CDPS532S010

COMMERCIAL LASERS Continuous Wave 532 nm Diode-Pumped Solid State Laser CDPS532S Key Features • Compact • Robust design • Low noise • Excellent beam quality • High reliability Applications • DNA sequencing • Flow cytometry • Capillary electrophoreses • Instrumentation The JDSU CDPS532S is a compact, continuous wave, 532 nm, diode-pumped solid-state laser. The system features a laser head and multi-function controller that requires a 5 V DC power source. It provides 10 and 20 mW of optical power with remarkable beam quality and low noise. One of the key benefits of the CDPS532S is its compact and efficient design, which makes it easy to integrate into OEM instrumentation. The laser head does not incorporate beam shaping optics to allow for the smallest possible packaging. The CDPS532S laser controller is also very compact and efficient enough to forgo additional heat sinking. The CDPS532S laser head features an improved cavity design for longer lifetime and reliability. Its mechanical design requires fewer parts and is therefore ideally suited for high volume manufacturing techniques. Overall, the CDPS532S laser's sophisticated new design results in exceptional optical performance from a rugged package with superior long term stability. Easy to operate and to integrate, the controller interface provides several control functions, including interlock and diagnostics via transistor-to-transistor logic (TTL) and analog signals. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com CDPS532S 2 Dimensions Diagram: Controller (Specifications in mm unless otherwise noted.) ATI Controller Assembly Ø4 (4X) 111 100.80 63 50.40 21.90 CDPS532S 3 Dimensions Diagram: Laser Head (Specifications in mm unless otherwise noted.) CLEARANCE AND C'BORE FOR 4X #6-32 X 1.5 CAP SCREW DANGER 15 PIN HIGH DENSITY D-SUB CONNECTOR BEAM IS POLARIZED ORTHOGONAL TO MOUNTING SURFACE (>100:1) ± 5° MANUFACTURED SERIAL NO. 28.854 14.427 R1.588 25.400 Ø 4.978 HEAT DISSIPATED FROM THIS SURFACE 4X Ø 4.039 28.550 2X R 1.600 19.050 28.550 39.827 MODEL 4.750 3.175 69.850 76.200 4X 4.49 CHAM TYP CDPS532S 4 Specifications Parameter Optical Wavelength Output power CDPS532S-010 CDPS532S-020 Power stability (1 hour, 25±3 °C) Mode quality M2 Beam diameter (1/e2 point, at a distance of 250 mm) Beam divergence (full angle) Polarization ratio (E-vector is vertical) Noise (rms, 20 Hz to 1 MHz) Ellipticity Pointing stability (after 2 hour warm-up, 25±3 °C) Static alignment Beam position Beam angle Environmental Base plate temperature Operating Non-operating Shock (11 ms duration) Operating Non-operating Vibration (sinusoidal, 5 to 500 Hz) Operating Non-operating Heat sink requirements Surface flatness Torque specification Specification 532 ± 1 nm 10 mW 20 mW