NEM-4145

COMMUNICATIONS COMPONENTS Network Expansion Module Key Features • 1x3 to 2x16 as standard • Fused fiber and planar technology • Low excess loss and PDL • Single and dual window operation • High and standard grades • Custom configurations available Applications • Passive optical networks • Secure data networks • CATV • Scientific equipment The JDSU network expansion module enables the splitting of optical signals in singlemode optical fiber. The standard product comprises one or two input ports and between three and 16 output ports. Designed for optical networking applications, the module uses advanced fused fiber and planar technology to yield ultra-low excess loss and low polarization dependent loss (PDL) in a compact package. Standard wavelength ranges are 1310, 1550, 1585 nm and 1310/1550 nm. A wide variety of housings, including an injection-moulded fiber organizer, 19” rack, and LGX cassette are available and most connector types can be fitted. Two grades of performance are provided: Grade P modules offer the solution to demanding power and PDL budgets through the use of the highest specification couplers. Grade A modules offer a cost-effective answer to standard splitter requirements, including CATV and access networks. In addition to the standard products shown, a wide variety of custom configurations are available for specialized applications. These include alternative housings, wavelengths, and high port counts over 16. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com NETWORK EXPANSION MODULE 2 1x8 Network Expansion Module Wavelength Dependence 10.5 10.0 I n s e r ti o n L o s s ( d B ) Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8 9.5 9.0 8.5 8.0 1520 1525 1530 1535 1540 1545 1550 1555 1560 Wavelength (nm) Specifications Parameter Network Expansion Module Unit nm Operating wavelength Single window (1310 ±20, 1550 ±20 or 1585 ±20) Dual window (1310 ±20 and 1550 ±20) Port configuration1 1x3 1x4 1x5 1x6 1x8 1x10 1x12 1x16 1x3 1x4 1x5 1x6 1x8 1x10 1x12 1x16 Max. insertion loss2 P Grade 5.2 6.4 7.5 8.4 9.7 10.8 11.7 12.9 5.3 6.8 7.9 8.8 10.3 11.4 12.2 13.7 A Grade 5.3 6.6 7.8 8.6 9.9 11.1 11.9 13.3 5.5 7.1 8.3 9.1 10.7 12.0 12.8 14.4 Uniformity3 P Grade 0.60 0.65 0.85 1.00 1.05 1.25 1.40 1.45 0.90 1.25 1.50 1.60 1.95 2.20 2.30 2.65 A Grade 0.85 0.95 1.25 1.40 1.50 1.75 1.95 2.05 1.20 1.70 2.10 2.20 2.70 3.10 3.20 3.70 Polarization dependent loss4 P Grade 0.10 0.14 0.14 0.15 0.16 0.17 0.19 0.19 0.12 0.14 0.16 0.16 0.17 0.19 0.20 0.20 A Grade 0.12 0.17 0.18 0.18 0.20 0.21 0.23 0.23 0.13 0.17 0.21 0.23 0.23 0.25 0.28 0.28 Polarization mode dispersion 55 Fiber Corning SMF-28 Operating temperature6 -40 to 75 Storage temperature -40 to 85 1. For 1xM, read 1xM: 2xM 2. Excludes connector loss, PDL and TDL. 3. Difference between maximum and minimum insertion loss at constant temperature over all paths and all wavelengths, not including PDL. 4. Typical; at band center wavelength. 5. Excluding connector return loss. 6. For connectorized module, operating temperature range is -5 to 75 °C. dB dB dB dB dB dB ps/nm dB °C °C NETWORK EXPANSION MODULE 3 Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: NEM-C1843A111 (Network Expansion Module, 1550±20 nm, 1 x 8, 150 x 95 x 10 mm housing, 900 µm loose-tube pigtail, Grade A, Corning SMF-28 fiber, 1 m pigtail, FC/PC connectors) NEMCode 4 C L A Wavelength 1310±20 nm 1550±20 nm 1585±20 nm 1310/1550±20 nm Code 3 4 5 6 8 A C G Number of Output Ports 3 output ports 4 output ports 5 output ports 6 output ports 8 output ports 10 output ports 12 output ports 16 output ports Code 0 1 2 3 Pigtail Type Bulkhead connector2 250 µm primary-coat 900 µm loose-tube 3 mm fan-out sleeve Code 0 1 2 Pigtail Length3 Bulkhead connector2 1m 2m Code 1 2 Number of Input Ports 1 input port 2 input ports Code A P Grade Grade A Grade P Code 4 5 6 Housing 150x95x10 mm 1 19" rack LGX cassette Code 1 Fiber Type Corning SMF-28 Code 0 1 3 5 9 A B Connectors None FC/PC FC/APC SC/APC FC/UPC SC/UPC LC4 Note: 1. Injection moulded plastic fiber organizer. 2. 19" rack and LGX cassettes are fitted with bulkhead connectors. 3. Minimum pigtail length. Other pigtail lengths are available on request. Where connectorized, pigtail length is to connector end face. 4. Not available for pigtail type 3 (3 mm fan-out sleeving). SMF-28 is a registered trademark of Corning Incorporated. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2005 JDS Uniphase Corporation. All rights reserved. 10143105 Rev. 001 12/05 NEM.DS.CC.AE N ORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com