PL-XXD-00-S40-CX

COMMUNICATIONS COMpONENTS 850 nm 10 G TOSA PL-xxD-00-S40-Cx Key Features • Data rates up to 10 Gbps • -10 °C to 85 °C operation • Optical power monitor with excellent tracking • Multiple pinout options available • VCSEL TO-can aligned to LC or SC optical housing • Optional flex attach to PCBA Benefits • Industry standard housing dimensions • Very high reliability Low FIT High MTBF • Excellent performance over extended operational temperatures • Modulation performance verification The JDSU 850 nm 10 Gbps connectorized TOSA product (Transmit Optical SubAssembly) is designed for high-speed data communication applications in 10 Gbps transceiver modules. The product utilizes a high performance, high reliability VCSEL integrated in a custom hermetically sealed TO package aligned to a precision LC or SC housing. The device is configured for differential drive and a controlled impedance flex circuit is available for optimum performance. Each unit receives JDSU’s proprietary burn-in and stabilization process to insure a low failure rate and long life expectancy while providing continuously consistent performance. The PL-xxD-00-S40-Cx converts an electrical signal into optical power at data rates up to 10 Gbps and it is designed for performance over extended operating temperature and power conditions with high reliability. It is perfectly suited for 50/125 mm multimode fiber. Each part is electro-optically tested to exacting standards. NORTH AMERICA: 800 498-JDSU (5378) wORlDwIDE: +800 5378-JDSU wEBSITE: www.jdsu.com 850 NM 10 G TOSA  TOSA with Flex Dimensions (SC) UNITS: MM .X = 0.2 . XX = 0.10 .XXX = 0.050 1.09 2 1.03 5 7.26 4 +0 .050 6.73 1 -0 .025 A 5X 1 PIN 2 PIN 3 3.12 4 4.62 3±0.02 5 PIN 4 90°±10 ° BARREL KEYING FEATURE 1.21 9 5.74 +0.38 6.54 - 0 .2 5 A 10.80 PIN 1 2.28 PIN 5 PAD 6 PAD 1 0.80 PAD PITCH 6X 1.12 0 OPTICAL REF PLANE 0.13 0. 5 B 4.84 0 6.24 8 0.40 6.12 1 4X 0.92 12 X 6X 0.46 SECTION A-A 4X 0.38 C L 2X 0.71 0 0 .300 DETAIL B pinout pl-FxC-00-S40-C4 (5-lead TOSA, Anode drive, with flex) pad Symbol Function 1 2 3 4 5 6 APD GND ALD NC GND KPD Monitor Anode Case/GND VCSEL Anode Not Connected Case/GND Monitor Cathode pl-FxD-00-S40-C5 (5-lead TOSA, Differential drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD GND ALD KLD GND APD Monitor Cathode Case/ GND VCSEL Anode VCSEL Cathode Case/GND Monitor Anode pl-FxA-00-S40-C6 (5-lead-TOSA, Cathode drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD, ALD GND KLD NC GND APD Vcc, Monitor Cathode, VCSEL Anode Case/GND VCSEL Cathode Not Connected Case/GND Monitor Anode 850 NM 10 G TOSA  TOSA with Flex Dimensions (lC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 2X 5.94 1 6.59 9 +0 .050 4.03 9- 0 .025 0.66 0 1 A PIN 2 PIN 3 PIN 4 2.08 3±0.02 5 BARREL KEYING FEATURE 5.08 0+0.02 5 - 0.07 6 PIN 1 2.92 1±0.02 5 0.83 8±0.02 5 90°± 10 ° 1.27 0 +0.3 8 6.54 0.2 5 - A PIN 5 10.8 0 PAD 6 PAD 1 0.80 PAD PITCH OPTICAL REF PLANE 2X 2.28 45.0 °±0.5° 0.40 0.13 0. 