CDPS532M010

COMMERCIAL LASERS Continuous Wave 532 nm Diode-Pumped Solid State Laser CDPS532M Key Features • Compact • Excellent performance-to-price ratio • Low noise • Excellent beam quality • High reliability Applications • Biotechnology • Semiconductor instrumentation • Reprographics • General instrumentation The JDSU CDPS532M is a continuous wave 10 to 50 mW 532 nm diode-pumped solid state laser in a very compact package. Its head contains the laser cavity together with a beam-shaping telescope to provide a low divergence laser with excellent mode quality. The laser controller allows full control and diagnostics of the laser system. The controller provides analog and RS232 interfaces. The laser system is powered by an external 5 V direct current (DC) power supply connected to the controller. Diagnostic features include laser parameters like output power, pump diode current, operating hours, and more. Control functions feature interlock and system status, as well as external output power control. The CDPS532M laser offers an improved cavity design for longer lifetime and reliability. Its simple yet elegant optical layout is especially designed for volume manufacturing. Changes in mechanical design are further enhanced by new control software for optimized operating parameters. The CDPS532M laser provides excellent performance for the price, and low operating costs while maintaining consistency and quality. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com CDPS532M 2 Dimensions Diagram: Controller (Specifications in mm unless otherwise noted.) 77.34 59.95 7.62 43.69 5.59 91.92 140.64 AIR FLOW 126.38 152.40 100 4X Ø2.79 51.94 23.88 4X Ø3.66 99.70 LASER HEAD INTERFACE 15 PIN D-SUB FEMALE CONNECTOR 61.47 CDPS532M 3 Dimensions Diagram: Laser Head (Specifications in mm unless otherwise noted.) 4X CLEARANCE AND C'BORE FOR #6-32 X 1.5 CAP SCREW ON BOTH TO AND EBOTTOM DANGER 15 PIN HIGH DENSITY D-SUB CONNECTOR BEAM IS POLARIZED ORTHOGONAL TO MOUNTING (>100:1) ± 5° 15.875 19.050 SERIAL NO. 38.100 19.050 11.113 MODEL HEAT DISSIPATED FROM THIS SURFACE WAIST FRONT SURFACE ± 100 mm 6.350 25.400 101.600 6.985 90.678 4X #6-32 X .20 DP PROVISION FOR Ø.3.175 REGISTRATION PINS ON TOP AND BOTTOM SURFACE ONLY 16.510 25.400 38.100 10.795 25.400 50.800 19.050 CDPS532M 4 Specifications Parameter Optical Wavelength Output power CDPS532M-010 CDPS532M-020 CDPS532M-050 Power stability (2 hour, 25±3 °C)1 Mode quality M2 Beam diameter (1/e2 point) Beam divergence (full angle) Polarization ratio (E-vector is vertical) Noise (rms, 20 Hz to 2 MHz) Ellipticity Pointing stability (2 h, 25 ± 3 °C)1 Static alignment2 Beam position Beam angle Environmental Base plate temperature Operating Non-operating Shock (11 ms duration) Operating Non-operating Vibration (sinusoidal, 5 to 500 Hz) Operating Non-operating Heat sink requirements Surface flatness Torque specification 1. After warm-up. Specification 532 ± 1 nm 10 mW 20 mW 50 mW