FCD488FC-020

COMMERCIAL LASERS Continuous Wave 488 nm Solid-State Laser FCD488 Key Features • Compact – optics and electronics integrated in one housing • Low heat load – no heat sink required • Good efficiency – requires only small 5 V power supply • Fiber-based architecture – enables fiber-delivered version • High reliability – due to telecom-style packaging technology Applications • Biotechnology • Semiconductor instrumentation • General instrumentation The FCD488 is a continuous wave 10, 20 and 25 mW 488 nm solid-state laser, featuring fiber-based architecture. The package contains both the optical elements of the laser and the control electronics, allowing full control and diagnostics of the laser system through an analog interface and RS232 interface. Powered by an external 5 V DC power supply, the laser is cost-efficient, reliable, and compact, with excellent electrical and thermal efficiency. It has a low heat load, so the laser operates without a heat sink. Based on JDSU’s Frequency Converted Diode technology, the FCD488 enables consistent high volume laser manufacturing, with a “package, splice, and test” design. The components are put in hermetic packaging. The fibers are spliced together. And the laser is tested. The FCD488 is available in two versions: a free space and a fiber-delivered version with the same characteristics and reliability as the free space laser. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com CONTINUOUS WAVE 488 NM SOLID-STATE LASER 2 Dimensions Diagram (Specifications in mm unless otherwise noted.) 125 COMMUNICATION PORT 15-PIN D-SUB CONNECTOR 5.0 7.5 115.0 5 V PO WER SUP PL Y 55.0 70 17.5 4X 4.0 THRU 10.1 13.8 LA S E R S T A T U S 2 LEDS 11.5 19.0 34 5.5 Free Space COMMUNICATION PORT 15-PIN D-SUB CONNECTOR 1.5M HARNESS LENGTH 7.5 68 ROM LENGTH 5V POWER SUPPLY 55.0 70 12.7 20 LASER STATUS 2 LEDS 4X 4.0 THRU 115.0 125 5.0 22 34 5.5 Fiber Delivered CONTINUOUS WAVE 488 NM SOLID-STATE LASER 3 Specifications Parameter FCD488-010 (Free Space) FCD488-020 (Free Space) FCD488-025 (Free Space) FCD488FC-010 FCD488FC-020 (Fiber Delivered) (Fiber Delivered) Optical Wavelength Output power Power stability (2 hour, 25±3 °C) after warm-up Mode quality M2 Beam diameter (1/e2 point) Beam divergence (full angle) Polarization ratio (E-vector is vertical) Noise (rms, 20 Hz to 2 MHz) Ellipticity Pointing stability after warm-up Static alignment Beam position Beam angle Environmental Base plate temperature Operating Non-operating Shock (11 ms duration) Operating Non-operating Vibration (sinusoidal, 5 to 500 Hz) Operating Non-operating Warm-up time Electrical requirements Operating voltage Current required 10 mW 20 mW 488 ± 2 nm 25 mW 10 mW