5 GHz ≤-9.5 dB ≤24 dBm |α|