PL-SLX-00-SG0-CX

COMMUNICATIONS COMpONENTS 850 nm 4.25 G VCSEL LC TOSA PL-SLx-00-SG0-Cx Key Features • Data rates up to 4.25 Gbps • Optimized for -40 °C to 85 °C transceiver applications • Optical power monitor with excellent tracking • Common cathode, common anode, or differential drive VCSEL TO package aligned to a plastic LC barrel • Custom specification tolerances available • Fully burned-in and stabilized Benefits • Proven performance and reliability per GR-468-CORE • Very high reliability Low FIT High MTBF • Industrial temperature operation • Qualified AC modulation performance This JDSU 850 nm LC connectorized TOSA (Transmit Optical Sub-Assembly) meets the requirements of demanding 4.25 Gb/s transceiver modules. The product utilizes a high performance, high reliability VCSEL integrated in a TO-46 package. Each device is actively aligned to a precision plastic LC barrel using a proprietary alignment algorithm and tested to precise requirements. The JDSU design produces excellent monitor current tracking over temperature. Each unit receives JDSU’s proprietary burn-in and stabilization process to ensure a low failure rate and long life expectancy while providing continuously consistent performance. Each part is electro-optically tested to ensure optimum performance and yield in the application. The PL-SLx-00-SG0-Cx converts an electrical signal into optical power at data rates up to 4.25 Gb/s and it is designed for performance over extended operating temperatures and power conditions with high reliability. The circular optical beam provides optimal power coupling to both 50/125 mm and 62.5/125 mm multimode fibers. NORTH AMERICA: 800 498-JDSU (5378) wORLDwIDE: +800 5378-JDSU wEBSITE: www.jdsu.com 850 NM 4.25 G VCSEL LC TOSA  Mounting Dimensions (3 pin Versions) pL-SLC-00-SG0-C0 pL-SLA-00-SG0-C0 pin 1 2 3 Symbol ALD KLD, APD KPD Function VCSEL Anode VCSEL Cathode, Monitor Anode, Case Monitor Cathode pin 1 2 3 Symbol KLD ALD, KPD APD Function VCSEL Cathode VCSEL Anode, Monitor Cathode, Case Monitor Anode 850 NM 4.25 G VCSEL LC TOSA  Mounting Dimensions (pL-SLD-00-SG0-C0 and pL-SLD-00-SG0-C1) OSA Notch over Pin 3 1 Notch over Pin 3 pL-SLD-00-SG0-C0 pL-SLD-00-SG0-C1 pin 1 2 3 4 Symbol ALD KLD APD KPD Function VCSEL Anode VCSEL Cathode Monitor Anode Monitor Cathode pin 1 2 3 4 Symbol ALD KLD KPD APD Function VCSEL Anode VCSEL Cathode Monitor Cathode Monitor Anode 850 NM 4.25 G VCSEL LC TOSA  Mounting Dimensions (pL-SLD-00-SG0-C3) 4.039 1.270 4X 13.51 2X 5.941 6.599 10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL 0.5 A TO CAN ASSY PIN 1 PIN 2 2.083 5.080 BARREL KEYING FEATURE A LC BARREL ID 2.921 45°±1° 0.838 OPTICAL REF PLANE 0.660 6.82 +0.38 - 0.25 4.17 4X 2.540 0.450 PIN 4 BARREL KEYING FEATURE TO BE IN THIS QUADRANT PIN 3 1 Dimensions in mm pL-SLD-00-SG0-C3 pin 1 2 3 4 Symbol ALD KLD KPD GND/APD Function VCSEL Anode VCSEL Cathode Monitor Cathode Case ground/Monitor Anode Shipping Information Shipped in anti-static stackable trays. Absolute Maximum Ratings (Tcase = 25 °C , Continuous Wave (CW) operation unless otherwise stated) parameter Storage temperature Lead solder temperature Laser forward current1 Laser reverse voltage Photodiode forward current ESD2 Symbol Tst Ts If BVRLD Ifm Ratings -40 to +125 260 °C for 10 sec. 2 mm from case 10 -5 10 Class 1 Unit °C mA V mA Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability. 1. Peak 2. HBM 850 NM 4.25 G VCSEL LC TOSA  Electro-optical Characteristics (Tcase = 25 °C , CW operation unless otherwise stated) VCSEL parameter Case operating temperature Peak emission wavelength RMS spectral width lp temperature coefficient Threshold current Ith temperature variation Slope efficiency1 Symbol Top lp Dl Dlp Ith DIth h h h Dh/DT Vf Rs Rs Rs DRs/DT tr tf efiber POC RIN12 IPD DIm ID CM Test Condition Minimum -40 840 Typical Maximum 85 860 0.65 2.0 1.0 0.15 0.17 Unit °C nm nm nm/°C mA mA mW/mA mW/mA mW/mA PPM/°C V Ohms Ohms Ohms ppm/°C psec psec % mW dB/Hz mA %/°C 850 0.06 1.0 If = 6 mA T = -40 °C to 85 °C T = -40 °C to 85 °C T = 25 °C Pout = 0.5 mW T = -40 °C T = 85 °C If = 6 mA T=25 °C, If = 6 mA T=-40 °C T=85 °C If = 6 mA T= 0 °C to 70 °C 20% - 80% 20% - 80% If = 6 mA 1 GHz BW, If = 6 mA Pout = 0.5 mW Vr = 1.5 V Pout = 0.5 mW T = 0 to 70 °C Vrm = 1.5 V Vr = 5 V Vrm = 1.5 V Freq = 1 MHz 0.10 0.125 0.08 -6000 1.8 55 2.2 65 75 Slope efficiency temperature variation Laser forward voltage Series resistance 40 35 Series resistance temperature coefficient Rise/Fall time2 Coupling efficiency Average fiber coupled power Relative intensity noise Photocurrent Monitor current tracking3 -2000 80 80 75 0.50 -130 0.15 0.05 -122 0.6 0.1 Monitor dark current Monitor capacitance 20 100 nA pF 1. Slope efficiency is defined as DPo/DIf. 2. Drive electronics and optical measurement hardware affect Rise/Fall Time measurement. 3. Change in optical power over temperature while operated in a feedback loop in which the monitor current is held constant. 850 NM 4.25 G VCSEL LC TOSA Order Information For more information on this or other products and their availability, please contact your local JDSU account manager or J DSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at c ustomer.service@jdsu.com. Sample: pL-SLC-00-SG0-C0 part Number PL-SLC-00-SG0-C0 PL-SLA-00-SG0-C0 PL-SLD-00-SG0-C0 PL-SLD-00-SG0-C1 PL-SLD-00-SG0-C Description 80 nm . G VCSEL LC TOSA with common cathode 80 nm . G VCSEL LC TOSA with common anode 80 nm . G VCSEL LC TOSA  pin differential drive 80 nm . G VCSEL LC TOSA  pin differential drive alternate pinout 80 nm . G VCSEL LC TOSA  pin differential drive alternate pinout NORTH AMERICA: 800 498-JDSU (5378) wORLDwIDE: +800 5378-JDSU wEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30149332 000 0308 PL-SLX-00-SG0-CX.DS.CC.AE March 2008