30-7602-660

COMMUNICATIONS COMPONENTS Up to 660 mW Fiber Bragg Grating Stabilized 980 nm Pump Modules 3000 Series Key Features • Very high kink-free powers to 660 mW • Low-profile, epoxy-free, and flux-free 14-pin butterfly planar package with PM fiber • Fiber Bragg grating stabilization • Multiple wavelength availability • Integrated thermoelectric cooler, thermistor, and monitor diode • High dynamic range • Excellent low-power stability Applications • Next-generation dense wavelength division multiplexing (DWDM) erbium doped fiber amplifiers (EDFAs) requiring the highest power with “locked” wavelength emission • Reduced pump-count EDFA architectures • Very long distance cable television (CATV) trunks and very high nodecount distribution • Pump splitting (multiple EDFA stages) • FTTx, Agile metro/ROADM The JDSU 3000 Series 980 nm pump module uses a planar construction with chip on subcarrier. The high-power laser chip is hermetically sealed in a low-profile, epoxy- and flux-free 14-pin butterfly package and fitted with a thermistor, thermoelectric cooler, and monitor diode. This product uses a polarization maintaining fiber (PMF) pigtail that allows excellent side mode supression ratios (SMSR) over a very wide dynamic range. The 3000 Series pump module uses PM fiber Bragg grating stabilization to “lock” the emission wavelength. It provides a noise-free narrowband spectrum, even under changes in temperature, drive current, and optical feedback. Wavelength selection is available for applications that require the highest performance in spectrum control with the highest available powers. Compliance • Telcordia GR-468-CORE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 3000 SERIES PUMPS 2 Dimensions Diagram (Note: Specifications in mm unless otherwise noted; tolerance = .x ± .3, .xx ± .20.) 45.04 30.0 1600 M I N (1900 NOM ) 1000 NOM . TO CENTER OF GRATING 26 . 0 20 . 8 17.8 1 .5 500 NOM . TO C/L OF SPLICE (OPTIONAL) 4 0 . 5 N O M . 1 5 . 5 1 2. 7 9 .0 STRAIN RELIEF FLEXIBLE