FWS-D10020003

COMMUNICATIONS COMPONENTS 1510/1550 and 1550/1625 nm Filter Wavelength Division Multiplexers Key Features • Thin film filter based • Wide bandwidth • Low insertion loss • High isolation • Low temperature dependent loss • Epoxy-free optical path Applications • Network control applications • Amplifier chain control • Network protocol information JDSU 1510/1550 and 1550/1625 filter wavelength division multiplexers use interference filters to add a supervisory channel for active fiber monitoring. Stable and reliable, filter WDMs have wide bandwidth, low insertion loss, high isolation, and low temperature dependent loss. Compliance • Telcodia GR-1221 Performance for 1510/1550 nm (Model D1) NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 1510/1550 AND 1550/1625 NM FILTER WAVELENGTH DIVISION MULTIPLEXERS 2 Performance for 1550/1625 nm (Model E1) ATTENUATION (dB) 35 30 0 25 20 0 15 10 REFLECT CHANNEL 0 PASS CHANNEL 5 0 1510 1540 1570 1600 1630 1660 WAVELENGTH (nm) Specifications Parameter Pass 1510 / Reflect 1550 1500 to 1520 nm Maximum Maximum Minimum 1529 to 1565 nm Maximum Maximum Minimum Minimum Minimum Maximum Maximum Maximum Maximum Maximum Pass 1550 / Reflect 1510 Pass 1625 / Reflect 1550 Pass 1550 / Reflect 1625 1529 to 1565 nm Pass port (C↔P) wavelength range λP Pass port (C↔P) insertion loss Pass port (C↔P) flatness Pass port (C↔P) isolation at λR Reflect port (C↔R) wavelength range λR Reflect port (C↔R) insertion loss Reflect port (C↔R) flatness Reflect port (C↔R) isolation at λP Directivity Optical return loss Polarization dependent loss Polarization mode dispersion Temperature dependent loss Optical power Tensile load Operating temperature Storage temperature Package dimensions (D x L) 250 µm fiber 900 µm fiber Fiber length 1529 to 1565 nm 1600 to 1650 nm 0.6 dB 0.3 dB 30 dB 1500 to 1520 nm 1529 to 1565 nm 0.4 dB 0.15 dB 12 dB 55 dB 50 dB 0.05 dB 0.1 ps 0.1 dB 500 mW 5N -5 to 75°C -40 to 85°C 1600 to 1650 nm 5.5 x 30 mm (Standard), 3.2 x 30 mm (Miniature) 5.5 x 40 mm (Standard), 3.2 x 40 mm (Miniature) >1.0 m 1 510/1550 AND 1550/1625 NM FILTER WAVELENGTH DIVISION MULTIPLEXERS Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: FWS-D10010000 FWSCode D1 D2 E1 E2 00 Code 1 2 Fiber Type 250 µm fiber 900 µm fiber Code 0 1 00 Package Standard Miniature Code 0 1 2 3 4 5 6 Connector1, 2 No connector FC/SPC FC/APC SC/SPC SC/APC ST LC/SPC Wavelength Pass 1510/Reflect 1550 (for 1510/1550nm) Pass 1550/Reflect 1510 (for 1510/1550nm) Pass 1625/Reflect 1550 (for 1550/1625nm) Pass 1550/Reflect 1625 (for 1550/1625nm) 1. Connectors available only with 900 µm fiber option. 2. Other connectors available upon request. N ORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com July 2008 Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 21021906 003 0708 WDMFILTER15101625.DS.CC.AE SMF-28 is a registered trademark of Corning Incorporated. Telcordia is a registered trademark of Telcordia Technologies Incorporated.