5 B 4.84 0 4.03 9 0.92 1.12 45.0°±0.5° 4.16 6 SECTION A-A 0.46 4X 0.38 12 X 2X 0.71 0.30 DETAIL B pinout pl-FxC-00-S40-C4 (5-lead TOSA, Anode drive, with flex) pad Symbol Function 1 2 3 4 5 6 APD GND ALD NC GND KPD Monitor Anode Case/GND VCSEL Anode Not Connected Case/GND Monitor Cathode pl-FxD-00-S40-C5 (5-lead TOSA, Differential drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD GND ALD KLD GND APD Monitor Cathode Case/ GND VCSEL Anode VCSEL Cathode Case/GND Monitor Anode pl-FxA-00-S40-C6 (5-lead-TOSA, Cathode drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD, ALD GND KLD NC GND APD Vcc, Monitor Cathode, VCSEL Anode Case/GND VCSEL Cathode Not Connected Case/GND Monitor Anode 850 NM 10 G TOSA 4 5-lead TOSA without Flex Dimensions (lC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 4.039 2.083 ±0.025 0.838 ±0.025 +0.050 - 0.025 0.660 5X 13.460 PIN 5 PIN 4 2X 0.250 2X 57° PIN 1 B 2X 5.941 45° ±1° 5.080 +0.025 - 0.076 1.397 2X 82° 3X 2.921 ±0.025 6.599 BARREL KEYING FEATURE 1.270 +0.38 6.54 - 0.25 0.440 PIN 2 PIN 3 2.540 B 10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL 4.039 OPTICAL REF PLANE 4.166 45° ±1° SECTION B-B pinout pl-SlD-00-S40-C5 (5-lead-TOSA, Differential drive, no flex) pad Symbol Function 1 2 3 4 5 ALD KPD APD KLD GND VCSEL Anode Monitor Cathode Monitor Anode VCSEL Cathode Case/GND 850 NM 10 G TOSA  4-lead TOSA without Flex Dimensions (SC) UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 1.09 2 1.035 7.264 +0.05 0 6.731 -0 .025 4X 13.46 0 A 2.54 0 PIN 3 PIN 4 2X 45° 4.623±0.02 5 3.124 BARREL KEYING FEATURE ( 1 0 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL ) 1.219 5.74 6.55+0 .3 8 - 0 .2 5 OPTICAL REF PLANE A PIN 2 PIN 1 2X 45° 4X 0.45 5 6.248 6.121 pinout pl-SxD-00-S40-C2 (4-lead TOSA, no flex) pin Symbol Function 1 2 3 4 ALD KLD APD KPD VCSEL Anode VCSEL Cathode Monitor Anode Monitor Cathode6 850 NM 10 G TOSA  4-lead TOSA without Flex Dimensions (lC) 01 P01 INITIAL RELEASE ALIGN NOTCH ROTATED 90º CW ; TITLE WAS 10G 005827 006411 DWP DWP 21 AUG 06 27 SEP 06 JD SM 22 AUG 0 28 AUG 0 UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 +0.050 4.039 - 0.025 10 ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSEMBLY AND BARREL 2.083±0.025 0.838±0.025 A +0.025 - 0.076 2.921±0.025 PIN 4 13.46 ±0.76 PIN 3 2X 45° 45.0°±0.5° 5.941 5.080 2X 45° A LC BARREL ID 6.599 A 0.660 1.270 ±0.025 6.55 +0.37 - 0.25 PIN 2 PIN 1 2.540 4X 0.455 4.039 OPTICAL REF PLANE 45.0°±0.5° 4.166 SECTION A-A pinout pl-SxD-00-S40-C2 (4-lead TOSA, no flex) pin Symbol Function 1 2 3 4 ALD KLD APD KPD VCSEL Anode VCSEL Cathode Monitor Anode Monitor Cathode Absolute Maximum Ratings parameter Storage temperature Lead solder temperature Flex attach temperature Laser forward current at 85 °C1 Laser forward current at 70 °C2 Laser reverse voltage Photodiode forward current ESD3 Symbol Tst Ts TF If If BVRLD Ifm Ratings -40 to +100 260 °C for 10 sec. 2 mm from case 370 °C for 10 sec. 7 8 -2 2 Class 1 Unit °C mA mA V mA Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability. 