30-8000-540-FL

厂商：
JDSU
封装：
描述：
30-8000-540-FL - Up to 660 mW Fiber Bragg Grating Stabilized 980 nm Pump Modules - JDS Uniphase Corp...

数据手册：

下载30-8000-540-FL.pdf

立即购买

详情介绍
数据手册
价格&库存

30-8000-540-FL 数据手册

COMMUNICATIONS COMPONENTS Up to 660 mW Fiber Bragg Grating Stabilized 980 nm Pump Modules 3000-FL Series Key Features • Very high kink-free powers up to 660 mW • Low-profile, epoxy-free, and flux-free 14-PIN butterfly planar package • Fiber Bragg grating stabilization • Wavelength selection available • Tight tracking of fiber-coupled power • Integrated thermoelectric cooler, thermistor, and monitor diode • High dynamic range • Excellent low power stability Applications • Next-generation, dense wavelength division multiplexing (DWDM) erbium-doped fiber amplifiers (EDFAs) requiring the highest power with “locked” wavelength emission • Reduced pump-count EDFA architectures • Very long distance CATV trunks and very high node-count distribution • Pump splitting (multiple EDFA stages) • FTTx, agile metro/ROADM The JDSU 3000-FL Series 980 nm pump module features a planar construction with chip on subcarrier. The high-power JDSU laser chip is hermetically sealed in a low-profile, epoxy- and flux-free, 14-pin butterfly package and fitted with a thermistor, thermoelectric cooler, and monitor diode. The module meets the stringent requirements of the telecommunications industry, including Telcordia™ GR-468-CORE for hermetic 980 nm pump modules. The 3000-FL Series pump module uses fiber Bragg grating stabilization to “lock” the emission wavelength. It provides a noise-free narrowband spectrum, even under changes in temperature, drive current, and optical feedback. Wavelength selection is available for applications that require the highest performance in spectrum control with the highest available powers. The 3000-FL Series design also offers tight tracking of fiber-coupled power via the monitor diode signal. Compliance • Telcordia GR-468-CORE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 3000-FL SERIES 2 Dimensions Diagram 250 µm Bare Fiber Type A Wiring (Note: Specifications in mm unless otherwise noted; tolerance = .x ± .3, .xx ± .20 The module pigtail consists of 250 µm buffered, Corning PureModeTM HI-1060 single-mode fiber.) 45.04 30.0 1600 M I N (1900 NOM ) 1000 NOM . TO CENTER OF GRATING 26 . 0 20 . 8 17.8 1 .5 500 NOM . TO C/L OF SPLICE (OPTIONAL) 4 0 . 5 N O M . 1 5 . 5 1 2. 7 9 .0 STRAIN RELIEF FLEXIBLE

下载 PDF

30-8000-540-FL

1. 物料型号： - 3000-FL系列，例如：30-xxxx-500-FL至30-xxxx-660-FL。

2. 器件简介： - JDSU 3000-FL系列980nm泵模块具有高达660mW的高功率输出，低轮廓、无环氧、无助焊剂的14引脚蝶形平面封装，并集成了热电制冷器、热敏电阻和监控二极管。该模块符合电信行业的严格标准，包括Telcordia™ GR-468-CORE标准，用于密封的980nm泵模块。

3. 引脚分配： - 14引脚蝶形平面封装，具体引脚功能未在文档中详细说明。

4. 参数特性： - 包括高动态范围、优异的低功率稳定性、温度变化、驱动电流和光反馈下保持窄带光谱等特点。

5. 功能详解： - 使用光纤布拉格光栅稳定技术锁定发射波长，即使在温度、驱动电流和光反馈变化下也能保持窄带光谱。提供波长选择，以满足对光谱控制要求极高的应用，并提供高功率输出。

6. 应用信息： - 适用于下一代密集波分复用（DWDM）掺铒光纤放大器（EDFAs）、减少泵浦计数的EDFA架构、长距离CATV干线和高节点计数分配、泵浦分裂（多个EDFA阶段）、FTTx、灵活的城域网/ROADM等。

7. 封装信息： - 低轮廓、无环氧、无助焊剂的14引脚蝶形平面封装，带有热敏电阻、热电制冷器和监控二极管。

30-8000-540-FL 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“30-8000-540-FL”相匹配的价格&库存，您可以联系我们找货

免费人工找货