FBP-SM03-C

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Fiber Inspection and Cleaning Kits Key Features • Complete solution for inspecting and cleaning fiber connectors in a single kit • Easily inspect and clean both sides of fiber connections • Crisp, clear fiber end face images for detailed visual inspection of contamination • Portable, handheld probe and display • Highly effective cleaning tools • Precision inspection tips for different connectors and applications • Compact carrying case for portability and organization Applications • Easily inspects both sides (bulkhead and patch cord) of a fiber connection Dirt, dust, and other particles on fiber end faces are the primary causes of troubleshooting in optical networks. In addition, most field test failures can be attributed to dirty connectors. JDSU Fiber Inspection and Cleaning Kits enable quick and easy visual inspection to determine whether fiber connectors are truly clean before they are mated. Proactively inspecting and cleaning fiber connectors, enables technicians to reduce network troubleshooting and downtime, optimizes signal performance, and prevents network damage. JDSU provides the industry’s most complete solution for inspecting and cleaning fiber connectors with a combination of all the necessary equipment that technicians need to ensure the integrity of optical connections. These convenient kits address the vast array of inspection and cleaning needs in today’s field applications. • Provides a quick and easy cleaning solution for end face contaminants For inspection, each kit comes equipped with a probe microscope, a portable handheld HD3 video display, and eight precision inspection tips for various bulkhead and patch cord configurations. For cleaning, each kit includes two bulkhead/patch cord cleaning tools, connector cleaning solvent, and lint-free wipes. All contents are provided in a compact and secure carrying case, providing a safe, portable, and convenient solution for fiber technicians. • Effectively remove stubborn contaminants with cleaning solvent WEBSITE : www.jdsu.com/test FIBER INSPECTION AND CLEANING KITS 2 Kit Components Fiber Inspection The JDSU video fiber inspection probe and handheld display system is used to inspect both “male” (patch cord) and “female” (bulkhead) sides of a fiber interconnect. Both the probe and display fit comfortably in a users’ hand for portability and easy operation. Various interchangeable tips enable optimized inspection for different connector types and applications. The FBP series probe provides dual (200x and 400x) magnification and a selection of over 350 different inspection tips. FBE series probes provide a more economical option with single magnification (200x or 400x) and a selection of common tip configurations. Both configurations are hardwired with a compact HD3 series display, which includes a 1.8-inch TFT LCD to provide a portable inspection solution for fiber technicians. FBE Probe FBP Probe FBET Inspection Tip FBET-SC Focus Control Recirculating focus wheel adjusts focus on the display screen AC Power/Charger Input Alternative AC power and battery charger input Probe Input 4-pin FBP Probe Input for stand-alone display Low Battery Indicator When lit, remaining battery life = 30 minutes 1.8”TFT LCD Screen FBPT Inspection tip and Barrel Assembly Focus Control Adjust focus on the display screen Magnification Control Switch between low & high magnification HD3 Display Accessory Connection Power Mode Selector · ON mode for continuous ON · GripSwitch Mode designed to save battery life · Off/Charge Mode to turn power OFF or to CHARGE battery Hex Screw Remove to access battery compartment GripSwitch™ Press both sides to turn power ON and release to turn power OFF FBE-SM1-C/FBE-SM2-C Microscope Display Compatability Patchcord Inspection Tips FBE HD3 FBET Series (~30) Universal 1.25 mm Universal 2.5 mm Universal 2.5 mm APC SC, LC, FC, ST, SC/APC Yes Yes Yes Yes Yes FBP-SM03-C FBP HD3 FBPT Series (350+) Universal 1.25 mm Universal 2.5 mm Universal 2.5 mm APC SC, LC, FC, ST, SC/APC Yes Yes Yes Yes Yes Bulkhead Inspection Tips Portable Cleaning Tool: Bulkhead/Patch Cord - 2.5 mm Portable Cleaning Tool: Bulkhead/Patch Cord - 1.25 mm Cleaning Solvent Cleaning Wipes Carrying Case FIBER INSPECTION AND CLEANING KITS 3 Fiber Cleaning Tools IBC™ brand cleaners are dry cloth cleaners specifically designed to clean either side of a fiber connection. For cleaning connectors behind a bulkhead, simply insert the device into the bulkhead until a click sound is heard. For cleaning patch cords, the dust cap acts as an adapter to receive the connector ferrule. These tools are simple to use and highly effective at removing oil and dust contaminants. FCC2™ optical-grade solvent is designed specifically for cleaning optical connectors. Electrically conductive, this solvent is ideal and effective at removing stubborn forms of debris by dissipating static charges that bind particulate to connector end faces. Ideal for wet-to-dry cleaning procedures, this fast-drying solvent is nonflammable, nontoxic, noncorrosive, and safe to use. Optical-grade cleaning solvent and lint-free wipes remove stubborn contaminants IBC Cleaner (1.25 mm) IBC Connector cleaner (Universal 2.5 mm) Specifications FBE Probe Inspection Tip Compatibility Dimensions Detection w/ HD3 display Low Mag (HFOV) High Mag (HFOV) Weight Cord Length Camera Type Light Source Lighting Technique Power Source FBET Series tips 12.5 x 3.3 x 3.2 cm (5 x 1.32 x 1.28 in)