1. Absolute maximum at 85 °C case operating temperature 2. Absolute maximum at 70 °C case operating temperature 3. HBM 850 NM 10 G TOSA  Shipping Information Shipped in anti-static stackable trays. Electro-optical Characteristics (Tcase = 25 °C , CW operation unless otherwise stated) parameter VCSEL Peak emission wavelength Case operating temperature RMS spectral width lp temp coefficient Relative intensity noise1 Rise/Fall time Symbol lp Top Dl Dlp RIN12 tr tf Ith DIth Vf Rs Rs efiber h Dh/DT CLD Test Condition Min. Typ. Max. Unit Pout=0.5 mW Pout=0.5 mW; 10.3125Gb/s mod. 840 -10 850 860 85 0.4 nm °C nm nm/°C dB/Hz psec 0.06 10.3125Gb/s mod. Pout=0.5 mW, 10.3125Gb/s, 20-80%, filtered T= -10 °C to 85 °C Pout=0.5 mW Pout=0.5 mW Pout=0.5 mW Pout=0.5 mW 6mA bias Pout=0.5 mW 130 45 50 1 +1.0 2.0 100 60 75 -4000 0.6 7.75 -12 1.3 +2.0 2.4 110 75 0.175 Threshold current Ith temperature variation Laser forward voltage Series resistance2 Series resistance3 Coupling efficiency Slope efficiency4 Slope efficiency temperature variation Total capacitance @ VCSEL Small signal bandwidth Optical return loss Monitor Photodiode Photocurrent Monitor current tracking5 90 50 0.105 mA mA V W W % mW/mA PPM/°C pF GHz dB mA dB IPD DIm ID CM Monitor dark current Monitor capacitance Pout=0.5 mW Vr = 1.5 V Pout=0.5 mW T = -10 °C to 85 °C Vrm = 1.5 V Vr = 1.5 V Vrm = 1.5 V 0.12 -0.25 0.6 0.25 500 50 nA pF 1. Measured according to IEEE802.3 for RIN under Modulation. 2. Applies to PL-SxD-00-S40-C2 and PL-FxD-00-S40-C5 3. Applies to PL-FxC-00-S40-C4 and PL-FxA-00-S40-C6 4. Includes connector repeatability, ferrule concentricity, and diameter (50 mm fiber). 5. For constant monitor current. Does not include the effect of fiber coupling efficiency. 850 NM 10 G TOSA Order Information For more information on this or other products and their availability, please contact your local JDSU account manager or J DSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at c ustomer.service@jdsu.com. Sample: pl-SSD-00-S40-C2 10 G, TOSA without Flex Circuit part Number PL-SSD-00-S40-C PL-SLD-00-S40-C PL-SLD-00-S40-C Description Differential drive TOSA with SC housing, 4 leads Differential drive TOSA with LC housing, 4 leads Differential drive TOSA with LC housing,  leads 10 G, 5-lead TOSA with Flex Circuit part Number PL-FSC-00-S40-C4 PL-FLC-00-S40-C4 PL-FSD-00-S40-C PL-FLD-00-S40-C PL-FSA-00-S40-C PL-FLA-00-S40-C Description Anode-drive TOSA with SC housing with flex Anode-drive TOSA with LC housing with flex Differential drive TOSA with SC housing with flex Differential drive TOSA with LC housing with flex Cathode-drive TOSA with SC housing with flex Cathode-drive TOSA with LC housing with flex NORTH AMERICA: 800 498-JDSU (5378) wORlDwIDE: +800 5378-JDSU wEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30149334 501 0408 PL-XXD-00-S40-CX.DS.CC.AE April 2008